A Single-Camera Method for Estimating Lift Asymmetry Angles Using Deep Learning Computer Vision Algorithms

Zhengyang Lou, Zitong Zhan, Huan Xu, Yin Li, Yu Hen Hu, Ming-Lun Lu, Dwight M. Werren, Robert G. RadwinIEEE Trans. Hum. Mach. Syst 2025 · OpenReview

Abstract

A computer vision (CV) method to automatically measure the revised NIOSH lifting equation asymmetry angle (A) from a single camera is described and tested. A laboratory study involving ten participants performing various lifts was used to estimate A in comparison to ground truth joint coordinates obtained using 3-D motion capture (MoCap). To address challenges, such as obstructed views and limitations in camera placement in real-world scenarios, the CV method utilized video-derived coordinates from a selected set of landmarks. A 2-D pose estimator (HR-Net) detected landmark coordinates in each video frame, and a 3-D algorithm (VideoPose3D) estimated the depth of each 2-D landmark by analyzing its trajectories. The mean absolute precision error for the CV method, compared to MoCap measurements using the same subset of landmarks for estimating A, was 6.25° (SD = 10.19°, N = 360). The mean absolute accuracy error of the CV method, compared against conventional MoCap landmark markers was 9.45° (SD = 14.01°, N = 360).
BibTeX
@article{lou2025single,
  author = {Zhengyang Lou and Zitong Zhan and Huan Xu and Yin Li and Yu Hen Hu and Ming-Lun Lu and Dwight M. Werren and Robert G. Radwin},
  title = {{A Single-Camera Method for Estimating Lift Asymmetry Angles Using Deep Learning Computer Vision Algorithms}},
  journal = {IEEE Trans. Hum. Mach. Syst.},
  year = {2025},
  url = {https://openreview.net/forum?id=mGcMByHpVC},
}

Loading related content...

Figure