A Novel Screening Technique for Ulnar-Sided Carpometacarpal Dislocations

Vishnu C. Potini, Peter D. Gibson, Kaicheng Wu, Kang Li, Virak TanOrthopedics 2016 · DOI

TL;DR

This paper introduces a novel, simple radiographic screening technique to improve the diagnosis of ulnar-sided carpometacarpal (CMC) joint dislocations, which are notoriously difficult to detect. By measuring the "capitate-metacarpal angle" on standard lateral hand X-rays, clinicians can more reliably identify potential dislocations, reducing the risk of missed diagnoses and subsequent complications.

What Problem Does This Paper Address?

Ulnar-sided CMC joint dislocations, particularly involving the fourth and fifth metacarpals, are often subtle and easily missed during initial physical and radiographic examinations. This diagnostic challenge stems from the complex anatomy of the wrist and the limitations of standard imaging techniques, where overlapping bones can obscure critical details. Missed or delayed diagnoses can lead to chronic pain, arthritis, and reduced grip strength, often necessitating more complex surgical interventions with less favorable outcomes. Existing screening methods have their own limitations, such as being highly dependent on perfect radiographic positioning or difficult to interpret due to bone overlap. The authors aim to provide a more accessible and reliable screening tool for clinicians.

Methods

The researchers developed a novel screening technique based on measuring the angle between the capitate bone and the fourth and fifth metacarpals on lateral hand radiographs. This "capitate-metacarpal angle" was hypothesized to be significantly different in patients with ulnar-sided CMC dislocations compared to those without.

To implement and validate this, they conducted a retrospective study:

  • Study Group: Patients who underwent surgery for ulnar-sided CMC dislocations and had pre-operative posteroanterior (PA) and lateral radiographs, along with CT scans.
  • Control Group: Patients with both CT scans and plain radiographs of the hand/wrist but no carpal or metacarpal pathology.

Key methodological aspects include:

  • Radiographic Analysis: Two authors identified the contours of the capitate and the second, fourth, and fifth metacarpals on plain radiographs.
  • 3D Reconstruction: CT scan data was used to create 3D models (using Mimics software) to generate a "true lateral" sagittal plane image. This was crucial for accounting for potential rotational variability in standard lateral radiographs.
  • Angle Calculation: The angles were calculated using MATLAB software. This included the capitate-metacarpal angle (for both the fourth and fifth metacarpals) and the intermetacarpal angle (between the second and fifth metacarpals) for comparison with a previously proposed method.
  • Statistical Analysis: Student's t-test was used to compare angles between groups, and a scatter plot analysis helped determine a screening threshold. Interobserver reliability was assessed using intraclass correlation coefficients.

Datasets

The study utilized retrospective data from patients treated at Rutgers University-New Jersey Medical School.

  • Study Group Data: Radiographs and CT scans from 10 men with 18 ulnar-sided CMC dislocations.
  • Control Group Data: Radiographs and CT scans from patients without carpal or metacarpal pathology.

No new datasets were introduced; the study focused on analyzing existing patient imaging data.

Key Insights and Ideas

  • Capitate as a Stable Landmark: The capitate bone is consistently visible and relatively stable on lateral radiographs, making it an excellent reference point for measuring angles, unlike other bones that might be more difficult to identify or prone to overlap.
  • Angle Changes in Dislocation: Ulnar-sided CMC dislocations lead to a measurable increase in the angle between the capitate and the affected metacarpals. This geometric change is a direct consequence of the joint disruption.
  • Robustness to Rotation: The capitate-metacarpal angle measurement proved to be relatively unaffected by variations in the rotation of standard lateral radiographs, a significant advantage over methods that require precise positioning.
  • Simplicity and Accessibility: The technique is designed to be straightforward, using standard lateral hand X-rays and readily available software (or even a goniometer/angle tool), making it accessible to a broad range of clinicians and trainees.

