A Pt-Doped TiO2 Nanotube Arrays Sensor for Detecting SF6 Decomposition Products

Xiaoxing Zhang, Jing Tie, Jinbin Zhang2013 · DOI

TL;DR

This paper presents a novel gas sensor based on platinum-doped titanium dioxide (TiO2) nanotube arrays for detecting sulfur hexafluoride (SF6) decomposition products. The Pt-doped sensor demonstrates improved selectivity and a lower optimal operating temperature compared to its undoped counterpart, offering a promising solution for real-time monitoring of SF6 gas in gas-insulated switchgear (GIS).

What Problem Does This Paper Address?

Gas-insulated switchgear (GIS) relies on SF6 gas for its excellent insulating and arc-extinguishing properties. However, partial discharge (PD) within GIS can cause SF6 to decompose into various harmful byproducts, such as SF4, SF3, SF2, SOF4, SOF2, SO2F2, SO2, and HF. Detecting and analyzing these decomposition products is crucial for assessing the health and operating state of GIS equipment, preventing potential failures, and ensuring grid reliability. Current detection methods, like gas chromatography and infrared absorption spectrometry, are typically offline laboratory techniques, making on-site, real-time monitoring challenging. This paper addresses the need for a sensitive, selective, and practical sensor for detecting these SF6 decomposition products in situ.

Methods

The researchers developed a Pt-doped TiO2 nanotube array (TiO2NTs) sensor using a pulsed electrochemical deposition method. This method involved depositing platinum nanoparticles onto pre-fabricated intrinsic TiO2NTs, which were themselves prepared via anodic oxidation. The sensor fabrication involved applying conductive silver glue to the Pt-doped TiO2NTs to create electrical contacts.

The gas sensing performance was evaluated using a custom-built test device that allowed for controlled injection of SF6 decomposition gases (SO2, SOF2, and SO2F2) into a sealed quartz glass tube containing the sensor. The sensor's resistance was measured using an impedance analyzer, and its temperature was precisely controlled. The sensitivity (R%) was calculated as the relative change in resistance. The response mechanism was investigated by comparing the behavior of intrinsic and Pt-doped sensors and by analyzing the redox reactions occurring on the sensor surface. Recovery tests were performed to assess the sensor's ability to return to its baseline state after exposure to target gases, with UV irradiation being explored as a method to overcome chemical poisoning.

Datasets

Not discussed in the paper. The experiments involved controlled introduction of specific SF6 decomposition gases (SO2, SOF2, SO2F2) at various concentrations.

Key Insights and Ideas

  • Pt doping enhances selectivity and lowers operating temperature: The introduction of platinum nanoparticles significantly alters the gas sensing characteristics of TiO2NTs. Notably, it shifts the sensor's selectivity towards specific SF6 decomposition products and reduces the optimal operating temperature from around 150°C for intrinsic TiO2NTs to a similar range for Pt-doped sensors, but with a sharper response decline at higher temperatures.
  • Mechanism of sensing involves redox reactions: The negative response values (resistance decrease) observed for both intrinsic and Pt-doped sensors when exposed to SO2, SOF2, and SO2F2 indicate that these gases act as reducing agents or electron donors. The reaction involves the reduction of adsorbed oxygen ions on the TiO2 surface.
  • Pt acts as an oxygen storage point: Platinum's role as a catalyst is crucial. It acts as an oxygen storage point, continuously providing adsorbed oxygen (Oads) to the TiO2NTs sensor surface. This catalytic effect lowers the activation energy for oxygen adsorption and enhances the reaction rate, contributing to improved sensitivity and a lower optimal operating temperature.
  • Chemical poisoning and UV recovery: The sensor exhibits signs of chemical poisoning, particularly from SO2, where the resistance does not fully revert to its initial value. However, UV irradiation effectively desorbs the poisoned species, restoring the sensor's sensitivity and repeatability. This suggests a pathway to mitigate long-term performance degradation.
  • Selectivity shift with Pt doping: While intrinsic TiO2NTs show a response order of SO2 > SOF2 > SO2F2, the Pt-doped sensor exhibits a different selectivity order: SO2F2 > SO2 > SOF2. This change in selectivity is a key finding, making the Pt-doped sensor more suitable for detecting specific decomposition products.

Key Results

  • The Pt-doped TiO2NTs sensor showed a strong response to SO2F2, a weaker response to SOF2 and SO2, indicating good selectivity for SO2F2.
  • The optimal operating temperature for the Pt-doped TiO2NTs sensor was found to be approximately 150°C. At 200°C, the sensitivity sharply declined, and at 240°C, it was nearly zero.
  • The sensor exhibited linear relationships between response (R%) and gas concentration for SO2, SOF2, and SO2F2 within tested ranges, with high correlation coefficients (R² values of 0.984, 0.974, and 0.992, respectively).
  • For SO2F2, the response values at 30, 50, 70, and 100 ppm were 8.65%, 17.91%, 27.86%, and 38.02%, respectively.
  • UV irradiation was demonstrated to effectively recover the sensor's performance after chemical poisoning by SO2 and SO2F2.

Limitations and Future Work

  • Toxicity of SF6 decomposition products: The paper notes that SF6 decomposition products like SO2 can poison the Pt catalyst, affecting sensor performance. While UV irradiation helps, long-term stability and resistance to poisoning under continuous exposure remain areas for further investigation.
  • Selectivity for other decomposition products: The study focused on SO2, SOF2, and SO2F2. Future work could explore the sensor's response to other SF6 decomposition products like HF and SF4.
  • Real-world testing: The experiments were conducted under controlled laboratory conditions. Testing the sensor in actual GIS environments with complex gas mixtures and varying humidity would be a crucial next step.
  • Optimization of Pt doping: Further research could focus on optimizing the amount and distribution of Pt nanoparticles to further enhance sensitivity, selectivity, and long-term stability.
  • Response to mixed gases: Investigating the sensor's performance in the presence of multiple decomposition products simultaneously would be important for practical applications.

Summary updated

BibTeX
@misc{zhang2013pt,
  author = {Xiaoxing Zhang and Jing Tie and Jinbin Zhang},
  title = {{A Pt-Doped TiO2 Nanotube Arrays Sensor for Detecting SF6 Decomposition Products}},
  year = {2013},
  doi = {10.3390/s131114764},
}

Loading related content...

Figure