A Numerical Study of Mixed Convection in Square Lid-Driven with Internal Elliptic Body and Constant Flux Heat Source on the Bottom Wall

M. Jahirul Haque Munshi, Md. Abdul Alim, Mohammed Eunus Ali, M. S. AlamJournal of Scientific Research 2017 · DOI

Introduction

Mixed convection—the interaction between pressure-driven forced flow and buoyancy-driven natural flow—is a fundamental process in thermal management. This study presents a numerical investigation into these dynamics within a square enclosure featuring moving side walls, a central elliptic obstruction, and a localized heat source. Such configurations are representative of real-world systems like electronic cooling units and chemical reactors.

Problem Formulation

The system consists of a square cavity where the vertical side walls move downward at a constant velocity and are maintained at a cold temperature ($T_c$). The horizontal walls are adiabatic (insulated), except for a central segment on the bottom wall where a constant heat flux ($q$) is applied. An adiabatic elliptic body is positioned at the center of the cavity, acting as a physical and thermal barrier. Additionally, a magnetic field of strength $B$ is applied parallel to the x-axis.

Schematic of the physical model and boundary conditions.

Numerical Methodology

The researchers employed the Finite Element Method (FEM) to solve the Navier-Stokes and Energy equations. The fluid (air, $Pr = 0.733$) is modeled using the Boussinesq approximation. The governing equations were discretized using the Galerkin weighted residual method and solved iteratively via the Newton-Raphson technique.

To ensure the accuracy of the results, a grid independence study was performed across five mesh densities. The final simulations utilized a mesh of 25,482 triangular elements, where the Nusselt number ($Nu$) and average temperature ($\theta_{av}$) showed stable convergence, ensuring that the results are independent of the mesh size.

Grid independence study results showing convergence of the Nusselt number and average temperature across different mesh densities.

Key Insights and Results

The study primarily examines the influence of the Richardson number ($Ri$), which dictates the balance between buoyancy and mechanical forces.

Flow Regime Transition

  • Forced Convection Dominance ($Ri = 0.01$): At low Richardson numbers, the downward motion of the side walls dominates the fluid motion. This results in weak, asymmetric circulation patterns.
  • Buoyancy Dominance ($Ri = 10$): As $Ri$ increases, thermal buoyancy takes over. Strong, symmetric recirculation eddies form, significantly altering the flow structure.

Heat Transfer Performance

The internal elliptic body forces the rising plume of heated fluid to split, dictating the temperature distribution in the upper cavity. As the system moves from conduction-dominated flow (low $Ri$) to convection-dominated flow (high $Ri$), the Nusselt number increases. For instance, at a Grashof number ($Gr$) of 10, the $Nu$ rose from 49.98 ($Ri=0.01$) to 50.11 ($Ri=10$). This indicates that buoyancy-driven currents are more effective at transporting heat from the source to the cold walls.

Conclusion

This research highlights the critical role of the Richardson number in determining heat transfer efficiency in complex geometries. The presence of an internal obstacle significantly modifies the convective patterns, a factor that must be accounted for in industrial design. Future studies could expand this work by investigating three-dimensional effects or the use of nanofluids to further enhance thermal performance.

Summary updated

Abstract

The mixed convection in square lid-driven with internal elliptic body and constant flux heat source on the bottom wall is numerically simulated in this paper following a finite element method approach. The left moving wall and right moving wall are cold. The upper wall is insulated and so is the lower wall with heat flux located in the middle. The magnetic field of strength B is applied parallel to x- axis. Result is presented for different Richardson numbers (0.01 ? Ri ? 10) when Grashof numbers are (10 ? Gr ? 50) and Prandtl number is taken as Pr = 0.733 for all computations. The influence of the Richardson number on heat source surface is being investigated in this paper. Results are presented in the form of streamline and isotherm plots as well as the variation of the maximum temperature and Nusselt number at the heat source surface under different conditions. A detailed analysis of flow pattern shows that the mixed convection is based on the parameters Richardson number (Ri), Grashof number (Gr) and Reynolds number (Re).
BibTeX
@article{munshi2017numerical,
  author = {M. Jahirul Haque Munshi and Md. Abdul Alim and Mohammed Eunus Ali and M. S. Alam},
  title = {{A Numerical Study of Mixed Convection in Square Lid-Driven with Internal Elliptic Body and Constant Flux Heat Source on the Bottom Wall}},
  journal = {Journal of Scientific Research},
  year = {2017},
  doi = {10.3329/jsr.v9i2.29644},
}
Figure