TL;DR
This study uses numerical modeling to investigate the impact of coal mine drainage on groundwater quality in Xinjiang, China. It reveals that stopping mine water drainage significantly alters groundwater flow and pollutant migration, potentially leading to widespread contamination. The research highlights the effectiveness of high-capacity pumping wells in mitigating these risks, offering crucial insights for environmental protection strategies.
What Problem Does This Paper Address?
As China transitions towards a "dual carbon" economy, many coal mines are slated for closure. A major concern is what happens to the vast amounts of mine water that are currently being managed. If drainage and treatment cease, this water, often characterized by high salinity and pollutant concentrations, could escape and cause severe secondary damage to local groundwater resources. This is particularly critical in regions like Xinjiang, where groundwater is a vital source for drinking and irrigation. The paper addresses the urgent need to understand and predict the future groundwater contamination risks associated with mine closure and to explore effective remediation strategies.
Methods
The researchers employed a numerical modeling approach using the FEFLOW software to simulate groundwater flow and solute transport. They developed a 2D groundwater flow model of the Wudong Coal Mine area and calibrated it using available hydrogeological data. Subsequently, they designed several prediction scenarios to analyze the impact of:
- Stopping mine water drainage: Simulating the consequences of ceasing drainage operations after 5 years.
- Varying pollution source sizes: Investigating how different magnitudes of pollutant leakage affect groundwater.
- Implementing water treatment pumping wells: Evaluating the effectiveness of pumping wells at different rates (200 m³/d and 1000 m³/d) in controlling pollutant migration.
The study focused on sulfate (SO₄²⁻) as the primary pollutant indicator due to its high concentration in the mine water.
Datasets
The study utilized geological and hydrogeological data from the Wudong Coal Mine, including pumping test results and field measurements for parameters like conductivity and porosity. While specific observational data for groundwater head and river flow over long periods were limited, the model was validated against available data for mine water discharge and hydraulic head. No new benchmark datasets were introduced.
Key Insights and Ideas
- Mine drainage is a critical control: The continued drainage of mine water actively maintains the existing groundwater flow regime and captures pollutants within the mine area. Stopping this drainage fundamentally alters the system.
- Stopping drainage leads to plume expansion: Without active drainage, the cone of depression dissipates, allowing groundwater levels to rise. This can reverse the natural flow direction, pushing pollutants away from the mine and towards downstream areas, including vital water sources like the Urumqi River.
- Pollution source size matters: Larger pollution sources lead to higher pollutant concentrations and a wider spread of contamination, increasing the risk to surrounding environments and human populations.
- Pumping wells are effective, especially at higher rates: While even low-rate pumping wells can influence pollutant migration, higher pumping rates (e.g., 1000 m³/d) are significantly more effective at capturing and containing pollutant plumes, drastically reducing concentrations at observation points and preventing them from reaching critical water sources.
Key Results
- Base Case (continuous drainage): For the simulated 25 years with continuous drainage, the flow and solute distribution remained relatively stable, with pollutants largely contained within the mine boundary.
- Stopping Drainage (Base Case): After stopping drainage in year 5, the cone of depression disappeared within approximately 150 days. Pollutant plumes shifted from an upstream to a downstream direction, creating a larger affected area.
- Larger Pollution Source: A larger pollution source (4000 nodes vs. 2500 nodes) resulted in higher sulfate concentrations (up to 54.0 mg/L compared to 44.5 mg/L in the base case at the observation point) and a wider plume, increasing the risk to downstream river water and groundwater.
- Pumping Well Effectiveness:
- A 200 m³/d pumping rate showed some influence on pollutant migration over time, gradually drawing the plume towards the well.
- A 1000 m³/d pumping rate demonstrated a much stronger effect, significantly concentrating the plume around the well and effectively preventing the 1 mg/L contour from reaching the Urumqi River. This higher rate reduced peak concentrations at the observation point to approximately 10 mg/L, compared to 34 mg/L with the lower rate.
Limitations and Future Work
The authors acknowledge that the scarcity of detailed observation data for groundwater head and river flow over long periods limited the precision of the model's input data, potentially affecting the accuracy of predictive results. They suggest that future work could benefit from more comprehensive field data. The study primarily focused on a 2D model, and a 3D model could provide a more detailed representation of complex hydrogeological conditions. The research provides a strong foundation for decision-making, but further site-specific investigations and the integration of other pollutant types would enhance the understanding of mine water pollution risks.
Summary updated