Advanced Li‐Ion Batteries with High Rate, Stability, and Mass Loading Based on Graphene Ribbon Hybrid Networks

Longhai Zhang, Tong Wei, Zimu Jiang, Zhuangjun FanChemistry 2019 · DOI

Abstract

To optimize the cycle life and rate performance of lithium-ion batteries (LIBs), ultra-fine Fe<sub>2</sub> O<sub>3</sub> nanowires with a diameter of approximately 2 nm uniformly anchored on a cross-linked graphene ribbon network are fabricated. The unique three-dimensional structure can effectively improve the electrical conductivity and facilitate ion diffusion, especially cross-plane diffusion. Moreover, Fe<sub>2</sub> O<sub>3</sub> nanowires on graphene ribbons (Fe<sub>2</sub> O<sub>3</sub> /GR) are easily accessible for lithium ions compared with the traditional graphene sheets (Fe<sub>2</sub> O<sub>3</sub> /GS). In addition, the well-developed elastic network can not only undergo the drastic volume expansion during repetitive cycling, but also protect the bulk electrode from further pulverization. As a result, the Fe<sub>2</sub> O<sub>3</sub> /GR hybrid exhibits high rate and long cycle life Li storage performance (632 mAh g<sup>-1</sup> at 5 A g<sup>-1</sup> , and 471 mAh g<sup>-1</sup> capacity maintained even after 3000 cycles). Especially at high mass loading (≈4 mg cm<sup>-2</sup> ), the Fe<sub>2</sub> O<sub>3</sub> /GR can still deliver higher reversible capacity (223 mAh g<sup>-1</sup> even at 2 A g<sup>-1</sup> ) compared with the Fe<sub>2</sub> O<sub>3</sub> /GS (37 mAh g<sup>-1</sup> ) for LIBs.
BibTeX
@inproceedings{zhang2019advanced,
  author = {Longhai Zhang and Tong Wei and Zimu Jiang and Zhuangjun Fan},
  title = {{Advanced Li‐Ion Batteries with High Rate, Stability, and Mass Loading Based on Graphene Ribbon Hybrid Networks}},
  booktitle = {Chemistry},
  year = {2019},
  doi = {10.1002/chem.201805869},
}

Loading related content...

Figure