A SIMPLE UNIDIRECTIONAL OPTICAL INVISIBILITY CLOAK MADE OF WATER

Bin Zheng, Lian Shen, Zuozhu Liu, Huaping Wang, Xianmin Zhang, Hongsheng ChenElectromagnetic 2014 · DOI

Abstract: Previous invisibility cloaks were based on metamaterials, which are difficult for practical realization in the visible light spectrum. Here we demonstrate a unidirectional invisibility cloak in the visible light spectrum. By using water as the effective material, separated into several regions by glass sheets, a simple and inexpensive invisible device is realized. This device can hide macroscopic objects on a large scale and is polarization-insensitive. Owing to its simple fabrication and easily acquired materials, our work can be widely applied in daily life.

Introduction

For over a decade, invisibility cloaking has transitioned from science fiction to a rigorous field of study, primarily through "transformation optics." However, most early designs relied on metamaterials: engineered structures with sub-wavelength features that are incredibly difficult to fabricate for visible light. These materials often require complex nanofabrication, are expensive, and typically only work at microscopic scales or within narrow frequency bands.

The challenge addressed here is one of practicality and scale. This research presents a "simplest and cheapest" cloak that works for human vision (the visible spectrum), is insensitive to light polarization, and is large enough to hide everyday macroscopic objects.

Design and Methodology

Moving away from the complex tensor mathematics of transformation optics, this design utilizes geometric ray optics and basic refraction principles.

Geometric design of the water-based invisibility cloak showing ray paths through different refractive regions.
  • The Design: The cloak consists of a specific arrangement of triangular regions. "Region 1" and "Region 2" are containers filled with pure water ($n_1 = 1.333$), while "Region 3" (the cloaking area) and the surrounding environment are air ($n_0 = 1$).
  • The Physics: The device relies on Snell’s Law. When parallel light rays hit the glass-water interface at a specific angle (calculated as $\alpha = 33.3^\circ$), they refract. The geometry is precisely calculated so that the rays bend around the central air-filled region (Region 3) and then refract again upon exiting, returning to their original parallel paths.
  • Construction: The regions are separated by thin, transparent glass sheets. The prototype stands 10 cm high, using water as the primary refractive medium due to its stable optical properties and ease of acquisition.

Experimental Results

The team successfully demonstrated the cloaking of a 14 cm tall giraffe toy placed inside the 10 cm tall device.

Experimental demonstration: (a) background only, (b) object (giraffe) in place, (c) object hidden by the water cloak.

As shown in the experimental photographs, the background (a forest scene) remains continuous and undistorted behind the cloak, while the body of the object inside disappears. The device proved to be polarization-insensitive, meaning it works for randomly polarized natural light, unlike many metamaterial-based alternatives.

Numerical simulations and physical tests also highlighted the importance of observer distance. The cloak is designed for "parallel rays," which effectively means an observer at infinity. At a distance of 500 cm, the light rays approximate parallel lines well enough for high performance, whereas at 50 cm, significant background discontinuity occurs due to the divergence of the rays.

Key Insights

  • Abandoning Phase Preservation: Traditional transformation optics cloaks attempt to ensure light waves exit with the exact same phase they had entering, necessitating metamaterials. By acknowledging that the human eye is phase-insensitive, the problem was simplified to a ray optics challenge solvable with natural materials.
  • The Fluid Advantage: Using water provides a "fluidic" advantage over solid crystals. Water is easily shaped by its container, allowing for easier scaling and lower fabrication hurdles.
  • Temperature Stability: Water's refractive index is remarkably robust. Even with temperature swings from 10°C to 90°C, the refractive index only changes by about 1%, ensuring the cloaking effect remains stable under various environmental conditions.

Limitations and Future Outlook

While effective, the device is currently unidirectional, meaning the illusion only holds when viewed from a specific front-on angle. Additionally, small "seams" or lines are visible in the center of the image, caused by the gaps where the glass sheets are glued together; precision manufacturing could likely eliminate these artifacts.

A notable limitation in the prototype was the "head problem": the giraffe's head remained visible because it extended above the 10 cm height of the water containers. This underscores that the object must be entirely contained within the geometric "shadow" of the water prisms. Because the materials are inexpensive, this design is a prime candidate for mass production and could be scaled up significantly for larger macroscopic applications.

Summary updated

Abstract

Previous invisibility cloaks were based on metamaterials, which are difficult for practical realization in visible light spectrum. Here we demonstrate a unidirectional invisibility cloak in visible light spectrum. By using water as the effective material and separated into several regions by glass sheets, a simplest and cheapest invisible device is realized. This device can hide macroscopic objects with large scale and is polarization insensitive. Owing to simple fabrication and easily acquisitive materials, our work can be widely applied in our daily life.
BibTeX
@inproceedings{zheng2014simple,
  author = {Bin Zheng and Lian Shen and Zuozhu Liu and Huaping Wang and Xianmin Zhang and Hongsheng Chen},
  title = {{A SIMPLE UNIDIRECTIONAL OPTICAL INVISIBILITY CLOAK MADE OF WATER}},
  booktitle = {Electromagnetic},
  year = {2014},
  doi = {10.2528/pier14030805},
}
Figure