Abstract
Shipwaves can cause beach erosion, seawall destruction, and difficulty in cargo handling due to ship rolling. Recently, high-speed marine leisure craft have also posed threats to swimmers and fishers. This study investigates the propagation characteristics of shipwaves in shallow water through experimental and theoretical analysis. Findings indicate that shipwaves in shallow depths exhibit significant wave height increases, and wave propagation can be halted by opposing currents even at relatively low velocities in shallow water.
Introduction
As high-speed marine leisure craft and large commercial vessels become more common, the waves they generate—shipwaves—pose increasing risks to coastal infrastructure and safety. These waves contribute to beach erosion, damage seawalls, and create hazardous conditions for small fishing boats and port operations. While shipwaves in deep water are well-documented, their behavior transforms dramatically as they approach the shore. This research aims to bridge the gap in understanding how these waves amplify in "intermediate" and "shallow" water depths and how they interact with local currents.
Methodology
The study employed a dual-track approach involving experimental modeling and theoretical analysis.
Experimental Modeling
Tests were conducted in a 3D wave tank (28m x 6m x 1m) at the Korea Institute of Maritime and Fisheries Technology. Four distinct model ship types were used: an oil tanker, a container ship, a fishing boat, and a tug boat. Wave heights were measured at varying speeds and depths using wave gauges positioned at different lateral distances from the ship's centerline.
Theoretical Analysis
The behavior was categorized using the Depth Froude Number ($Fr_h$) and Length Froude Number ($Fr_L$). Wave energy conservation equations and linear wave theory were applied to predict wave height changes ($H/H_0$) relative to depth. Additionally, a mathematical model accounted for the influence of constant currents on wave celerity and height.
Key Findings and Results
The research yielded several critical insights into the dynamics of ship-generated waves:
- Shallow Water Amplification: Waves generated in deep water can increase to 1.45 times their original height upon reaching shallow water. If waves originate in intermediate depths, this amplification can reach up to 1.8 times.
- Froude Number Sensitivity: Wave height is highly sensitive to the Depth Froude Number ($Fr_h = v_s / \sqrt{gh}$). Near the critical speed ($Fr_h \approx 1.0$), wave height decreases rapidly with distance. At lower values (around 0.6), height remains more stable.
- Wave Angle Dynamics: The angle of the shipwave ($\alpha$) relative to the ship's path is nearly constant at approximately 35 degrees for low Froude numbers. However, this angle drops sharply as the Depth Froude Number exceeds 0.7.
- Current Blockage: A mathematical threshold was identified for wave propagation against a current. If an opposing current's speed exceeds 1/4 of the wave's deep-water celerity, the wave cannot propagate forward.
- Distance Decay: For all ship types, the non-dimensionalized wave height ($H_m/L_s$) decreases as the lateral distance from the ship's path ($S/L_s$) increases, with steeper decay rates at higher speeds.
Conclusion
The study confirms that wave energy conservation is a reliable predictor for coastal shipwave impact, as theoretical curves closely matched experimental data. While the current model assumes uniform currents and does not fully account for specific hull geometries, it provides a vital foundation for regulating vessel speeds in sensitive shallow-water zones. Future work should focus on integrating these findings into practical port design and coastal management safety standards.
Summary updated