A Reliable and Simple Method for Fabricating a Poly(Dimethylsiloxane) Electrospray Ionization Chip with a Corner-Integrated Emitter

Xiang Qian, Jie Xu, Cilong Yu, Yan Chen, Quan Yu, Kai Ni, Xiaohao Wang2015 · DOI

TL;DR

Researchers have developed a straightforward and reproducible method to create integrated electrospray ionization (ESI) chips using PDMS. These chips, featuring a unique corner-integrated emitter, offer stable and sensitive performance comparable to commercial fused-silica capillaries, making them ideal for portable mass spectrometry applications.

What Problem Does This Paper Address?

Coupling microfluidic devices with mass spectrometers (MS) for electrospray ionization (ESI) is crucial for various analytical applications, from biological studies to environmental monitoring. However, existing methods for creating integrated emitters on microfluidic chips often involve complex, time-consuming, and expensive fabrication processes, particularly when using hard materials like glass or silicon. While PDMS offers a more accessible alternative, previous PDMS-based emitter fabrication methods still suffered from complexity and reproducibility issues. This paper aims to address these limitations by presenting a simple, reliable, and cost-effective method for fabricating PDMS ESI chips with integrated emitters that can be easily mass-produced.

Methods

The core of this work lies in a novel fabrication process for PDMS microfluidic chips with a corner-integrated emitter. The method utilizes standard soft lithography but incorporates a key innovation: a two-layer photoresist approach for the master fabrication.

  1. Master Fabrication:
    • A first layer of SU-8 photoresist (approx. 30 µm) is exposed using a mask containing alignment marks, reservoir, and microchannel outlines.
  2. A second, thicker layer of SU-8 photoresist (approx. 180 µm) is then spun and exposed with a second mask to define the overall chip outline and, crucially, the diamondoid shape of the microchannel. This second exposure is precisely aligned to the first to ensure the microchannel terminates at the sharp corner of the chip.
  3. This two-layer process creates a "raised layer" which acts as a precise cutting base for the emitter.
  4. PDMS Chip Fabrication:
    • PDMS pre-polymer and curing agent are mixed and poured onto the photoresist master.
  5. After curing, the PDMS layers are peeled off. The raised layer from the master is now embedded in the PDMS.
  6. The excess substrate layer is then carefully cut using a razor blade guided by the raised layer. This "raised layer-based cutting" is a critical step, ensuring stability and preventing damage to the delicate microchannel end, unlike methods relying on simple line markers.
  7. The top and bottom PDMS slices are then bonded, typically after oxygen plasma treatment, to form the complete microfluidic chip.
  8. Hydrophobic Treatment: The fabricated chips undergo a hydrophobic treatment with hexamethyldisilylamine (HMDS) gas to improve their performance.
  9. ESI-MS Coupling: The chip is mounted on a custom platform and coupled to a commercial ion trap mass spectrometer. The electrospray tip is positioned near the MS inlet orifice, and the sample is introduced via a needle into the chip's reservoir, driven by pneumatic pressure. High voltage is applied to generate the electrospray.

Datasets

Not discussed in the paper. The study uses Rhodamine B as a model analyte for performance testing.

Key Insights and Ideas

  • The "Raised Layer" for Precision Cutting: The two-layer photoresist master fabrication is the cornerstone of this method. It creates a defined, raised base that acts as a guide for cutting the PDMS, ensuring precise emitter formation and eliminating variability that can arise from direct cutting on a flat surface. This is a significant improvement over previous methods.
  • Corner-Integrated Emitter Design: Placing the emitter at the sharp corner of the chip simplifies the design and fabrication while effectively directing the spray towards the MS inlet.
  • PDMS Advantages: The use of PDMS offers flexibility, biocompatibility, and ease of fabrication via soft lithography, making it suitable for mass production and integration with other microfluidic modules.
  • Hydrophobic Surface Benefits: The hydrophobic treatment of the PDMS surface is shown to be superior to hydrophilic materials like glass, preventing the Taylor cone from diffusing and leading to a more stable spray.
  • Blunt Tip Configuration: The fabrication process naturally creates a blunt emitter tip, which is advantageous for stable electrospray operation and avoids issues associated with sharp or irregular tips.

Key Results

  • Stable ESI-MS Performance: The fabricated chips demonstrated highly stable electrospray plumes, with a relative standard deviation (RSD) of 5.8% for Rhodamine B ion counts, comparable to a commercial fused-silica capillary (5.0%).
  • High Signal Intensity: The proposed emitter achieved higher average ion counts (around 10^6) compared to the fused-silica capillary (around 10^5).
  • Improved Linearity and Sensitivity: The chip exhibited excellent linearity (R² = 0.992) and sensitivity for Rhodamine B, with a steeper intensity-concentration slope than the capillary, indicating it can detect smaller concentration changes.
  • Low Limit of Detection: The limit of detection for Rhodamine B was estimated to be lower than 0.015 µM.
  • Reproducibility: Chip-to-chip and run-to-run reproducibility tests showed excellent results, with ion counts around 2000 for Rhodamine B at 0.125 µM, verifying the reliability of the fabrication process.
  • Cost-Effectiveness and Simplicity: The method is described as quick, easy, requiring less equipment, and potentially lower cost compared to other methods.

Limitations and Future Work

  • PDMS Porosity: The authors acknowledge that PDMS is a porous material and can absorb small molecules, potentially affecting sensitivity. While solvent extraction and surface modification can mitigate this, the effect is sample-dependent. Future research should investigate Rhodamine B's adsorption and its impact.
  • Ultimate Sensitivity: While the current setup shows good performance, the authors suggest further optimization of the ion transport system, the mass spectrometer, and the overall experimental setup to reveal the ultimate sensitivity in the nanoelectrospray regime.
  • Portable MS Integration: The paper highlights the potential for integrating these chips into portable MS instruments for on-site analysis, a direction for future development.
  • Sample Matrix Effects: While Rhodamine B performance is good, the paper doesn't extensively explore matrix effects with more complex samples.

Summary updated

BibTeX
@misc{qian2015reliable,
  author = {Xiang Qian and Jie Xu and Cilong Yu and Yan Chen and Quan Yu and Kai Ni and Xiaohao Wang},
  title = {{A Reliable and Simple Method for Fabricating a Poly(Dimethylsiloxane) Electrospray Ionization Chip with a Corner-Integrated Emitter}},
  year = {2015},
  doi = {10.3390/s150408931},
}

Loading related content...

Figure