A Universal Length-Dependent Vibrational Mode in Graphene Nanoribbons

Jan Overbeck, Gabriela Borin Barin, Colin Daniels, Mickael L. Perrin, Oliver Braun, Qiang Sun, Rimah Darawish, Marta De Luca, Xiaoye Wang, Tim Dumslaff, Akimitsu Narita, Kläus Müllen, Pascal Ruffieux, Vincent Meunier, Román Fasel, Michel CalameACS 2019 · DOI

TL;DR

Researchers have discovered a new low-energy vibrational mode in graphene nanoribbons (GNRs) that is highly sensitive to their length. This discovery offers a powerful, non-destructive Raman spectroscopy tool for characterizing GNRs, crucial for their integration into future electronic devices, and also reveals insights into their structural integrity and substrate interactions.

What Problem Does This Paper Address?

Graphene nanoribbons (GNRs) are exciting materials for next-generation electronics due to their tunable electronic properties. However, precisely controlling and characterizing their length is a significant challenge. Current methods like low-temperature scanning tunneling microscopy (LT-STM) are time-consuming, expensive, and not practical for routine device characterization. This limits our ability to understand how GNR length affects their performance and to ensure their structural integrity during device fabrication. The paper aims to address this by finding a more accessible and efficient method to probe GNR length.

Methods

The study employs a multi-pronged approach:

  • Raman Spectroscopy: This is the primary experimental technique used to detect and analyze the vibrational modes of GNRs. They used various excitation wavelengths (488 nm, 532 nm, and 785 nm) to optimize signal detection for different GNR types.
  • Scanning Tunneling Microscopy (STM): Both room-temperature STM (RT-STM) and low-temperature STM (LT-STM) were used to visualize the GNRs, determine their lengths, and assess their structural integrity and alignment on the substrate.
  • First-Principles Calculations (DFT): Density Functional Theory was used to model the vibrational properties of GNRs and to identify the nature of the observed vibrational modes.
  • REBOII Force-Field and Bond Polarizability Model: For larger GNR systems, a combination of these models was used to calculate Raman intensities, complementing DFT for computationally intensive systems.
  • Polarization-Dependent Raman Spectroscopy: This technique was used to probe the symmetry and orientation of the vibrational modes, providing further insights into the GNR structure and alignment.

Datasets

Not discussed in the paper.

Key Insights and Ideas

  • A Universal Length-Dependent Mode: The discovery of a low-energy vibrational mode, termed the Longitudinal Compressive Mode (LCM), that consistently appears across different families of armchair graphene nanoribbons (AGNRs) and whose frequency directly correlates with GNR length. This is a significant breakthrough as it provides a universal spectroscopic fingerprint for GNR length.
  • LCM as a Probe for Structural Integrity: The intensity of the LCM mode is highly sensitive to defects and damage in GNRs. This makes it an excellent tool for monitoring GNR quality during processing and fabrication.
  • Substrate Influence on GNR Vibrations: The LCM frequency is significantly affected by the substrate on which the GNRs are placed. This highlights the importance of substrate interactions in determining GNR properties and opens avenues for exploring hybrid device functionalities.
  • Bridging Theory and Experiment: The study demonstrates excellent agreement between experimental Raman spectra, STM observations, and theoretical calculations, validating the proposed LCM mode and its interpretation.

Key Results

  • A new low-energy vibrational mode (LCM) was identified in AGNRs, appearing at approximately 100 cm⁻¹.
  • The frequency of the LCM mode was found to decrease with increasing GNR length.
  • This length dependence was confirmed through a combination of Raman spectroscopy, STM, and theoretical calculations.
  • The LCM mode was observed in all studied families of AGNRs (5-, 7-, and 9-AGNRs), indicating its universality.
  • The intensity of the LCM mode was shown to be a sensitive indicator of GNR damage, decreasing significantly with laser irradiation.
  • A notable down-shift of the LCM frequency (around 4%) was observed when GNRs were transferred onto a graphene interlayer compared to an oxide substrate.

Limitations and Future Work

  • Substrate Modeling: The current theoretical calculations do not fully account for substrate interactions, which are shown to significantly influence the LCM frequency, especially for longer GNRs. Future work will focus on developing more accurate substrate models to better match experimental results and enable quantitative length distribution analysis solely from Raman spectra.
  • Spectral Resolution: The spectral resolution of the current setup limits the ability to fully discriminate between low-energy polarization-dependent background signals and potential additional Raman peaks.
  • GNR Length Distribution: While the LCM can indicate the presence of short GNRs, precisely extracting a quantitative length distribution from Raman spectra alone requires further refinement of the modeling approach, particularly incorporating substrate effects.
  • Other GNR Edge Structures: The study focused on armchair GNRs. Future work could investigate if this LCM mode is also present in GNRs with different edge structures (e.g., zigzag).
  • Hybrid Devices: The observed substrate dependence of the LCM suggests potential for exploring hybrid devices by leveraging GNR-substrate interactions. This is an area for future research.

Summary updated

Abstract

Graphene nanoribbons (GNRs) have attracted considerable interest, as their atomically tunable structure makes them promising candidates for future electronic devices. However, obtaining detailed information about the length of GNRs has been challenging and typically relies on low-temperature scanning tunneling microscopy. Such methods are ill-suited for practical device application and characterization. In contrast, Raman spectroscopy is a sensitive method for the characterization of GNRs, in particular for investigating their width and structure. Here, we report on a length-dependent, Raman-active low-energy vibrational mode that is present in atomically precise, bottom-up-synthesized armchair graphene nanoribbons (AGNRs). Our Raman study demonstrates that this mode is present in all families of AGNRs and provides information on their length. Our spectroscopic findings are corroborated by scanning tunneling microscopy images and supported by first-principles calculations that allow us to attribute this mode to a longitudinal acoustic phonon. Finally, we show that this mode is a sensitive probe for the overall structural integrity of the ribbons and their interaction with technologically relevant substrates.
BibTeX
@inproceedings{overbeck2019universal,
  author = {Jan Overbeck and Gabriela Borin Barin and Colin Daniels and Mickael L. Perrin and Oliver Braun and Qiang Sun and Rimah Darawish and Marta De Luca and Xiaoye Wang and Tim Dumslaff and Akimitsu Narita and Kläus Müllen and Pascal Ruffieux and Vincent Meunier and Román Fasel and Michel Calame},
  title = {{A Universal Length-Dependent Vibrational Mode in Graphene Nanoribbons}},
  booktitle = {ACS},
  year = {2019},
  doi = {10.1021/acsnano.9b05817},
}
Figure