Key Results

  • Capitate-Metacarpal Angle:
    • Control group average: 10° (range, 2°-21°)
    • Study group average: 19° (range, 9°-29°)
    • This difference was statistically significant (P<.01).
  • Screening Performance (using a 15° cutoff on 2D radiographs):
    • Sensitivity: 0.85 (correctly identifying 85% of dislocations)
    • Specificity: 0.79 (correctly identifying 79% of non-dislocations)
  • Intermetacarpal Angle (McDonald et al. method):
    • Control group average: 8° (range, 4°-23°)
    • Study group average: 13° (range, 0°-25°)
    • This difference was not statistically significant (P=.08) in the 2D analysis, suggesting the capitate-metacarpal angle is a more sensitive indicator in this context.
  • 3D Reconstruction Results: Similar significant differences were observed, reinforcing the findings from 2D analysis.
  • Interobserver Reliability: High reliability was demonstrated for all measured angles (mean intraclass correlation coefficients of 0.93-0.95), indicating consistency in measurements.

Limitations and Future Work

  • Retrospective Nature: The study's retrospective design limits the ability to definitively assess the true effectiveness of the screening method in preventing missed injuries or to determine the exact percentage of missed injuries.
  • Uncommon Injury: The relative rarity of ulnar-sided CMC dislocations meant that the study group size was limited, which can impact the power of statistical analyses and the generalizability of outcome measurements.
  • Strict Inclusion Criteria: The focus on operatively treated dislocations further restricted the study group size.
  • False Negatives: The authors acknowledge that a screening value of 15° can still result in false-negative findings, emphasizing that the technique should be used in conjunction with a thorough patient history and physical examination.

Future Work: The authors suggest that while this method is a valuable screening tool, it should prompt further investigation with advanced imaging (like CT scans) when an increased capitate-metacarpal angle is detected, especially in patients presenting with dorsal hand swelling and ulnar-sided hand pain.

Summary updated

Abstract

Diagnosing ulnar-sided carpometacarpal joint dislocation is difficult, and more than half of injuries are missed on initial examination. The authors hypothesized that measuring the angle between the capitate and the metacarpals (capitate-metacarpal angle) on a plain radiograph would provide a simple, reliable tool to aid in the diagnosis of ulnar-sided carpometacarpal dislocation. This study retrospectively reviewed patients who underwent surgery for ulnar-sided carpometacarpal dislocation (study group). Two authors identified the contour of the capitate and the second, fourth, and fifth metacarpals on plain radiographs. The control group consisted of patients who had radiographs and no bony carpal or metacarpal pathology. Information on the contour of each bone was entered into MATLAB, version 8.5, software (MathWorks, Natick, Massachusetts), which calculated the 2-dimensional angles. A 3-dimensional model based on computed tomography scan data was used to obtain a "true lateral" image to account for variable rotation on plain radiographs. With the use of conventional lateral hand radiographs, the average capitate-metacarpal angle in the control group was 10° compared with 19° in the study group. Using a screening value of 15° on plain radiographs, the sensitivity of the capitate-metacarpal angle was 0.85 and the specificity was 0.79. Both 2-dimensional and 3-dimensional measurements showed that the angle between the capitate and the lesser metacarpals is a reliable screening tool for carpometacarpal dislocation. During evaluation of patients with posttraumatic hand pain, an increased capitate-metacarpal angle may indicate the need for advanced imaging studies to further evaluate the carpometacarpal joints. [Orthopedics. 2017; 40(2):e352-e356.].
BibTeX
@inproceedings{potini2016novel,
  author = {Vishnu C. Potini and Peter D. Gibson and Kaicheng Wu and Kang Li and Virak Tan},
  title = {{A Novel Screening Technique for Ulnar-Sided Carpometacarpal Dislocations}},
  booktitle = {Orthopedics},
  year = {2016},
  doi = {10.3928/01477447-20161219-04},
}
Figure