A Study on the Influence of Tire Speed and Pressure on Measurement Parameters Obtained from High-Speed Tire Uniformity Testing

Meng Du, Pengfei Sun, Shuiting Zhou, Hongwu Huang, Jie ZhuVehicles 2020 · DOI

TL;DR

This study investigates how tire speed and pressure affect key uniformity parameters measured by a high-speed uniformity testing machine. The findings reveal that higher speeds generally increase force fluctuations, while increased tire pressure can reduce lateral sway and improve stability, offering valuable insights for tire design and vehicle performance optimization.

What Problem Does This Paper Address?

Tire uniformity is crucial for vehicle handling, ride comfort, and component longevity. Traditional low-speed uniformity tests, while standard, may not accurately reflect the forces and moments experienced by tires at high speeds encountered in modern driving. This gap means that critical uniformity characteristics, particularly those related to dynamic forces like tangential and torque fluctuations, might be overlooked. The paper aims to bridge this gap by using a high-speed uniformity testing machine to comprehensively analyze how speed and pressure influence a wider range of uniformity parameters, providing a more accurate picture of tire performance under realistic driving conditions.

Methods

The researchers employed a high-speed uniformity testing machine to conduct experiments. This machine simulates road conditions by driving a tire against a rotating drum under controlled load, speed, and pressure. Key uniformity parameters, including radial force fluctuation (RFV), lateral force fluctuation (LFV), tangential force fluctuation (TFV), and various harmonic components, were measured. The study also established a mathematical model for the testing machine and detailed the signal acquisition and calculation methods for these parameters. Experimental data were then analyzed using regression analysis to understand the relationships between speed, pressure, and the measured uniformity parameters.

Datasets

The study utilized a single tire of size 205/55R16, with a test load of 4221 N (approximately 70% of its maximum load). The experiments were conducted across a range of speeds from 120 km/h to 240 km/h in 20 km/h increments, and at three different inflation pressures: 0.16 MPa, 0.20 MPa, and 0.24 MPa. No new datasets were introduced; rather, existing tire uniformity testing methodologies were applied to collect data under varied conditions.

Key Insights and Ideas

  • High-speed testing is essential: The high-speed uniformity test provides a more comprehensive understanding of tire behavior than low-speed tests, capturing parameters like tangential and torque fluctuations that are critical at higher velocities.
  • Speed amplifies forces: As vehicle speed increases, radial, lateral, and tangential force fluctuations tend to rise, contributing to increased vehicle vibration and potential instability.
  • Pressure is a key stabilizer: Increasing tire pressure generally reduces lateral force fluctuations and turning torque, leading to improved vehicle stability and a smoother ride, particularly in mitigating left-right swing.
  • Complex interactions: The relationship between speed and some parameters, like positive torque fluctuation, is not linear, showing an initial increase followed by a decrease, highlighting the nuanced dynamics at play.

Key Results

  • Speed Effects:
    • Radial Force Fluctuation (RFV) and its first harmonic (H1RFV) increased significantly with speed, from 213 N and 152.9 N at 120 km/h to 803 N and 553.4 N at 240 km/h, respectively.
  • Lateral Force Fluctuation (LFV) showed a less pronounced increase until speeds above 220 km/h, where it began to rise more sharply.
  • Tangential Force Fluctuation (TFV) exhibited an approximately linear increase with speed, rising from 208 N to 935 N between 120 km/h and 240 km/h.
  • Turning moment fluctuation (OTTV) also increased with speed.
  • Pressure Effects:
    • Radial Force Fluctuation (RFV) and Tangential Force Fluctuation (TFV) generally increased with higher tire pressure.
  • Lateral Force Fluctuation (LFV), positive torque fluctuation (SATV), and turning moment fluctuation (OTTV) decreased with increasing tire pressure. For instance, LFV decreased from approximately 65 N at 0.16 MPa to 52 N at 0.24 MPa.

Limitations and Future Work

The study acknowledges that the test was conducted on a single tire model (205/55R16) under specific load conditions. The authors suggest that these findings can guide tire designers in selecting optimal solutions and help tire testers establish more accurate testing conditions. Future work could involve testing a wider variety of tire types, sizes, and load conditions to further generalize these findings. Additionally, exploring the correlation between these uniformity parameters and actual vehicle dynamics in real-world driving scenarios would be a valuable next step.

Summary updated

Abstract

In order to improve the test conditions of the tire uniformity test and the effect of the speed and tire pressure on the uniformity parameters, the uniformity test of the tire under different speeds and tire pressure was carried out by a high-speed uniformity test machine, and the experimental data were analyzed and fitted by the regression analysis method. This paper introduces the definition of uniformity and the uniformity parameters of automotive tires; the working principle of a high-speed uniformity testing machine is briefly described, a mathematical model of the uniformity testing machine is established, and the signal acquisition process of the tire uniformity parameters and the calculation method of the uniformity parameters are described. The test result indicates: As the speed increases, the radial force fluctuation, lateral force fluctuation, tangential force fluctuation, and turning torque fluctuation of the tire increase, and the positive torque fluctuation first increases and then decreases; with the increase of tire pressure, the radial force fluctuation and the tangential force fluctuation of the tire increase, and the lateral force fluctuation, the turning torque fluctuation, and the returning moment fluctuation are all reduced. Compared to the low speed uniformity test, the high speed uniformity test can better reflect the uniformity of the tire, reducing the speed of the vehicle can reduce the radial runout and lateral sway of the tire; increasing the tire pressure can reduce the left and right swing of the vehicle.
BibTeX
@inproceedings{du2020study,
  author = {Meng Du and Pengfei Sun and Shuiting Zhou and Hongwu Huang and Jie Zhu},
  title = {{A Study on the Influence of Tire Speed and Pressure on Measurement Parameters Obtained from High-Speed Tire Uniformity Testing}},
  booktitle = {Vehicles},
  year = {2020},
  doi = {10.3390/vehicles2030031},
}
Figure