A wideband satcom based avionics network with CDMA uplink and TDM downlink

Dakshi Agrawal, Bartley C. Johnson, Upamanyu Madhow, Kannan Ramchandran, K. S. Chun18th 2000 · DOI

Abstract

This paper describes the technical foundations for a future satellite-based digital communication network tailored for avionics. Key features include packetized transmission for multimedia efficiency, a power-efficient TDM downlink utilizing turbo-coded nonlinear modulation, and a CDMA uplink with adaptive interference suppression to mitigate the near-far problem. Additionally, we introduce multiple description image encoding at the transport layer to enhance end-to-end performance resilience.

Introduction

As aviation transitions toward data-intensive operations involving voice, telemetry, and high-resolution video, existing communication infrastructures face significant limitations. Satellite communication (Satcom) offers global coverage but is hindered by power constraints on the downlink, the near-far problem on the uplink due to large propagation delays, and the fragility of hierarchical data packets. This research proposes a hybrid architecture to address these challenges.

To maximize power efficiency, satellite amplifiers must operate in the nonlinear saturation region. Traditional linear modulation schemes suffer significant degradation in this regime. Our design employs Continuous Phase Modulation (CPM), a constant-envelope signaling method that is inherently compatible with nonlinear amplification.

To achieve high reliability, we implement Bit Interleaved Coded Modulation (BICM) to pair CPM with powerful Turbo codes. This approach treats the complex M-ary CPM channel as a set of parallel binary channels, allowing the use of standard binary turbo decoding techniques.

Block diagram of the proposed Turbo-coded CPM system architecture.

The aircraft-to-satellite link utilizes Direct Sequence Code Division Multiple Access (DS-CDMA). A primary challenge in this asynchronous environment is the 'near-far' problem, where signals from closer aircraft overwhelm those from more distant ones. Traditional closed-loop power control is ineffective due to the high round-trip latency of satellite links.

We propose a Differential Minimum Mean Squared Error (DMMSE) algorithm for blind adaptive interference suppression. This receiver-side technique allows the satellite to distinguish between users and cancel out interference mathematically, eliminating the need for rapid power control feedback loops.

Data Transport and Source Coding

Modern image compression (e.g., JPEG-2000) is often highly sensitive to packet loss. We propose a Multiple Description (MD) coding framework using Reed-Solomon erasure codes. By creating multiple 'descriptions' of equal importance, the system ensures that image quality scales with the number of packets received, rather than failing completely if a specific 'important' packet is lost.

Performance Evaluation

The proposed frameworks were validated through computer simulations using various signaling models, including CPFSK and 3RC CPM.

Signaling parameters (modulation index h) for the CPFSK and 3RC CPM models used in simulations.

Key results include:

  • Downlink Performance: Turbo-coded CPM (M=4) achieved a $10^{-5}$ Bit Error Rate (BER) with only a 1.6 dB SNR penalty compared to QPSK, a trade-off justified by the significant gains in amplifier power efficiency.
  • Uplink Resilience: The DMMSE receiver maintained robust performance even when interferers were 20 dB stronger than the target signal. The system reached the 10% uncoded BER threshold (required for effective turbo decoding) at an $E_b/N_0$ of less than 5 dB.

Conclusion

By embracing the nonlinearities of satellite hardware and shifting interference management to the receiver, this hybrid CDMA/TDM architecture provides a robust path forward for avionics satcom. Future work will focus on refining frequency acquisition in high-Doppler environments and further optimizing joint source-channel coding strategies.

Summary updated

Abstract

The purpose of this paper is to describe some key technical ideas behind our vision of a future satcom based digital communication network for avionics applications The key features of our design are as follows: (a) Packetized transmission to permit efficient use of system resources for multimedia traffic; (b) A time division multiplexed (TDM) satellite downlink whose physical layer is designed to operate the satellite link at maximum power efficiency. We show how powerful turbo codes (invented originally for linear modulation) can be used with nonlinear constant envelope modulation, thus permitting the satellite amplifier to operate in a power efficient nonlinear regime; (c) A code division multiple access (CDMA) satellite uplink, which permits efficient access to the satellite from multiple asynchronous users. Closed loop power control is difficult for bursty packetized traffic, especially given the large round trip delay to the satellite. We show how adaptive interference suppression techniques can be used to deal with the ensuing near-far problem; (d) Joint source-channel coding techniques are required both at the physical and the data transport layer to optimize the end-to-end performance. We describe a novel approach to multiple description image encoding at the data transport layer in this paper.
BibTeX
@inproceedings{agrawal2000wideband,
  author = {Dakshi Agrawal and Bartley C. Johnson and Upamanyu Madhow and Kannan Ramchandran and K. S. Chun},
  title = {{A wideband satcom based avionics network with CDMA uplink and TDM downlink}},
  booktitle = {18th},
  year = {2000},
  doi = {10.2514/6.2000-1212},
}
Figure