TL;DR
This paper presents an improved method for accurately measuring the curvature and apparent contact angle of liquid menisci in constrained vapor bubble (CVB) heat exchangers. By developing a new analytical expression and conducting a thorough error analysis, the authors demonstrate how to obtain reliable pressure field data, crucial for understanding and optimizing microscale heat transfer processes.
What Problem Does This Paper Address?
Microscale heat transfer, particularly in systems like evaporating extended menisci, is governed by intricate interfacial phenomena. The pressure and temperature gradients at the liquid-vapor interface are critical drivers of fluid flow and phase change. However, accurately measuring these interfacial properties, specifically the curvature of the liquid meniscus and the apparent contact angle, has been a significant challenge. Existing methods often struggle with resolution limitations and the complex interplay of factors like disjoining pressure and viscous stresses. This paper aims to address this by providing a more accurate and robust technique for these critical measurements, enabling better understanding and prediction of heat transfer in microscale devices.
Methods
The core of this paper lies in an improved analytical technique for determining the curvature and apparent contact angle from experimental film thickness profiles. The authors derive a new analytical expression for curvature as a function of the film thickness profile and the apparent contact angle. This expression is then used in conjunction with experimental interference fringe data (which reveal film thickness) to simultaneously determine the curvature and apparent contact angle through a best-fitting algorithm.
A significant contribution is the detailed error analysis performed. The authors define an error term ($E_r$) related to the resolution of the image processing system and systematically investigate how various factors influence it. These factors include:
- System Resolution: The pixel size of the imaging system.
- Number of Dark Fringes: The quantity of interference fringes used for fitting.
- Apparent Contact Angle ($\theta_c$): The angle at the liquid-wall contact line.
- Wavelength ($\lambda$): The wavelength of the light used for interferometry.
- Refractive Index ($n_l$): The refractive index of the liquid.
This analysis allows for the identification of optimal experimental conditions and provides a quantitative understanding of measurement uncertainties.
Datasets
The paper utilizes experimental data obtained from a vertical Constrained Vapor Bubble (CVB) heat exchanger setup. The working fluid used was 99.9% pure pentane. The experimental data consists of interference fringe patterns captured using a microscope and CCD camera, which are then processed to yield film thickness profiles. No new benchmark datasets are introduced; rather, existing experimental setups and techniques are leveraged and improved upon.
Key Insights and Ideas
- Interferometry is Powerful, but Error Prone: While interferometry is a valuable tool for visualizing thin liquid films and their profiles, its accuracy is highly sensitive to system resolution and the quality of the fringe data.
- Curvature and Contact Angle are Intertwined: The paper demonstrates that these two parameters can be simultaneously determined from the film profile, highlighting their coupled nature in defining the interfacial shape.
- Disjoining Pressure Matters Near Thin Films: The accuracy of the data fitting algorithm can be used to delineate regions where disjoining pressure significantly influences the meniscus shape, particularly in thinner film regions.
- Wavelength and Fringe Count are Critical for Accuracy: The choice of light source wavelength and the number of interference fringes used in the analysis directly impact the measurement error. Green light was found to be a good compromise for pentane experiments.
- Experimental Cell Size for Microgravity: The relatively large experimental cell size was chosen to mimic conditions relevant for future microgravity experiments, where capillary pressure effects are more pronounced.
Key Results
- The developed analytical expression and fitting technique allowed for the measurement of film profiles and the determination of curvature in the range of $7532 \, m^{-1} < K \le 5.45 \times 10^4 \, m^{-1}$.
- Experimental results for isothermal CVB conditions showed excellent agreement (accuracy of 0.58%) with the theoretical film profile when fitting data above 0.3 µm, indicating a constant curvature of $9115 \, m^{-1}$.
- Including data from the zeroth dark fringe (near 0.1 µm) led to a larger deviation (up to 1.93%), suggesting the influence of disjoining pressure or minor evaporation/condensation effects in that region.
- The error analysis revealed that error increases with increasing curvature, apparent contact angle, and decreases with increasing wavelength and number of dark fringes.
- For non-isothermal CVB conditions, experimental film profiles were compared with theoretical results, showing good agreement. The curvature in the evaporator region increased significantly closer to the heater, driving fluid flow.
Limitations and Future Work
- System Resolution: The authors acknowledge that higher resolution CCD cameras could further reduce measurement errors, especially for higher curvatures.
- Non-Isothermal Effects: While the paper presents non-isothermal results, the detailed interfacial temperature field requires numerical determination, which is beyond the scope of this work.
- Future Work: The paper's findings are directly applicable to future microgravity experiments, suggesting that the developed techniques will be crucial for understanding heat and mass transfer in such environments. The ability to accurately measure pressure fields is highlighted as a key advantage for studying transport processes.
Summary updated