A Road-Level Transport Network Model with Microscopic Operational Features for Aircraft Taxi-Out Time Prediction

Xiaowei Tang, Wenjie Zhang, Shengrun Zhang, Cheng‐Lung WuAerospace 2025 · DOI

TL;DR

This paper introduces a novel approach to predicting aircraft taxi-out time by modeling the airport as a road-level transport network with microscopic operational features. By incorporating "estimated taxi time" (derived from link travel time predictions) and "number of handovers" as new features, the model significantly improves prediction accuracy, especially for short-term predictions, which is crucial for efficient airport operations.

What Problem Does This Paper Address?

Accurate prediction of aircraft taxi-out time is vital for optimizing airport surface operations, reducing delays, and minimizing fuel consumption. Traditional models often treat the taxiing process as a black box or focus on macro-level factors, neglecting the detailed dynamics of the airport's taxiway network and the complexities of control handovers between different airport authorities. This oversight limits the precision of predictions, particularly for minute-level support needed in systems like Airport Collaborative Decision Making (A-CDM). The paper aims to bridge this gap by developing a more granular model that captures these microscopic operational details.

Methods

The core of the proposed method is a refined airport road-level transport network model. This model represents the airport's taxiways as a graph, with nodes representing critical locations (intersections, gates) and links representing taxi paths.

Key methodological contributions include:

  • Microscopic Network Modeling: The airport surface is modeled as a road network, allowing for the prediction of "Link Travel Time" (LTT) for individual segments of the taxi path.
  • Simulated Trajectory Data: Since actual taxi trajectory data is not always available, the authors simulate it based on aircraft movement milestones (Actual Off-Block Time and Actual Take-Off Time) and link lengths.
  • New Micro-Features:
    • Estimated Taxi Time: This feature is derived from the predicted LTT of each link in the taxi path.
  • Number of Handovers: This feature quantifies the number of times an aircraft transitions between different control areas (e.g., from Apron Control to Air Traffic Control), acknowledging the potential delays associated with these handovers.
  • Gradient Boosted Regression Trees (GBRT): This ensemble learning algorithm is used for prediction due to its efficiency, accuracy, and ability to capture non-linear feature interactions. It's also noted for its good performance on medium-sized datasets.

Datasets

The study utilizes data from Shanghai Pudong International Airport (PVG), a major international hub. The dataset comprises 20,223 flight information records from the A-CDM system for December 2023. This data includes flight number, departure runway, gate, aircraft type, Actual Off-Block Time (AOBT), and Actual Take Off Time (ATOT). Weather data was also collected from the METAR Weather Service for the same period.

Key Insights and Ideas

  • Microscopic View Matters: The study strongly suggests that breaking down the taxi-out process into smaller, interconnected segments (links) and considering their specific characteristics significantly improves prediction accuracy.
  • Handovers are Critical: The "number of handovers" feature proved to be an important predictor, highlighting that the administrative and procedural aspects of airport operations have a tangible impact on taxi time. This is particularly relevant for large, complex airports like PVG.
  • Estimated Taxi Time is a Powerful Predictor: The "estimated taxi time" derived from LTT predictions was found to be a highly influential feature, underscoring the value of detailed network modeling.
  • Synergy of Micro-Features: Combining both "estimated taxi time" and "number of handovers" yielded the best results, indicating that a holistic approach incorporating both network dynamics and operational procedures is most effective.

Key Results

The introduction of the two novel micro-features led to substantial improvements in taxi-out time prediction accuracy:

  • Within ±1 min error: Accuracy increased from 49.29% (without micro-features) to 54.41% (with both micro-features).
  • Within ±3 min error: Accuracy improved from 88.23% to 94.36%.
  • Within ±5 min error: Accuracy reached an impressive 99.42%, a significant leap from the baseline.

The GBRT model demonstrated good convergence and robustness to parameter changes. Feature importance analysis revealed that "Estimated Taxi Time" was the second most important feature, and "Number of Handovers" also ranked highly, exceeding the importance of many traditional features.

Limitations and Future Work

  • Limited ±1 min Accuracy: While improved, the accuracy within a 1-minute window remains a challenge, indicating inherent uncertainties in the taxi-out process.
  • Airport Specificity: The high importance of certain features (like the limited impact of arrival traffic at PVG) suggests that feature construction might need to be tailored to specific airport configurations.
  • Future Work: The authors suggest expanding the model's applicability to other airports, exploring flow control or dynamic scheduling strategies, and incorporating long-term weather data to better account for factors like pavement conditions and seasonal variations. They also propose further research into the impact of weather on taxiing performance.

Summary updated

Abstract

For aircraft departure, which is a process of multi-resource coordination, strict time limitations, and complex condition constraints, the optimization of taxi-out time prediction is critical for enhancing airport surface operational efficiency, optimizing runway slot utilization, and reducing aircraft ground delay and fuel consumption. By combining aircraft taxi path and network traffic flow features, a refined airport road-level transport network model is constructed to accurately characterize the taxi path topology and node-edge attributes. On this basis, two new micro-features are introduced: estimated taxi time and the number of handovers. Experimental results show that after the introduction of the micro-features, the prediction accuracy of the taxi-out time prediction model within the error of 1 min increases from 49.29% to 54.41%, and the prediction accuracy within the error of 5 min reaches 99.42%. This method effectively addresses the limitations of traditional models that focus solely on the overall taxiing process while neglecting microscopic airfield network dynamics and time consumption during control handover procedures. The method can be integrated into the Airport Collaborative Decision Making (A-CDM) system to provide minute-level support for departure taxi-out time prediction, thereby providing a more precise and operationally aligned temporal benchmark for intelligent apron operations scheduling, aircraft sequencing optimization, and other collaborative decision making processes.
BibTeX
@inproceedings{tang2025road,
  author = {Xiaowei Tang and Wenjie Zhang and Shengrun Zhang and Cheng‐Lung Wu},
  title = {{A Road-Level Transport Network Model with Microscopic Operational Features for Aircraft Taxi-Out Time Prediction}},
  booktitle = {Aerospace},
  year = {2025},
  doi = {10.3390/aerospace12080721},
}
Figure