Adsorption and Diffusion Characteristics of CO2 and CH4 in Anthracite Pores: Molecular Dynamics Simulation

Yufei Gao, Yaqing Wang, Xiaolong ChenProcesses 2024 · DOI

TL;DR

This paper uses molecular dynamics simulations to investigate how CO2 and CH4 interact within anthracite coal pores, focusing on adsorption and diffusion. The findings reveal that CO2 is more strongly adsorbed than CH4, and while CH4 diffuses faster, CO2's ability to displace CH4 makes it a promising candidate for enhanced coalbed methane recovery and CO2 sequestration.

What Problem Does This Paper Address?

Coalbed methane (CBM) is a significant natural gas source, but its extraction can be inefficient. CO2-enhanced coalbed methane recovery (CO2-ECBM) offers a dual benefit: increasing CBM production and sequestering CO2 underground. However, understanding the microscopic mechanisms of gas interaction within coal pores is crucial for optimizing this process. Previous studies often used simplified pore models (e.g., single organic pores). This paper addresses the need for a more realistic representation by simulating gas behavior in a composite pore model that includes both organic and inorganic components, aiming to provide a more accurate picture of adsorption and diffusion dynamics.

Methods

The researchers employed molecular dynamics (MD) simulations, a powerful computational technique for studying atomic and molecular behavior. They also utilized grand canonical Monte Carlo (GCMC) simulations to investigate the dynamic mechanism of CO2-ECBM. A key methodological contribution is the construction of a novel, realistic anthracite pore model that incorporates both inorganic montmorillonite layers and organic anthracite molecules. This composite model aims to better mimic the complex structure of actual coal seams. The simulations were conducted under various temperature and pressure conditions to analyze the adsorption and diffusion characteristics of CO2 and CH4. They calculated interaction energies, radial distribution functions (RDFs) to understand functional group influences, and mean square displacement (MSD) to determine diffusion coefficients.

Datasets

Not discussed in the paper. The study relies on simulated data generated from the constructed molecular model.

Key Insights and Ideas

  • CO2's Superior Adsorption: CO2 exhibits significantly stronger interaction energy with anthracite than CH4, indicating a higher adsorption capacity. This is a fundamental driver for CO2-ECBM, as CO2 can effectively displace CH4 from adsorption sites.
  • Displacement Mechanism: The simulations visually demonstrate that injected CO2 primarily occupies the adsorption sites previously held by CH4, leading to CH4 desorption.
  • CH4's Diffusion Advantage: Under identical conditions, CH4 diffuses faster than CO2 within the coal pores. This is attributed to CH4's tetrahedral structure compared to CO2's more linear, rod-like shape, which can lead to more frequent collisions and interactions with the pore walls.
  • Temperature's Role in Diffusion: While both gases diffuse faster at higher temperatures, CH4's diffusion coefficient shows a greater growth rate with increasing temperature. This suggests that CO2-ECBM might be particularly effective in higher-temperature coal seams.
  • Functional Group Influence: Specific functional groups within the anthracite play distinct roles. Hydroxyl groups are crucial for both CO2 and CH4 adsorption. Ether groups favor CH4 adsorption, while carbonyl groups are more influential for CO2 adsorption. This highlights the importance of coal composition in gas recovery.

Key Results

  • Interaction Energies: At 307.15 K and 101.35 kPa, the interaction energies were -1273.92 kJ·mol⁻¹ for CO2 and -761.53 kJ·mol⁻¹ for CH4, confirming CO2's stronger binding.
  • Adsorption Capacity: Under the same conditions, CO2 adsorption capacity was 0.577 mmol/g, significantly higher than CH4's 0.186 mmol/g.
  • Diffusion Coefficients: The study found CO2 diffusion coefficients in the range of 0.156–0.246 × 10⁻⁹ m²/s and CH4 diffusion coefficients in the range of 0.769–2.135 × 10⁻⁹ m²/s, consistent with literature values and showing CH4's higher mobility.
  • Temperature Effects: The growth rate of CH4's diffusion coefficient with temperature was higher than that of CO2, suggesting better performance in warmer conditions.

Limitations and Future Work

The authors acknowledge that while their composite pore model is more realistic than previous single-pore models, it is still a simplification of the complex, heterogeneous nature of real coal seams. Further research is needed to explore the synergistic adsorption effects between organic and inorganic components in more detail. The study also suggests that future work could investigate the impact of other gases (like N2 or water vapor) on CO2-ECBM and explore the influence of different types of coal and their varying pore structures. Additionally, while the study provides theoretical support, experimental validation of these simulation findings would be valuable.

Summary updated

Abstract

CO2-enhanced coalbed methane recovery (CO2-ECBM) has been demonstrated as an effective enhanced oil recovery (EOR) technique that enhances the production of coalbed methane (CBM) while achieving the goal of CO2 sequestration. In this paper, the grand canonical Monte Carlo simulation is used to investigate the dynamic mechanism of CO2-ECBM in anthracite pores. First, an anthracite pore containing both organic and inorganic matter was constructed, and the adsorption and diffusion characteristics of CO2 and CH4 in the coal pores under different temperature and pressure conditions were studied by molecular dynamics (MD) simulations. The results indicate that the interaction energy of coal molecules with CO2 and CH4 is positively associated with pressure but negatively associated with temperature. At 307.15 K and 101.35 kPa, the interaction energies of coal adsorption of single-component CO2 and CH4 are −1273.92 kJ·mol−1 and −761.53 kJ·mol−1, respectively. The interaction energy between anthracite molecules and CO2 is significantly higher compared to CH4, indicating that coal has a greater adsorption capacity for CO2 than for CH4. Furthermore, the distribution characteristics of gas in the pores before and after injection indicate that CO2 mainly adsorbs and displaces CH4 by occupying adsorption sites. Under identical conditions, the diffusion coefficient of CH4 surpasses that of CO2. Additionally, the growth rate of the CH4 diffusion coefficient as the temperature increases is higher than that of CO2, which indicates that CO2-ECBM is applicable to high-temperature coal seams. The presence of oxygen functional groups in anthracite molecules greatly influences the distribution of gas molecules within the pores of coal. The hydroxyl group significantly influences the adsorption of both CH4 and CO2, while the ether group has a propensity to impact CH4 adsorption, and the carbonyl group is inclined to influence CO2 adsorption. The research findings are expected to provide technical support for the effective promotion of CO2-ECBM technology.
BibTeX
@inproceedings{gao2024adsorption,
  author = {Yufei Gao and Yaqing Wang and Xiaolong Chen},
  title = {{Adsorption and Diffusion Characteristics of CO2 and CH4 in Anthracite Pores: Molecular Dynamics Simulation}},
  booktitle = {Processes},
  year = {2024},
  doi = {10.3390/pr12061131},
}
Figure