A Wheel-rotor Hybrid Robot for Wildlife Investigation in a Natural Reserve

Xinyu Zhang, Li Wang, Erhu Gao, Lei Yang, Rong Fu, Huaping Liu, Jun LiResearch Square 2022 · DOI

Introduction

Maintaining ecological balance and biodiversity in human-impacted ecosystems requires accurate data on wildlife population development and distribution. However, traditional investigation methods often fall short. In vast natural reserves spanning thousands of square kilometers, researchers frequently rely on manual line transects. This process is not only inefficient and labor-intensive but also poses significant risks to investigators navigating dangerous terrains like scree beaches, swamps, and cliffs. Furthermore, human presence can disturb animal behavior, leading to inaccurate data.

While existing technologies like stationary camera traps and unmanned aerial vehicles (UAVs) offer some solutions, they come with inherent trade-offs. Camera traps have limited spatial coverage, while traditional drones suffer from short battery lives that preclude long-term monitoring. To address these challenges, researchers have developed a wheel-rotor hybrid robot designed to combine the endurance of a ground vehicle with the obstacle-clearing agility of a hexacopter.

System Architecture and Design

The proposed robot is an "amphibious" platform weighing approximately 48.5 kg, designed to adapt to the complex terrains of natural reserves. Its architecture integrates two distinct propulsion systems:

  1. Flight System: A six-axis rotor mechanism powered by U13 brushless motors and 34-inch carbon fiber paddles. This system provides the lift necessary to carry heavy sensor payloads and navigate impassable vertical or water-based obstacles.
  2. Ground System: A four-wheel drive (4WD) platform equipped with oil-pressure shock absorbers. This allows the robot to traverse rough land terrain efficiently and handle the impact of landings.
The wheel-rotor hybrid robot and its core components, designed for multi-terrain wildlife monitoring.

The robot's "intelligence" is powered by an onboard NVIDIA Jetson Xavier NX for high-level tasks such as obstacle avoidance and path planning, while a Pixhawk controller manages low-level flight and ground dynamics. Its perception suite includes a 32-beam LiDAR for 3D mapping and a dual-sensor photoelectric pod featuring a 30x optical zoom RGB camera and a long-wave uncooled infrared camera.

Field Validation in the Helan Mountains

The system's capabilities were validated through a field study in the Helan Mountains of Ningxia, China. The researchers focused on observing Pseudois nayaur (blue sheep), a species known for its ability to camouflage against rocky backgrounds.

The hybrid design proved critical for navigating the diverse environments of the reserve, including scree beaches, cliffs, and reedbeds. A key operational strategy—using wheels for the majority of the mission and switching to flight mode only to "leap" over obstacles—resulted in a ground endurance of approximately two hours, a significant improvement over the 20-minute limit of pure flight mode.

Key Results

  • Mobility: The robot achieved ground speeds of up to 3 m/s and flight speeds of 15 m/s, operating at altitudes up to 1,500 meters.
  • Obstacle Negotiation: In a practical "passage experiment," the robot encountered a flooded road. It successfully transitioned to flight mode, crossed the 4-meter water hazard, and resumed its ground mission on the other side.
  • Detection Capabilities: While blue sheep were often invisible to RGB cameras due to their camouflage, the integrated infrared sensor easily detected their heat signatures, even through dense vegetation.
  • Non-Invasive Monitoring: By utilizing high-power optical zoom from several hundred meters away, the robot observed natural foraging behaviors without disturbing the animals.

Conclusion and Future Directions

The wheel-rotor hybrid robot represents a significant advancement in wildlife monitoring technology. By bridging the gap between the endurance of rovers and the agility of drones, it provides a safer, more efficient, and less invasive means of surveying vast natural reserves.

Current limitations include a maximum 2-hour battery life and a reliance on remote manual control. Future work will focus on increasing the system's autonomy, specifically through AI-driven automatic identification, classification, and autonomous tracking of wildlife to further reduce the burden on human investigators.

Summary updated

Abstract

<title>Abstract</title> Knowing the population development and distribution patterns of wildlife resources is key to maintaining natural ecological balance and biodiversity in human-impacted ecosystems, which needs regular investigations. However, most investigations are performed artificially in vast natural reserves covering thousands of square kilometers, which is inefficient and inaccurate, especially in dangerous or inaccessible terrains. Here, we propose a wheel-rotor hybrid robot for wildlife investigations as an aid to assist investigators. In combination with wheels and rotors, the robot achieves land and flight amphibious abilities to adapt to complex terrains. The land mode enables the robot to operate for long periods and get close to targets, while the flight mode allows it to cross impassable terrains. The robot is equipped with multiple sensors, improving the investigation’s efficiency. A field test in Helan Mountain of China verifies the robot’s capability, showing excellent performance beyond traditional investigation and representing an advance for prolonged wildlife monitoring.
BibTeX
@inproceedings{zhang2022wheel,
  author = {Xinyu Zhang and Li Wang and Erhu Gao and Lei Yang and Rong Fu and Huaping Liu and Jun Li},
  title = {{A Wheel-rotor Hybrid Robot for Wildlife Investigation in a Natural Reserve}},
  booktitle = {Research Square},
  year = {2022},
  doi = {10.21203/rs.3.rs-2315938/v1},
}
Figure