A software-based procedure for robotic end effector error correction

Medhat Moussa, Martin Hill, James Fernandes, Fakhri KarrayIROS 1998 · OpenReview

Abstract

Presents a procedure for modeling and eliminating an end effector configuration error as a result of a faulty joint or a damaged link. This procedure provides an inexpensive software alternative to hardware replacement. A neural network model was developed and tested an a 6 DOF PUMA robot. The network approximates the error based on data obtained through observing the robot while executing a set of MOVE commands. The results show that, regardless of the error source, the robot's accuracy could be highly improved even when a small number of data points are used.
BibTeX
@inproceedings{moussa1998software,
  author = {Medhat Moussa and Martin Hill and James Fernandes and Fakhri Karray},
  title = {{A software-based procedure for robotic end effector error correction}},
  booktitle = {IEEE/RSJ International Conference on Intelligent Robots and Systems},
  year = {1998},
  url = {https://openreview.net/forum?id=Uo7zh3MvyFLf},
}

Loading related content...

Figure