A simple strategy based on upconversion nanoparticles for a fluorescent resonant energy transfer biosensor

Hao Zhu, Yu‐Jie Ding, Anqi Wang, Xu Sun, Xingcai Wu, Jun‐Jie ZhuJournal of Materials Chemistry B 2014 · DOI

TL;DR

This paper presents a novel and simplified biosensor for detecting lysozyme and DNA. It utilizes upconversion nanoparticles (UCNPs) as fluorescent donors and a dye-labeled aptamer as an acceptor, employing a cationic polymer to bring them into close proximity for efficient FRET quenching. The FRET signal is restored upon target binding, offering a sensitive and selective detection method without complex bioconjugation steps.

What Problem Does This Paper Address?

Detecting specific biomolecules like lysozyme and DNA in complex biological samples is crucial for diagnostics and research. Traditional biosensors often rely on fluorescent labels, but these can suffer from background autofluorescence in biological matrices, limiting sensitivity. Upconversion nanoparticles (UCNPs) offer an attractive alternative due to their unique ability to convert low-energy light into higher-energy light, resulting in minimal autofluorescence and deeper tissue penetration. However, integrating UCNPs into sensitive FRET-based biosensors often involves intricate and time-consuming bioconjugation procedures to link the UCNPs to recognition elements like aptamers. This paper addresses the need for a simpler, yet effective, FRET biosensor platform that leverages UCNPs while circumventing these complex conjugation steps.

Methods

The core of this work lies in a clever FRET-based sensing strategy.

  1. UCNP Synthesis and Modification: The researchers synthesized NaYF₄:Yb,Er nanoparticles (UCNPs) using a modified hydrothermal route. These initial UCNPs were capped with oleic acid (OA-UCNPs), making them dispersible in organic solvents. To enable aqueous applications, a two-step surface modification was performed:
  2. Ligand Exchange: Oleic acid ligands were exchanged with poly(acrylic acid) (PAA), a negatively charged polymer, creating PAA-UCNPs. This step renders the nanoparticles dispersible in water.
  3. Cationic Polymer Coating: A layer of poly(allylamine hydrochloride) (PAH), a positively charged polymer, was coated onto the PAA-UCNPs. This resulted in positively charged PAH-PAA-UCNPs (ppUCNPs).
  4. Aptamer Attachment: A dye-labeled aptamer (specifically, a lysozyme aptamer labeled with TAMRA) was attached to the surface of the ppUCNPs. This attachment is driven by electrostatic interactions between the negatively charged aptamer and the positively charged ppUCNPs. This creates the FRET pair where UCNPs act as the donor and TAMRA as the acceptor.
  5. FRET Mechanism: In the absence of the target analyte (lysozyme or DNA), the TAMRA-aptamer is in close proximity to the UCNPs due to electrostatic attraction. This proximity facilitates efficient Förster Resonance Energy Transfer (FRET) from the UCNPs to TAMRA, leading to quenched UCNP fluorescence.
  6. Analyte Detection: Upon the addition of lysozyme or its complementary DNA sequence, the aptamer exhibits high affinity and specificity for its target. This binding event causes the aptamer to detach from the UCNP surface, increasing the distance between the UCNP donor and TAMRA acceptor. This separation disrupts FRET, leading to a recovery of the UCNP fluorescence intensity. The degree of fluorescence recovery is directly proportional to the concentration of the target analyte.

Datasets

Not discussed in the paper. The study focuses on the synthesis and characterization of the sensor and its performance with synthesized analytes and biological samples.

Key Insights and Ideas

  • Simplified Bioconjugation: The most significant innovation is the use of a cationic polymer (PAH) as an electrostatic linker to attach the dye-labeled aptamer to the UCNPs. This bypasses the need for covalent bioconjugation, significantly simplifying the sensor fabrication process and potentially improving reproducibility.
  • Electrostatic FRET Control: The electrostatic interaction between the charged polymers and the aptamer is key to controlling the distance between the UCNP donor and the TAMRA acceptor, enabling efficient FRET quenching.
  • Dual Analyte Detection: The platform demonstrates the ability to detect both a protein (lysozyme) and a nucleic acid (DNA) using aptamers, highlighting its versatility.
  • Internal Reference for Ratiometric Detection: The paper mentions that the 655 nm emission of Er³⁺, which is far from TAMRA's absorption, can be used as a reference for ratiometric detection, potentially improving accuracy by compensating for variations in UCNP concentration or excitation power.

Key Results

  • Lysozyme Detection: The sensor showed a linear response for lysozyme detection in the range of 30–210 nM, with a limit of detection (LOD) of 2.5 nM.
  • DNA Detection: For target DNA, a linear range of 40–200 nM was observed, with an LOD of 2.8 nM.
  • Specificity: The sensor demonstrated high specificity for lysozyme, showing minimal response to other biomolecules like α-amylase, BSA, thrombin, and glycine.
  • Real Sample Analysis: The method was successfully applied to detect lysozyme in human saliva and serum samples, with results consistent with reported values and good recovery rates (91.1% to 103.5% in saliva).

Limitations and Future Work

  • Limited Linear Range: While sensitive, the linear ranges for both lysozyme and DNA are relatively narrow.
  • Potential for Interference: Although specificity was demonstrated against a few common biomolecules, the potential for interference from other complex biological components in real samples might still exist and warrants further investigation.
  • Future Directions: The authors suggest that this general method, due to its simplicity and the inherent advantages of UCNPs (low autofluorescence, high penetration depth), can be extended to develop a wide range of fluorescent sensing probes for various targets in biological and analytical applications. They specifically believe it could be further utilized for determining lysozyme in human samples.

Summary updated

Abstract

A novel aptasensor was fabricated for the detection of lysozyme and DNA based on the fluorescence resonance energy transfer (FRET) technique between upconversion nanoparticles (UCNPs) and a dye labeled aptamer. UCNPs can act as excellent emitters due to their low autofluorescence and high penetration depth of biosamples. NaYF<sub>4</sub>:Yb, Er nanoparticles as UCNPs were synthesized and attached with a dye labeled aptamer through a cationic polymer as an electrostatic linker to quench the upconversion fluorescence intensity. The intensity can be restored after the addition of lysozyme or the complementary DNA (target DNA) because of their strong interaction with the aptamer. The sensor provided a linear concentration range from 30 to 210 nM for lysozyme and 40 to 200 nM for the target DNA, the limit of detection was 2.5 nM and 2.8 nM, respectively. The sensor was also used to monitor the lysozyme level in both human saliva and serum samples, and the results were consistent with the reported values. The method was simple and convenient without the extra procedure of bioconjugation, and could be put to use for the determination of various targets in the future.
BibTeX
@article{zhu2014simple,
  author = {Hao Zhu and Yu‐Jie Ding and Anqi Wang and Xu Sun and Xingcai Wu and Jun‐Jie Zhu},
  title = {{A simple strategy based on upconversion nanoparticles for a fluorescent resonant energy transfer biosensor}},
  journal = {Journal of Materials Chemistry B},
  year = {2014},
  doi = {10.1039/c4tb01320d},
}
Figure