Adsorption Kinetics and Isotherms of Cd (II), As (III), and Pb (II) on Green Zn-Mn Ferrite Soft Magnetic Material

Jia Wang, Mengxiang Guan, Zijian Qin, Shihao Zhang, Jian Cheng, Baoping XinWater 2025 · DOI

TL;DR

This paper presents a novel method for preparing Zn-Mn ferrite from spent batteries, demonstrating its effectiveness in removing toxic heavy metals (Cd, As, Pb) from wastewater. The material exhibits excellent magnetic properties for easy separation and efficient adsorption, offering a promising sustainable solution for heavy metal remediation.

What Problem Does This Paper Address?

Heavy metal contamination from industrial activities, particularly the battery industry, poses a significant threat to ecosystems and human health. While various wastewater treatment methods exist, they often suffer from limitations like sludge generation, high costs, or inefficient separation. The disposal of spent batteries, especially the prevalent zinc-manganese batteries (ZMBs), is a major contributor to this pollution. There's a critical need for cost-effective, efficient, and environmentally friendly methods to both recycle battery waste and remediate heavy metal pollution. This paper tackles this by developing a functional material from waste batteries that can simultaneously address both issues.

Methods

The core of this research lies in the synthesis of a Zn-Mn ferrite soft magnetic material (Mn$_{0.6}$Zn$_{0.4}$Fe$_2$O$_4$) from spent ZMBs. This was achieved through a multi-step process involving:

  • Bioleaching: Extracting valuable metals (Zn$^{2+}$ and Mn$^{2+}$) from the battery waste.
  • Co-precipitation: Combining the leached metal ions with iron sources to form precursor precipitates.
  • Boiling Reflux: A heat treatment process to crystallize the precursor into the desired spinel ferrite structure.

The synthesized material was then characterized for its structural and magnetic properties using X-ray Diffraction (XRD) and a Vibrating Sample Magnetometer (VSM).

The heavy metal adsorption studies involved:

  • Batch Experiments: Investigating the adsorption of Cd(II), As(III), and Pb(II) under varying conditions (pH, adsorbent concentration, temperature, and contact time).
  • Magnetic Separation: Utilizing the ferrite's magnetic properties for rapid separation of the adsorbent from the treated water.
  • Kinetic Modeling: Applying the pseudo-second-order kinetic model to understand the adsorption rate and mechanism.
  • Isotherm Modeling: Using Langmuir and Freundlich models to describe the adsorption equilibrium and capacity.
  • Activation Energy Calculation: Employing the Arrhenius equation to determine the energy barrier for the adsorption process.

Datasets

Not discussed in the paper. The study utilizes synthesized materials and simulated wastewater containing specific heavy metal ions.

Key Insights and Ideas

  • Waste Valorization: The successful synthesis of high-performance Zn-Mn ferrite from spent batteries highlights a promising route for upcycling electronic waste, turning a pollution source into a valuable resource.
  • Magnetic Separation Advantage: The inherent magnetic properties of the synthesized ferrite allow for extremely efficient and rapid separation of the adsorbent from the treated water (over 99.9% recovery), overcoming a major hurdle in traditional adsorption processes that often require energy-intensive centrifugation.
  • Endothermic Adsorption: The increase in adsorption capacity with rising temperature for all three heavy metals suggests an endothermic adsorption process, which can be advantageous for certain operational strategies.
  • Chemisorption Dominance: The strong correlation with the pseudo-second-order kinetic model and the Langmuir isotherm model points towards a chemisorption mechanism, where chemical bonding plays a significant role in the adsorption process.

Key Results

  • Material Synthesis: A green Zn-Mn ferrite (Mn$_{0.6}$Zn$_{0.4}$Fe$_2$O$_4$) was successfully prepared from spent ZMBs.
  • Magnetic Properties: The material exhibited optimal magnetic properties with saturation magnetization (Ms) of 68.9 emu/g, residual magnetization (Mr) of 4.7 emu/g, and coercivity (Hc) of 53.6 Oe.
  • Adsorption Performance:
    • Optimal adsorption conditions were found to be pH 3.0-5.0 and a temperature of 25 °C.
  • Maximum adsorption capacities (qm) were determined as: Cd(II) = 22.9 mg/g, As(III) = 8.7 mg/g, and Pb(II) = 33.9 mg/g.
  • The Langmuir model provided a superior fit for adsorption equilibrium, with R$^2$ values consistently above 0.99 for all metals.
  • The pseudo-second-order kinetic model accurately described the adsorption kinetics.
  • Adsorption rates followed the sequence: Pb(II) > Cd(II) > As(III).
  • Activation Energies (Ea): The calculated activation energies were 9.5 kJ/mol for Cd(II), 32.2 kJ/mol for As(III), and 1.4 kJ/mol for Pb(II), indicating a chemisorption-driven process.

Limitations and Future Work

  • pH Sensitivity: While the ferrite shows good acid resistance, the optimal adsorption performance is observed within a specific pH range (3.0-5.0). Further research could explore surface modifications to broaden the effective pH range.
  • Single Metal Ion Studies: The adsorption studies were conducted for individual metal ions. Future work should investigate the adsorption behavior in mixed metal ion solutions to better simulate real-world wastewater conditions.
  • Long-term Stability and Reusability: While the paper mentions high removal efficiency, detailed studies on the long-term stability and reusability of the adsorbent over multiple cycles in real wastewater would be beneficial.
  • Scale-up Potential: The study demonstrates promising results at the lab scale. Investigating the scalability of the synthesis process and the performance of the adsorbent in pilot-scale or industrial applications would be a crucial next step.
  • Mechanism Elucidation: While chemisorption is indicated, further in-depth mechanistic studies (e.g., spectroscopic analysis) could provide a more detailed understanding of the surface interactions between the ferrite and the heavy metal ions.

Summary updated

Abstract

In this study, a Zn-Mn ferrite soft magnetic material (Mn0.6Zn0.4Fe2O4) was successfully prepared from a spent Zn-Mn battery using a novel multi-step process involving bioleaching, co-precipitation, and boiling reflux. The green Zn–Mn ferrite exhibited optimal magnetic properties, with Ms, Mr, and Hc values of 68.9 emu/g, 4.7 emu/g, and 53.6 Oe, respectively. The adsorption kinetics and isotherms of Cd (II), As (III), and Pb (II) in wastewater on Mn0.6Zn0.4Fe2O4 were subsequently investigated. The sorption dosages of Cd (II), As (III), and Pb (II) were 22.9 mg/g, 8.7 mg/g, and 33.9 mg/g, respectively. The pseudo-second-order kinetic model provided a fitting correlation with the experimental data. The adsorption process exhibited a good correlation with the Langmuir model, with R2 = 0.997, and the qm and b values were 33.44 mg/g and 2.43 L/mg, respectively. The sorption rates followed the sequence Pb (II) > Cd (II) > As (III). On increasing the temperature, the saturated adsorption capacity of the Cd (II), As (III), and Pb (II) increased, thus indicating that the adsorption reaction was endothermic, with the corresponding activation energy (Ea) values determined to be 9.5 KJ/mol, 32.2 KJ/mol, and 1.4 KJ/mol, respectively.
BibTeX
@inproceedings{wang2025adsorption,
  author = {Jia Wang and Mengxiang Guan and Zijian Qin and Shihao Zhang and Jian Cheng and Baoping Xin},
  title = {{Adsorption Kinetics and Isotherms of Cd (II), As (III), and Pb (II) on Green Zn-Mn Ferrite Soft Magnetic Material}},
  booktitle = {Water},
  year = {2025},
  doi = {10.3390/w17111630},
}
Figure