A User-Oriented Local Coastal Flooding Early Warning System Using Metamodelling Techniques

Déborah Idier, Axel Aurouet, François Bachoc, Audrey Baills, José Betancourt, Fabrice Gamboa, Thierry Klein, Andrés F. López-Lopera, Rodrigo Pedreros, Jérémy Rohmer, Alexandre ThibaultJournal of Marine Science and Engineering 2021 · DOI

TL;DR

This paper presents a user-centric early warning system (FEWS) for local coastal flooding that overcomes the computational burden of traditional numerical models by employing metamodels. By integrating user needs, advanced modeling, and machine learning, the system provides rapid and relevant flood information, demonstrating its effectiveness and potential for broader application.

What Problem Does This Paper Address?

Coastal flooding is a growing threat, exacerbated by climate change. While sophisticated numerical models can accurately simulate these events, they are computationally intensive, taking hours to run. This makes them impractical for real-time forecasting and early warning systems (FEWSs). Furthermore, the raw output from these models often doesn't directly translate into actionable information for decision-makers. This gap between model capabilities and user needs is a significant challenge for effective flood risk management. The authors aim to bridge this gap by developing a fast, robust, and user-oriented FEWS.

Methods

The core of the proposed solution lies in metamodels, which are essentially surrogate models that learn to approximate the behavior of complex numerical models. The authors employ a two-pronged metamodeling approach:

  • Gaussian Processes (GPs): Used for predicting continuous outputs. GPs are favored for their ability to provide uncertainty estimates and their flexibility in modeling complex relationships.
  • Random Forests (RFs): Used for classification tasks, specifically to improve the prediction of zero flood events, which GPs can struggle with.

The process involves:

  1. Defining User Needs and Indicators: Working with local stakeholders to identify crucial information (e.g., flood intensity, human risk, road accessibility) and translating these into 14 specific indicators.
  2. Numerical Model Simulation: Using the phase-resolving SWASH model to generate a comprehensive dataset of coastal flooding scenarios. This model is chosen for its ability to accurately simulate wave overtopping, a key process in the study area.
  3. Metamodel Training: Training GP and RF metamodels on the data generated by SWASH.
  4. Post-processing and Combination Rules: Developing logical rules to combine the outputs of different metamodels and translate them into the final user-relevant indicators. This includes hierarchical constraints and physically logical relationships between indicators.
  5. FEWS Deployment: Integrating the metamodels and post-processing logic into a web-based interface for local users.

Datasets

  • Hindcast Data: A combination of historical hydro-meteorological data (1900-2016) and simulated extreme events were used to construct the input space for the metamodels.
  • Numerical Model Outputs: The SWASH model was used to generate a learning dataset for training the metamodels. This dataset included scenarios derived from the hindcast data and additional extreme event simulations.
  • Damage Event Database: Used for optimizing calibration parameters and validating the system against historical flood events.
  • Local User Feedback: Collected through workshops and during the operational use of the FEWS prototype.

Key Insights and Ideas

  • Metamodels as a Practical Solution: The paper strongly advocates for metamodels as a viable and efficient way to overcome the computational limitations of high-fidelity numerical models for real-time forecasting.
  • User-Centric Design is Crucial: The success of the FEWS hinges on a deep understanding of user needs, translating them into meaningful indicators, and presenting information in an accessible format.
  • Combining Models for Robustness: The authors demonstrate the benefit of combining different modeling techniques (GPs for regression, RFs for classification) to address specific weaknesses and improve overall prediction quality, especially for near-zero flood events.
  • Post-processing Bridges the Gap: The development of logical rules to combine metamodel outputs and incorporate physical constraints is key to generating actionable flood information.
  • Validation is Multi-faceted: The FEWS was validated not only against numerical model outputs but also against historical data and, importantly, through feedback from actual end-users.

Key Results

  • Speedup: The metamodel-based FEWS can provide flood information within minutes, a dramatic improvement over the hours required by the numerical model.
  • Prediction Quality:
    • GP metamodels for scalar inputs (Y1-Y6) showed high predictive capabilities with R² values above 95%.
  • The RF classifier for Y1 achieved an accuracy of 92%.
  • Metamodels for functional inputs (Y7-Y17) also demonstrated satisfactory prediction quality with high Q² values.
  • The spatial GP model for Y18 showed good agreement with numerical results, capturing flood categories effectively.
  • Operational Performance: The FEWS prototype was deployed and used by local stakeholders, who found it easy to use and understand. During a validation period (September 2019 to March 2021), the FEWS issued warnings that were in fair agreement with town hall information and photographic evidence of minor flooding.
  • False Alarms: The system demonstrated a good ability to minimize false alarms, with only a few instances of "close to flood" warnings and no actual flood alarms during the validation period, aligning with the observed conditions.

Limitations and Future Work

  • Metamodel Limitations: The authors acknowledge that GP metamodels can struggle with predicting values close to zero. While their approach of combining GPs with classifiers helps, they suggest further improvements could come from using metamodels specifically designed for positive functions or increasing the number of learning scenarios with zero flood events.
  • Topo-bathymetry Changes: The FEWS is dependent on the accuracy of the digital elevation model (DEM). Significant changes in topography or coastal defenses would necessitate re-running the entire modeling and metamodeling process.
  • Future Work:
    • Developing metamodeling techniques that can directly incorporate topo-bathymetry as a spatial input variable to make the system more adaptable to changing coastal environments.
  • Exploring more advanced metamodel refinements (e.g., truncated GP models, constrained GP models) and alternative machine learning approaches.
  • Investigating the use of citizen science data to further validate and improve FEWS predictions.
  • Adapting the methodology to other coastal flooding sites, considering their unique characteristics and data availability.

Summary updated

Abstract

Given recent scientific advances, coastal flooding events can be properly modelled. Nevertheless, such models are computationally expensive (requiring many hours), which prevents their use for forecasting and warning. In addition, there is a gap between the model outputs and information actually needed by decision makers. The present work aims to develop and test a method capable of forecasting coastal flood information adapted to users’ needs. The method must be robust and fast and must integrate the complexity of coastal flood processes. The explored solution relies on metamodels, i.e., mathematical functions that precisely and efficiently (within minutes) estimate the results that would provide the numerical model. While the principle of relying on metamodel solutions is not new, the originality of the present work is to tackle and validate the entire process from the identification of user needs to the establishment and validation of the rapid forecast and early warning system (FEWS) while relying on numerical modelling, metamodelling, the development of indicators, and information technologies. The development and validation are performed at the study site of Gâvres (France). This site is subject to wave overtopping, so the numerical phase-resolving SWASH model is used to build the learning dataset required for the metamodel setup. Gaussian process- and random forest classifier-based metamodels are used and post-processed to estimate 14 indicators of interest for FEWS users. These metamodelling and post-processing schemes are implemented in an FEWS prototype, which is employed by local users and exhibits good warning skills during the validation period. Based on this experience, we provide recommendations for the improvement and/or application of this methodology and individual steps to other sites.
BibTeX
@article{idier2021user,
  author = {Déborah Idier and Axel Aurouet and François Bachoc and Audrey Baills and José Betancourt and Fabrice Gamboa and Thierry Klein and Andrés F. López-Lopera and Rodrigo Pedreros and Jérémy Rohmer and Alexandre Thibault},
  title = {{A User-Oriented Local Coastal Flooding Early Warning System Using Metamodelling Techniques}},
  journal = {Journal of Marine Science and Engineering},
  year = {2021},
  doi = {10.3390/jmse9111191},
}
Figure