Ab initio calculated dynamic structure factor and optical properties of beryllium along the Hugoniot

Weijie Li, Jie Zhou, Zhe Ma, Zi Li, Yunliang Zhu, Handong Hu, Hao Ma, Cong Wang, Ping ZhangarXiv 2023 · DOI · arXiv

Abstract

Beryllium is an ablator material in the inertial-confinement fusion and hypervelocity impact studies. The thermoelastic properties, structure factors, and optical properties of beryllium are important in these studies. In this paper, the static structure factors, ion-ion dynamic structure factors, adiabatic velocity, and optical properties of beryllium along the Hugoniot were calculated by ab initio simulations. The static structure factors show that beryllium atoms were randomly distributed. The dynamic structure factors via the scattering function have extracted the dispersion relation for the collective excitations. By collecting the peak position of dynamic structure factors, the dispersion relation and adiabatic sound velocity were derived by definitions. By the calculated equation of state, the thermoelastic properties and adiabatic sound velocity have been derived. The two calculated methods about adiabatic sound velocity were verified to be equivalent.

Introduction

Beryllium is a critical material in high-energy-density physics, particularly as an ablator in inertial-confinement fusion (ICF) and hypervelocity impact research. In these applications, beryllium is subjected to extreme pressures and temperatures, transitioning into the "warm dense matter" regime. Accurate modeling of these experiments requires precise knowledge of the material's equation of state (EOS), sound velocity, and optical properties. Given the difficulty and cost of experimental measurements under such conditions, high-fidelity ab initio simulations are essential for predicting material behavior and validating theoretical models.

Methods

This study utilizes Ab Initio Molecular Dynamics (AIMD) simulations to explore the properties of beryllium along the Hugoniot curve. Simulations were performed using the VASP code with Projector Augmented Wave (PAW) potentials and the Generalized Gradient Approximation (GGA). The system comprised 216 beryllium atoms in an NVT ensemble, covering densities from 3.8 to 5.8 g/cm³ and temperatures from 0.95 to 10.65 eV.

The researchers calculated both static structure factors ($S(q)$) and ion-ion dynamic structure factors ($S(q, \omega)$). A primary objective was to derive the adiabatic sound velocity ($V_P$) through two independent paths:

  1. Microscopic Path: Extracting the dispersion relation from the peaks of the dynamic structure factors.
  2. Macroscopic Path: Utilizing the calculated EOS and thermoelastic relations.

Structural and Dynamic Properties

The static structure factors $S(q)$ reveal that beryllium maintains a liquid-like or plasma state under Hugoniot conditions, characterized by a lack of long-range crystalline order. As density increases, the primary peak of $S(q)$ shifts toward higher wave numbers, reflecting closer atomic packing, while its intensity decreases due to heightened thermal agitation.

Static structure factors $S(q)$ for beryllium at various densities along the Hugoniot. The inset shows the peak position and intensity as a function of density.

Key Results and Validation

The study successfully demonstrated the equivalence of the microscopic and macroscopic methods for determining sound velocity. The dynamic structure factors $S(q, \omega)$ provide insight into the collective excitations of the ions. By identifying the peak positions of $S(q, \omega)$ for various wave vectors $q$, the dispersion relation $\omega(q)$ was constructed. The slope of this relation in the long-wavelength limit ($q \to 0$) yields the adiabatic sound velocity.

(a) Ion-ion dynamic structure factors $S(q, \omega)$ and (b) derived dispersion relations $\omega(q)$ for beryllium at densities of 3.8 and 5.2 g/cm³. The dashed lines represent the linear fit used to determine sound velocity.

For instance, at a density of 3.8 g/cm³, the velocity derived from the dispersion relation (16.22 km/s) showed excellent agreement with the EOS-derived value (15.92 km/s), falling within an 8% margin. Across the investigated density range, $V_P$ was found to increase from 15.92 km/s to 25.22 km/s. Optical analysis using the Kubo-Greenwood formulation showed continuous absorption spectra, indicating that beryllium behaves as a dense condensed fluid rather than an atomic gas under these conditions.

Conclusion

This research provides a robust theoretical framework for understanding beryllium's behavior under extreme conditions. The validation of independent methods for calculating sound velocity enhances confidence in simulation-based predictions for ICF ablator design. Future work may address the limitations of finite system sizes and extend the model to the expansion phase where line-spectrum characteristics become dominant.

Summary updated

Abstract

Beryllium is an ablator material in the inertial-confinement fusion and hypervelocity impact studies. The thermoelastic properties, structure factors, and optical properties of beryllium are important in these studies. In this paper, the static structure factors, ion-ion dynamic structure factors, adiabatic velocity, and optical properties of beryllium along the Hugoniot were calculated by ab initio simulations. The static structure factors show that beryllium atoms were randomly distributed. The dynamic structure factors via the scattering function have extracted the dispersion relation for the collective excitations. By collecting the peak position of dynamic structure factors, the dispersion relation and adiabatic sound velocity were derived by definitions. By the calculated equation of state, the thermoelastic properties and adiabatic sound velocity have been derived. The two calculated methods about adiabatic sound velocity were verified to be equivalent.
BibTeX
@misc{li2023ab,
  author = {Weijie Li and Jie Zhou and Zhe Ma and Zi Li and Yunliang Zhu and Handong Hu and Hao Ma and Cong Wang and Ping Zhang},
  title = {{Ab initio calculated dynamic structure factor and optical properties of beryllium along the Hugoniot}},
  year = {2023},
  eprint = {2303.16546},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2303.16546},
}
Figure