A T-Type Capacitive Sensor Capable of Measuring5-DOF Error Motions of Precision Spindles

Kui Xiang, Wen Wang, Rongbo Qiu, Deqing Mei, Zichen Chen2017 · DOI

TL;DR

This paper introduces a novel T-type capacitive sensor designed for simultaneous, in-situ measurement of five degrees of freedom (5-DOF) error motions in precision spindles. By integrating sensing electrodes into both the cylindrical bore and the end face of the stator, this sensor offers a compact and effective solution for improving machine tool accuracy.

What Problem Does This Paper Address?

High-precision machine tools rely on spindles that rotate with extreme accuracy. However, manufacturing and assembly imperfections lead to spindle error motions, including linear translations (dx, dy, dz) and tilt motions (εx, εy), which degrade overall machine performance. Existing methods for measuring these 5-DOF error motions often involve bulky optical systems or multiple probe-type capacitive sensors that are difficult to align and sensitive to surface imperfections. This paper aims to address the need for a more integrated, compact, and robust sensor solution.

Methods

The core innovation is the "T-type capacitive sensor" (T-type CS) with an integrated structure. This design utilizes a rotor as the excitation electrode and a stator housing the sensing electrodes. The stator features two sets of sensing electrodes:

  • Radial Electrode Group (REG): Located in the cylindrical bore, these electrodes measure radial error motions (dx, dy). They employ a differential configuration to enhance linearity and reduce fringe effects.
  • End Part Electrode Group (EPEG): Situated on the end face, these electrodes measure axial (dz) and tilt (εx, εy) error motions.

The sensor design leverages flexible printed circuit board (FPCB) technology for fabricating the sensing electrodes, which helps minimize fringe effects and allows for integrated manufacturing. The paper details the mathematical models derived using conformal mapping and electrostatic field theory to relate capacitance changes to spindle displacements. Finite element simulations (using Maxwell 12) and experimental validation were conducted to verify the theoretical models and the sensor's performance.

Datasets

Not discussed in the paper. The paper focuses on theoretical modeling, simulation, and experimental validation using a custom-built sensor and test rig.

Key Insights and Ideas

  • Integrated 5-DOF Measurement: The T-type CS design ingeniously combines radial and axial/tilt sensing within a single, compact unit, eliminating the need for multiple sensors or complex alignment procedures.
  • FPCB for Fringe Effect Reduction: Utilizing FPCB for electrode fabrication significantly reduces parasitic capacitance due to fringe effects (by ~90%), leading to improved linearity and accuracy.
  • Differential Configuration: Employing differential measurement configurations for both REG and EPEG enhances linearity and improves the signal-to-noise ratio, making the sensor less sensitive to environmental factors and manufacturing tolerances.
  • Simplified Rotor Artifact: The sensor design allows for a simplified rotor artifact (a two-segment stepped shaft), making it easier to manufacture and integrate into existing spindle systems.
  • Near-Linear Output: The differential configuration results in a near-linear output response for rotor displacements, simplifying signal processing and calibration.

Key Results

  • Simulation and Experimental Agreement: Theoretical models, simulation results, and experimental data showed good agreement, validating the sensor's design and measurement principles.
  • Reduced Fringe Effects: The FPCB fabrication method reduced fringe effects by approximately 90%.
  • Improved Measurement Performance: The signal processing circuit and differential configuration increased measuring performance, achieving measured differential output capacitance up to 93% of theoretical values.
  • Accurate Error Motion Detection: Experimental results demonstrated that the T-type CS can accurately reflect radial displacements and tilt motions, with the differential output capacitance showing good consistency and stability. For instance, the measured yaw direction showed a relative error of only 1.3% compared to the preset angle.

Limitations and Future Work

  • Coupling Effects: While the paper analyzes coupling effects (e.g., tilt motion affecting radial measurements), further refinement of compensation strategies might be beneficial for extremely high-precision applications.
  • Systematic Errors: The paper acknowledges minor systematic errors arising from FPCB flexibility and manufacturing tolerances (e.g., slight coaxial deviation), which can be compensated for.
  • Future Work: The authors suggest that the developed sensor and signal processing circuit provide a solid foundation for future research and development, implying potential for further optimization, miniaturization, and integration into various machine tool platforms. The paper's success in demonstrating the feasibility of the T-type CS for 5-DOF measurement opens avenues for its practical implementation.

Summary updated

BibTeX
@misc{xiang2017t,
  author = {Kui Xiang and Wen Wang and Rongbo Qiu and Deqing Mei and Zichen Chen},
  title = {{A T-Type Capacitive Sensor Capable of Measuring5-DOF Error Motions of Precision Spindles}},
  year = {2017},
  doi = {10.3390/s17091975},
}
Figure