Adaptive Computing Optimization in Software-Defined Network-Based Industrial Internet of Things with Fog Computing

Juan Wang, Di LiSensors 2018 · DOI

TL;DR

This paper tackles the challenge of optimizing task processing in Industrial Internet of Things (IIoT) environments by proposing an adaptive computing framework. It introduces a novel method that intelligently selects the best computing mode (local, fog, or cloud) for each task and prioritizes their execution to ensure real-time performance and high reliability in smart factories.

What Problem Does This Paper Address?

The Industrial Internet of Things (IIoT) is rapidly expanding, connecting numerous devices in smart factories. While cloud computing offers powerful processing capabilities, its inherent latency and bandwidth demands can hinder real-time performance, which is critical for intelligent manufacturing. Fog computing, with its edge-based processing, offers a solution by reducing latency. However, effectively managing tasks across local devices, fog nodes, and the cloud presents a significant challenge. Specifically, the paper addresses two key problems: 1) determining the optimal computing mode (local, fog, or cloud) for each incoming task, and 2) defining an efficient execution sequence for tasks, particularly those utilizing fog computing, to meet strict Quality of Service (QoS) requirements like real-time performance and reliability.

Methods

The authors propose a Software-Defined Network (SDN)-based framework for IIoT that integrates fog computing. The core of their solution is the Adaptive Computing Optimization (ASTP) method, which comprises two main components:

  • Computing Mode Selection (CMS): An SDN controller module is designed to analyze task characteristics (data size, computation amount, maximum tolerable latency) and resource availability from local devices, fog nodes, and the cloud. It then employs a CMS algorithm to select the most optimal computing mode for each task, aiming to minimize computing cost and ensure real-time performance.
  • Task Execution Sequence Adjustment (ASTP): For tasks offloaded to fog computing, a novel execution sequence mechanism is introduced. This mechanism calculates a task priority based on two factors: the task's real-time intensity (inversely related to maximum tolerable latency) and its computational complexity (inversely related to calculation amount). Tasks with higher priority are executed earlier, ensuring that delay-sensitive tasks are processed promptly.

The SDN controller orchestrates this by sending flow tables to SDN switches to manage task transmission and execution order.

Datasets

Not discussed in the paper. The paper relies on simulations using defined parameter values for devices, network, and applications.

Key Insights and Ideas

  • Hybrid Computing is Key: The paper strongly advocates for a hybrid approach, leveraging local, fog, and cloud computing resources rather than relying solely on one. This allows for a more nuanced and efficient task distribution.
  • SDN as an Orchestrator: SDN's centralized control is crucial for enabling adaptive mode selection and dynamic task management in a complex IIoT environment.
  • Task Priority for Real-Time: Prioritizing tasks based on a combination of real-time requirements and computational load is essential for guaranteeing QoS in time-sensitive industrial applications.
  • Balancing Latency and Complexity: The ASTP method's intelligent weighting of real-time intensity and computational complexity offers a sophisticated way to manage task queues, ensuring that critical tasks are not delayed by less urgent but computationally intensive ones.
  • The "Why" Behind Performance: The paper effectively explains why their proposed method outperforms others, linking performance gains directly to the adaptive mode selection and prioritized execution strategies.

Key Results

The proposed ASTP method was evaluated through simulations and demonstrated significant improvements across several metrics compared to conventional methods (RSCM, RSTP, ASCM):

  • Total Time Delay: ASTP achieved the lowest total time delay, outperforming other methods across varying numbers of devices.
  • Average Time Delay: ASTP consistently showed a lower average time delay, indicating faster processing for individual tasks.
  • Reliability: ASTP exhibited higher reliability, with a significantly lower task failure rate, especially as the number of devices increased. The paper notes that random mode selection (RSCM) led to a reliability drop to approximately 70% at 100 devices.
  • Satisfaction: ASTP resulted in the highest user satisfaction, reflecting its ability to meet real-time demands and provide a better overall QoS.

Limitations and Future Work

  • Limitations:
    • The paper does not consider energy consumption problems, focusing solely on real-time performance.
  • The simulation setup uses predefined parameter values and does not involve real-world datasets.
  • Future Work:
    • The authors suggest extending the research to provide continuous computing services for mobile devices.
  • They also propose exploring complex task decomposition and collaborative computing among fog nodes.

Summary updated

Abstract

In recent years, cloud computing and fog computing have appeared one after the other, as promising technologies for augmenting the computing capability of devices locally. By offloading computational tasks to fog servers or cloud servers, the time for task processing decreases greatly. Thus, to guarantee the Quality of Service (QoS) of smart manufacturing systems, fog servers are deployed at network edge to provide fog computing services. In this paper, we study the following problems in a mixed computing system: (1) which computing mode should be chosen for a task in local computing, fog computing or cloud computing? (2) In the fog computing mode, what is the execution sequence for the tasks cached in a task queue? Thus, to solve the problems above, we design a Software-Defined Network (SDN) framework in a smart factory based on an Industrial Internet of Things (IIoT) system. A method based on Computing Mode Selection (CMS) and execution sequences based on the task priority (ASTP) is proposed in this paper. First, a CMS module is designed in the SDN controller and then, after operating the CMS algorithm, each task obtains an optimal computing mode. Second, the task priorities can be calculated according to their real-time performance and calculated amount. According to the task priority, the SDN controller sends a flow table to the SDN switch to complete the task transmission. In other words, the higher the task priority is, the earlier the fog computing service is obtained. Finally, a series of experiments and simulations are performed to evaluate the performance of the proposed method. The results show that our method can achieve real-time performance and high reliability in IIoT.
BibTeX
@inproceedings{wang2018adaptive,
  author = {Juan Wang and Di Li},
  title = {{Adaptive Computing Optimization in Software-Defined Network-Based Industrial Internet of Things with Fog Computing}},
  booktitle = {Sensors},
  year = {2018},
  doi = {10.3390/s18082509},
}
Figure