A wearable adaptive penile rigidity monitoring system for assessment of erectile dysfunction

Xiangyang Wang, Ruojiang Wang, Yuyang Zhang, You Wu, Xu Wu, Zihao Luo, Yu Chang, Xiansheng Zhang, Tingrui PanMicrosystems 2024 · DOI

This research paper, published in Microsystems & Nanoengineering, introduces a significant leap in urological diagnostics: a wearable, passive system for monitoring erectile dysfunction (ED) that matches clinical standards without the bulky, sleep-disrupting hardware of the past.

TL;DR

Researchers have developed the WARM (Wearable Adaptive Rigidity Monitoring) system, a Bluetooth-enabled device that uses a novel dual-ring elastic sensor to measure penile tumescence and rigidity. By replacing motorized mechanical loads with passive differential elasticity, the system achieves clinical-grade accuracy ($R^2 > 0.98$) while significantly reducing interference with the patient's natural sleep and erection cycles.

What Problem Does This Paper Address?

The clinical "gold standard" for diagnosing ED is the Nocturnal Penile Tumescence and Rigidity (NPTR) test. This test distinguishes between organic ED (physical issues) and psychological ED by monitoring spontaneous erections during REM sleep.

However, the current industry standard, the RigiScan, is problematic. It relies on a bulky torque motor that periodically "tugs" on the penis to measure resistance. This active mechanical loading is noisy, uncomfortable, and—ironically—can wake the patient or inhibit the very erections it is trying to measure. Consequently, these tests are often confined to hospitals, leading to high costs and poor patient compliance. The WARM system aims to move this diagnostic capability from the clinic to the home.

Methods

The core innovation of the WARM system is the differential elastic measuring principle. Instead of using a motor to apply force, the system uses two distinct sensing rings:

  1. Reference Ring: Features a low elastic modulus. It stretches easily, allowing it to track changes in penile circumference (tumescence) without exerting significant pressure.
  2. Measuring Ring: Features a high elastic modulus. It resists expansion, allowing the system to calculate the force exerted by the erection (rigidity) based on Hooke’s Law.

The Sensor Architecture: The rings utilize a 7-layer parallel-plate capacitive strain sensor. The researchers used highly elastic polymers (Ecoflex and Dragon Skin silicone) as dielectrics and ionic gels or silver paste for the conductive layers. Crucially, the outer layers act as a Faraday shield to prevent electromagnetic interference from the environment.

The Hardware: The sensors connect to a flexible printed circuit (FPC) containing a microcontroller (STM32), a high-precision capacitance-to-digital converter, and a Bluetooth module for real-time data transmission to a smartphone or computer.

Datasets

The authors validated the system through three primary avenues:

  • Benchtop Simulation: An expandable penile model controlled by a high-precision flow controller was used to simulate internal pressures from 0 to 60 mmHg.
  • Clinical Comparison: The WARM system was benchmarked directly against the RigiScan device.
  • Human Volunteers: Two healthy 27-year-old male volunteers participated in Audio-Visual Sexual Stimulation (AVSS) tests and multi-night NPTR sleep studies.
  • Sleep Correlation: A Fitbit was used concurrently to track sleep stages (Deep, Light, REM) to ensure the device did not disrupt the sleep architecture.

Key Insights and Ideas

  • Passive is Better than Active: The "aha moment" is realizing that you don't need a motor to measure rigidity. By knowing the material properties (elastic modulus) of the rings, the system can derive rigidity purely from the displacement (strain) measured via capacitance.
  • Decoupling Tumescence and Rigidity: By using two rings with different moduli, the system can solve for two variables (size and hardness) simultaneously without one measurement confounding the other.
  • Adaptive Loading: Unlike the RigiScan, which applies a constant, harsh force, the WARM system’s load is "adaptive"—it only increases as the erection expands, making it much more "invisible" to the wearer during the flaccid state.
  • REM Synchronization: The study confirmed a tight correlation between REM sleep stages and erection events, proving the WARM system provides the high-fidelity data required for clinical diagnosis.

