Activating sulfur oxidation reactionviasix-electron redox mesocrystal NiS2 for sulfur-based aqueous batteries

Zhoudong Yang, Boya Wang, Yongjin Chen, Wanhai Zhou, Hongpeng Li, Ruizheng Zhao, Xinran Li, Tengsheng Zhang, Fanxing Bu, Zaiwang Zhao, Wei Li, Dongliang Chao, Dongyuan ZhaoNational 2022 · DOI

TL;DR

Researchers have developed a novel mesocrystal NiS₂ (M-NiS₂) material that significantly enhances the performance of sulfur-based aqueous batteries (SABs). By enabling a highly efficient six-electron redox reaction, this new material overcomes key limitations of traditional sulfur electrodes, paving the way for safer, lower-cost, and higher-energy aqueous batteries.

What Problem Does This Paper Address?

Aqueous batteries (ABs) are attractive for large-scale energy storage due to their safety and low cost. However, their energy density is often limited by the relatively low voltage and specific capacity of common electrode materials. Sulfur-based aqueous batteries (SABs) offer a promising solution, boasting a theoretically high capacity. The major hurdle for SABs has been the poor reversibility and sluggish kinetics of elemental sulfur's electrochemical reactions. Specifically, the sulfur oxidation reaction (SOR), which occurs during charging, is thermodynamically and kinetically challenging, leading to issues like polysulfide shuttling, gas evolution, and capacity fade. This paper tackles the challenge of improving the efficiency and stability of the SOR process in SABs.

Methods

The researchers synthesized mesocrystal NiS₂ (M-NiS₂) nanoparticles using a surfactant-free solvothermal method. They characterized the material's structure and composition using techniques like X-ray Diffraction (XRD), Raman spectroscopy, Fourier-transform infrared spectroscopy (FTIR), and Transmission Electron Microscopy (TEM), including Energy Dispersive X-ray (EDX) elemental mapping and High-Angle Annular Dark-Field Scanning Transmission Electron Microscopy (HAADF-STEM).

Electrochemical performance was evaluated using cyclic voltammetry (CV), galvanostatic charge-discharge (GCD) cycling, and electrochemical impedance spectroscopy (EIS). They compared the M-NiS₂ electrode's performance against commercial NiS₂ (C-NiS₂) and other reported sulfur-based cathode materials. To understand the reaction mechanisms, they employed ex-situ XRD and in-situ EIS measurements at various stages of charge and discharge. Thermodynamic analysis was performed using Gibbs free energy calculations. Finally, a proof-of-concept M-NiS₂ || Zn hybrid aqueous battery was assembled and tested.

Datasets

Not discussed in the paper. The study focuses on experimental synthesis and electrochemical testing of a novel material.

Key Insights and Ideas

  • Six-Electron Redox Activation: The core innovation is activating a six-electron redox process in M-NiS₂, moving beyond the typical two-electron transfer of elemental sulfur. This is achieved through a unique solid-to-solid conversion mechanism involving NiS₂ as an intermediate.
  • Mesocrystal Structure is Key: The mesocrystal structure of NiS₂ is crucial. It provides a favorable morphology with mesopores, enhancing electrolyte penetration, ionic transport, and creating a conductive network that facilitates the redox reactions.
  • Overcoming Sulfur's Limitations: The M-NiS₂ approach effectively circumvents the issues associated with elemental sulfur, such as polysulfide shuttling and gas evolution, by enabling a more direct and stable solid-state conversion.
  • Catalytic Role of M-NiS₂: The M-NiS₂ material appears to act as a catalyst, lowering the activation energy for the sulfur oxidation reaction and improving the overall kinetics compared to bulk NiS₂.
  • High SOR Efficiency: The developed M-NiS₂ electrode achieves an impressive sulfur oxidation reaction (SOR) efficiency of approximately 96.0%, a significant improvement over previous SABs.

