A theoretical investigation of mixing thermodynamics, age-hardening potential and electronic structure of ternary M11–xM2xB2 alloys with AlB2 type structure

Björn Alling, Hans Högberg, Rickard Armiento, Johanna Rosén, Lars HultmanScientific 2015 · DOI

TL;DR

This paper explores the potential for creating stronger, age-hardenable ternary diboride alloys by computationally screening 45 different combinations. They identified Al₁-ₓTiₓB₂ as a promising candidate for age hardening due to its tendency for isostructural decomposition and minimal lattice mismatch, with the underlying electronic structure explaining these behaviors.

What Problem Does This Paper Address?

Transition metal diborides, like TiB₂, are highly sought-after for applications requiring extreme hardness and excellent electrical conductivity, such as protective coatings for tools and advanced electrical contacts. However, their industrial use is often limited by synthesis challenges and a lack of fine-tuning capabilities. The authors are inspired by the success of age hardening in similar ceramic systems (like Ti₁-ₓAlₓN) and aim to investigate if this phenomenon can be achieved in ternary diboride alloys. Specifically, they want to understand which combinations of diborides could exhibit age hardening through clustering or ordering, and how their electronic structures influence these properties.

Methods

The researchers employed first-principles calculations, specifically density functional theory (DFT) using the projector augmented-wave (PAW) method. They systematically calculated the mixing thermodynamics (enthalpy and free energy) for 45 ternary diboride alloys with the AlB₂ crystal structure. To model disordered alloys, they used special quasi-random structures (SQS) with varying numbers of atoms (72 and 192) to ensure accurate representation of mixing trends and quantitative results. They also investigated ordered alloy structures. To understand the underlying reasons for observed trends, they analyzed the electronic density of states (DOS) and symmetry-projected d-states of key alloys.

Datasets

Not discussed in the paper. The study relies on first-principles calculations rather than experimental datasets for training or evaluation.

Key Insights and Ideas

  • Age Hardening Potential in Diborides: The study reveals that age hardening, a phenomenon typically associated with precipitation hardening in metals, might be achievable in ceramic diboride alloys through isostructural clustering or spinodal decomposition.
  • Al₁-ₓTiₓB₂ as a Prime Candidate: Al₁-ₓTiₓB₂ stands out as a particularly promising alloy for age hardening due to a strong driving force for phase separation (clustering) combined with a small lattice mismatch and a high bulk modulus.
  • Electronic Structure Dictates Properties: The electronic structure, particularly the d-d interactions between transition metals in the simple hexagonal geometry, is identified as the key factor responsible for the pseudogap at the Fermi level in transition metal diborides like TiB₂, ZrB₂, and HfB₂.
  • Disruption of d-d Bonding: The addition of Al to TiB₂ disrupts the d-d bonding, weakening the electronic structure and leading to a large positive mixing enthalpy, which in turn drives the clustering and potential for age hardening.
  • Beyond Simple Lattice Mismatch: While lattice mismatch is a factor, the study highlights that even lattice-matched systems can exhibit clustering if there's a strong thermodynamic driving force, making them ideal for age hardening.

Key Results

  • Screening of 45 Alloys: The study screened 45 ternary diboride alloys (M¹₁-ₓM²ₓB₂) with the AlB₂ structure.
  • Clustering and Ordering Predictions: At 1000°C, 16 alloys were predicted to favor clustering, 7 to favor ordering, and the remaining 22 showed solid solution miscibility with tendencies for clustering or ordering at 0 K.
  • Al₁-ₓTiₓB₂ Properties: For Al₁-ₓTiₓB₂, mixing enthalpies showed a maximum of 0.125 eV/f.u. at x=0.375, indicating a significant driving force for phase separation. The lattice parameters (a and c) were found to be nearly independent of composition.
  • Pseudogap Origin: The pseudogap at the Fermi level in transition metal diborides is attributed to d-d interactions in the simple hexagonal geometry, enhanced by charge transfer and metal-boron bonding.

Limitations and Future Work

  • Experimental Validation Needed: While the theoretical predictions are strong, experimental validation of the identified age-hardening potential in alloys like Al₁-ₓTiₓB₂ is crucial.
  • Synthesis Challenges: The paper acknowledges that synthesizing these ternary diboride thin films using physical vapor deposition can be technologically challenging, a hurdle that needs to be overcome for practical applications.
  • Disorder-Induced Scattering: The authors note that while alloying with different valency transition metals might improve electrical conductivity, it needs to be balanced against potential disorder-induced scattering.
  • Future Directions: Future work could focus on exploring alloying strategies to optimize the electronic structure for specific applications, such as enhancing carrier concentration in electrical contacts, while carefully managing disorder. Further investigation into the precise mechanisms of spinodal decomposition and precipitate formation in these ternary systems would also be valuable.

Summary updated

Abstract

Transition metal diborides are ceramic materials with potential applications as hard protective thin films and electrical contact materials. We investigate the possibility to obtain age hardening through isostructural clustering, including spinodal decomposition, or ordering-induced precipitation in ternary diboride alloys. By means of first-principles mixing thermodynamics calculations, 45 ternary M(1)1-x M(2)xB2 alloys comprising M(i)B2 (M(i) = Mg, Al, Sc, Y, Ti, Zr, Hf, V, Nb, Ta) with AlB2 type structure are studied. In particular Al1-xTixB2 is found to be of interest for coherent isostructural decomposition with a strong driving force for phase separation, while having almost concentration independent a and c lattice parameters. The results are explained by revealing the nature of the electronic structure in these alloys, and in particular, the origin of the pseudogap at EF in TiB2, ZrB2, and HfB2.
BibTeX
@inproceedings{alling2015theoretical,
  author = {Björn Alling and Hans Högberg and Rickard Armiento and Johanna Rosén and Lars Hultman},
  title = {{A theoretical investigation of mixing thermodynamics, age-hardening potential and electronic structure of ternary M11–xM2xB2 alloys with AlB2 type structure}},
  booktitle = {Scientific},
  year = {2015},
  doi = {10.1038/srep09888},
}
Figure