Key Results

  • High Accuracy: The system showed a correlation coefficient of $R^2 > 0.98$ when compared to the RigiScan standard.
  • Precision: It achieved a spatial resolution of 0.1% and maintained electrical stability over 1,000 stretch cycles.
  • Reduced Interference: The maximum tensile force exerted by the WARM system (approx. 2.5 N) is lower than the RigiScan (2.78 N), and because it is passive, it lacks the jarring "step-function" pull of a motor.
  • Sleep Integrity: Data from the Fitbit showed no significant change in sleep stage proportions (REM, Deep, Light) when wearing the WARM system compared to baseline nights.

Limitations and Future Work

While promising, the study has a few limitations:

  • Sample Size: The human validation was limited to two healthy volunteers. Larger clinical trials involving patients with confirmed organic and psychological ED are necessary.
  • Long-term Durability: While the sensors survived 1,000 cycles, real-world use involves sweat, movement, and repeated cleaning, which requires further "ruggedization" testing.
  • Diagnostic Automation: The authors suggest that future iterations could include AI-driven algorithms to automatically classify ED types based on the collected data, further reducing the burden on clinicians.

Summary updated

Abstract

Erectile dysfunction (ED) is a prevalent type of sexual dysfunction, and continuous monitoring of penile tumescence and rigidity during spontaneous nocturnal erections is crucial for its diagnosis and classification. However, the current clinical standard device, limited by its active mechanical load, is bulky and nonwearable and strongly interferes with erections, which compromises both monitoring reliability and patient compliance. Here, we report a wearable adaptive rigidity monitoring (WARM) system that employs a measurement principle without active loads, allowing for the assessment of penile tumescence and rigidity through a specifically designed elastic dual-ring sensor. The dual-ring sensor, comprising two strain-sensing rings with distinct elastic moduli, provides high resolution (0.1%), robust mechanical and electrical stability (sustaining over 1000 cycles), and strong interference resistance. An integrated flexible printed circuit (FPC) collects and processes sensing signals, which are then transmitted to the host computer via Bluetooth for ED assessment. Additionally, we validated the WARM system against the clinical standard device using both a penile model and healthy volunteers, achieving high consistency. Furthermore, the system facilitates the continuous evaluation of penile erections during nocturnal tumescence tests with concurrent sleep monitoring, demonstrating its ability to minimize interference with nocturnal erections. In conclusion, the WARM system offers a fully integrated, wearable solution for continuous, precise, and patient-friendly measurement of penile tumescence and rigidity, potentially providing more reliable and accessible outcomes than existing technologies. Erectile dysfunction (ED) is a prevalent sexual dysfunction, and continuous monitoring of penile tumescence and rigidity during spontaneous nocturnal erections is crucial for its diagnosis and classification. However, the current clinical standard device, limited by its active mechanical load, is bulky, nonwearable, and creates pronounced interference with erections, which compromises both monitoring reliability and patient compliance. Here, we report a wearable adaptive rigidity monitoring (WARM) system (Fig. 1a) that employs a measurement principle without active loads (Fig. 1b), allowing for the assessment of penile tumescence and rigidity through a specifically designed elastic dual-ring sensor. The dual-ring sensor, comprising two strain-sensing rings with distinct elastic moduli, provides high resolution (0.1%), robust mechanical and electrical stability (sustaining over 1000 cycles), and strong interference resistance. Additionally, we validate the WARM system against the clinical standard device using both a penile model and healthy volunteers, achieving high consistency. Furthermore, the system facilitates the continuous evaluation of penile erections during nocturnal tumescence tests, with concurrent sleep monitoring, demonstrating its ability to minimize interference with nocturnal erections (Fig. 1c). In conclusion, the WARM system offers a fully integrated, wearable solution for continuous, precise, and patient-friendly measurement of penile tumescence and rigidity, potentially providing more reliable and accessible outcomes than those from existing technologies.
BibTeX
@inproceedings{wang2024wearable,
  author = {Xiangyang Wang and Ruojiang Wang and Yuyang Zhang and You Wu and Xu Wu and Zihao Luo and Yu Chang and Xiansheng Zhang and Tingrui Pan},
  title = {{A wearable adaptive penile rigidity monitoring system for assessment of erectile dysfunction}},
  booktitle = {Microsystems},
  year = {2024},
  doi = {10.1038/s41378-024-00721-5},
}
Figure