Key Results

  • High Reversible Capacity: The M-NiS₂ electrode delivered a high reversible specific capacity of 1258 mAh g⁻¹ at 1 A g⁻¹, approaching the theoretical value for a six-electron transfer.
  • Excellent Rate Capability: It exhibited ultrafast reaction kinetics, achieving 932 mAh g⁻¹ at a high current density of 12 A g⁻¹.
  • Long-Term Cyclability: The electrode demonstrated remarkable long-term stability, retaining 61.7% of its capacity after 2000 cycles at a high rate of 20 A g⁻¹.
  • M-NiS₂ vs. C-NiS₂: Compared to commercial NiS₂, M-NiS₂ showed significantly lower charge transfer resistance and a higher ionic diffusion coefficient, attributed to its mesocrystal structure.
  • M-NiS₂ || Zn Hybrid Battery: A proof-of-concept M-NiS₂ || Zn hybrid aqueous battery achieved an output voltage of 1.60 V and a high energy density of 722.4 Wh kg⁻¹ (based on cathode material mass), outperforming many previously reported SABs.

Limitations and Future Work

  • Catalytic Mechanism Exploration: While the paper suggests a catalytic role for M-NiS₂ in the sulfur oxidation reaction, further in-depth studies are recommended to fully elucidate this mechanism.
  • Comparison to State-of-the-Art: The authors acknowledge that the energy density of their hybrid aqueous battery, while superior to many SABs, cannot yet match state-of-the-art lithium-ion batteries (LIBs).
  • Practical Scalability: While the synthesis method is described as surfactant-free solvothermal, further research would be needed to assess the scalability and cost-effectiveness for large-scale industrial production.
  • Electrolyte Stability: Although aqueous batteries are generally safer, the long-term stability of the electrolyte under high-energy cycling conditions could be a factor for future investigation.

The work opens a new avenue for developing high-energy aqueous batteries, suggesting that activating specific redox pathways within well-designed mesocrystal materials is a promising strategy for future energy storage solutions.

Summary updated

Abstract

Sulfur-based aqueous batteries (SABs) are deemed promising candidates for safe, low-cost, and high-capacity energy storage. However, despite their high theoretical capacity, achieving high reversible value remains a great challenge due to the thermodynamic and kinetics problems of elemental sulfur. Here, the reversible six-electron redox electrochemistry is constructed by activating the sulfur oxidation reaction (SOR) process of the elaborate mesocrystal NiS<sub>2</sub> (M-NiS<sub>2</sub>). Through the unique 6e<sup>-</sup> solid-to-solid conversion mechanism, SOR efficiency can reach an unprecedented degree of <i>ca.</i> 96.0%. The SOR efficiency is further revealed to be closely associated with the kinetics feasibility and thermodynamic stability of the M-NiS<sub>2</sub> intermedium in the formation of elemental sulfur. Benefiting from the boosted SOR, compared with the bulk electrode, the M-NiS<sub>2</sub> electrode exhibits a high reversible capacity (1258 mAh g<sup>-1</sup>), ultrafast reaction kinetics (932 mAh g<sup>-1</sup> at 12 A g<sup>-1</sup>), and long-term cyclability (2000 cycles at 20 A g<sup>-1</sup>). As a proof of concept, a new M-NiS<sub>2</sub>‖Zn hybrid aqueous battery exhibits an output voltage of 1.60 V and an energy density of 722.4 Wh kg<sub>cath</sub><sup>-1</sup>, which opens a new opportunity for the development of high-energy aqueous batteries.
BibTeX
@inproceedings{yang2022activating,
  author = {Zhoudong Yang and Boya Wang and Yongjin Chen and Wanhai Zhou and Hongpeng Li and Ruizheng Zhao and Xinran Li and Tengsheng Zhang and Fanxing Bu and Zaiwang Zhao and Wei Li and Dongliang Chao and Dongyuan Zhao},
  title = {{Activating sulfur oxidation reaction<i>via</i>six-electron redox mesocrystal NiS2 for sulfur-based aqueous batteries}},
  booktitle = {National},
  year = {2022},
  doi = {10.1093/nsr/nwac268},
}
Figure