A Portable Support Attitude Sensing System for Accurate Attitude Estimation of Hydraulic Support Based on Unscented Kalman Filter

Xuliang Lu, Zhongbin Wang, Chao Tan, Haifeng Yan, Lei Si, Wei DongSensors 2020 · DOI

TL;DR

This paper introduces a novel, intrinsically safe sensing system for accurately estimating the attitude (pitch, roll, and yaw) of hydraulic supports in automatic coal mining environments. By combining MEMS inertial sensors with a gradient descent-optimized Unscented Kalman Filter (UKF) that leverages sensor fusion and tunes process noise covariance, the system achieves high accuracy even in challenging, magnetically noisy conditions.

What Problem Does This Paper Address?

Accurate attitude estimation of hydraulic supports is crucial for safety and intelligent operation in automated coal mining. However, existing methods struggle with the harsh, electromagnetically noisy environment of coal mines, where magnetic fields from coal seams and heavy machinery can corrupt magnetometer readings. Furthermore, relying solely on gyroscopes and accelerometers leads to drift and time-dependent inaccuracies. The paper aims to overcome these limitations by developing a robust, portable, and cost-effective system that can reliably measure support attitude in real-time, even under significant magnetic interference.

Methods

The core of the proposed solution is a nine-axis inertial measurement unit (IMU) comprising a gyroscope, accelerometer, and magnetometer. To fuse the data from these sensors and mitigate individual sensor limitations, the authors employ a quaternion-based Unscented Kalman Filter (UKF). Quaternions are chosen for their efficiency and ability to avoid the "gimbal lock" problem common with Euler angles.

A key innovation is the optimization of the UKF's process noise covariance (Q) using a gradient descent algorithm. This is crucial because the process noise covariance significantly impacts the filter's performance, especially in dynamic and noisy environments like coal mines. By tuning Q, the system can better adapt to the unpredictable vibrations and accelerations experienced by the hydraulic support. The authors also detail how the observation noise covariance (R) is determined from sensor deviations.

Datasets

The paper does not explicitly mention training datasets. Evaluation was performed using:

  • Two-axis turntable experimental platform: This platform simulates static and dynamic conditions for pitch, roll, and yaw angles within ranges relevant to actual hydraulic support operation.
  • Industrial application: The system was tested in a real-world coal mining environment (13230 coal mining working face).

Key Insights and Ideas

  • Sensor Fusion for Harsh Environments: The combination of magnetometers (for absolute yaw reference, despite interference), gyroscopes (for dynamic motion), and accelerometers (for static orientation) is essential for robust attitude estimation. The UKF effectively fuses these complementary data streams.
  • Gradient Descent for UKF Tuning: Optimizing the process noise covariance (Q) of the UKF using gradient descent is a critical step. This allows the filter to adapt to the specific noise characteristics of the mining environment, leading to significantly improved accuracy compared to using empirically set Q values.
  • Quaternion Advantage: Using quaternions for attitude representation elegantly handles the complex rotations and avoids the singularity issues associated with Euler angles, making the implementation more robust.
  • Intrinsic Safety and Cost-Effectiveness: The system's design emphasizes intrinsic safety and uses low-cost MEMS sensors, making it suitable for deployment in explosive mining atmospheres and cost-sensitive applications.

Key Results

  • Pitch and Roll Accuracy: The proposed GD-UKF system achieved dynamic measurement accuracy better than 1° and static measurement accuracy better than 0.5°.
  • Yaw Accuracy: The average measurement error for yaw angle was less than 2°. While this is good, the paper notes that in environments with less magnetic interference (like the lab), the difference between GD-UKF and other methods was less pronounced.
  • Performance Comparison: The GD-UKF significantly outperformed traditional Kalman Filter (KF) and standard Unscented Kalman Filter (UKF) in terms of estimation error, particularly for pitch and roll angles. The estimation errors for KF and UKF were notably larger (e.g., >3° for KF, >2.4° for UKF).
  • Industrial Validation: The system demonstrated practical feasibility and effectiveness in a real coal mining operation, providing attitude information to a remote monitoring center.

Limitations and Future Work

  • Yaw Estimation in Magnetic Disturbances: The paper acknowledges that eliminating yaw estimation errors in environments with complex magnetic disturbances (like those caused by high-power mining equipment) remains a challenge.
  • Future Work: The authors propose to focus on improving yaw angle estimation algorithms for these complex magnetic environments. This may involve updating covariance calculations to account for other interference factors and exploring intelligent tuning algorithms based on machine learning and statistical models to further refine covariance estimation.

Summary updated

Abstract

To measure the support attitude of hydraulic support, a support attitude sensing system composed of an inertial measurement unit with microelectromechanical system (MEMS) was designed in this study. Yaw angle estimation with magnetometers is disturbed by the perturbed magnetic field generated by coal rock structure and high-power equipment of shearer in automatic coal mining working face. Roll and pitch angles are estimated using the MEMS gyroscope and accelerometer, and the accuracy is not reliable with time. In order to eliminate the measurement error of the sensors and obtain the high-accuracy attitude estimation of the system, an unscented Kalman filter based on quaternion according to the characteristics of complementation of the magnetometer, accelerometer and gyroscope is applied to optimize the solution of sensor data. Then the gradient descent algorithm is used to optimize the key parameter of unscented Kalman filter, namely process noise covariance, to improve the accuracy of attitude calculation. Finally, an experiment and industrial application show that the average measurement error of yaw angle is less than 2° and that of pitch angle and roll angle is less than 1°, which proves the efficiency and feasibility of the proposed system and method.
BibTeX
@inproceedings{lu2020portable,
  author = {Xuliang Lu and Zhongbin Wang and Chao Tan and Haifeng Yan and Lei Si and Wei Dong},
  title = {{A Portable Support Attitude Sensing System for Accurate Attitude Estimation of Hydraulic Support Based on Unscented Kalman Filter}},
  booktitle = {Sensors},
  year = {2020},
  doi = {10.3390/s20195459},
}
Figure