A Novel Parametric Modeling Method and Optimal Design for Savonius Wind Turbines

Baoshou Zhang, Baowei Song, Zhaoyong Mao, Wenlong Tian, Boyang LiEnergies 2017 · DOI

TL;DR

This paper introduces a novel, simplified parametric modeling approach for Savonius wind turbine blades, reducing design complexity to just two parameters. By combining this with CFD simulations, Kriging surrogate modeling, and Particle Swarm Optimization (PSO), they achieved a "hook-shaped" blade design that significantly boosts power output and reduces weight compared to traditional designs.

What Problem Does This Paper Address?

Savonius wind turbines are attractive for their simplicity, low cost, and ability to operate in various wind conditions, making them suitable for small-scale distributed power generation. However, their relatively low efficiency has limited their widespread adoption. While many studies have explored modifications to improve performance, the complexity of blade geometry and the vast design space have made optimization challenging. This paper aims to tackle this by proposing a more efficient and effective parametric modeling and optimization framework to find an improved Savonius blade shape.

Methods

The core of this work lies in a novel parametric modeling method inspired by polar coordinates. Instead of complex curves, a quadratic polynomial is "bent" and rotated to define the blade shape, requiring only two parameters ($a_1$ and $a_2$). This significantly simplifies the design space.

The optimization process involved:

  • Computational Fluid Dynamics (CFD): Ansys Fluent was used to simulate the aerodynamic performance (specifically, the power coefficient, $C_p$) of various blade designs.
  • Kriging Method: This statistical technique was employed to build surrogate models (response surfaces) that predict $C_p$ based on the design parameters ($a_1$, $a_2$). This avoids running expensive CFD simulations for every possible design.
  • Particle Swarm Optimization (PSO): This metaheuristic algorithm was used to search the response surfaces generated by Kriging to find the combination of $a_1$ and $a_2$ that maximizes $C_p$.

The authors also performed mesh independence and time step validation for their CFD simulations to ensure accuracy.

Datasets

Not discussed in the paper. The study relies on numerical simulations and experimental data from existing literature for validation.

Key Insights and Ideas

  • Simplifying Complexity: The key insight is that a complex blade shape can be effectively described and optimized using just two parameters by leveraging a bent quadratic polynomial inspired by polar coordinates. This dramatically reduces the dimensionality of the design problem.
  • "Hook" Shape Advantage: The optimized blade shape, described as a "hook," demonstrates superior aerodynamic performance. This shape appears to capture more airflow on the advancing blade and potentially reduces drag during the returning phase.
  • Synergistic Optimization: The combination of a simplified parametric model, accurate CFD simulations, efficient Kriging surrogate models, and a robust optimization algorithm like PSO proves to be a powerful approach for turbine design.
  • Weight Reduction: Beyond aerodynamic improvements, the optimized blade design also leads to a significant reduction in material usage and weight, which is crucial for manufacturing and installation.

Key Results

  • Power Coefficient Improvement: The optimal Savonius turbine achieved a power coefficient ($C_p$) of 0.262, a 6% increase from the classical design's $C_p$ of 0.247.
  • Weight Reduction: The weight of the optimized blade was reduced by 17.9% compared to the initial design.
  • Torque Coefficient: The amplitude of the instantaneous torque coefficient ($C_m$) for the optimal design was significantly higher than that of the classical design.
  • Validation: CFD simulation results were found to be consistent with experimental data from existing literature, validating the numerical method.

Limitations and Future Work

  • Blade Shape Simplification: While the two-parameter model is a significant improvement, the authors acknowledge that cubic polynomial curves or higher-order curves could potentially describe even more precise blade shapes for future investigations.
  • Returning Process Optimization: The study notes that while overall performance improved, the returning process of the blade did not show significant gains. Future work could focus on reducing wind torque during this phase.
  • Other Design Variables: This study primarily focused on blade shape optimization. Future research could incorporate other design variables like overlap ratio, end plates, and rotor height to further enhance performance.
  • 3D Effects: The current study used 2D simulations. Extending the analysis to 3D would provide a more comprehensive understanding of the turbine's performance, especially considering the impact of end plates.

Summary updated

Abstract

Under the inspiration of polar coordinates, a novel parametric modeling and optimization method for Savonius wind turbines was proposed to obtain the highest power output, in which a quadratic polynomial curve was bent to describe a blade. Only two design parameters are needed for the shape-complicated blade. Therefore, this novel method reduces sampling scale. A series of transient simulations was run to get the optimal performance coefficient (power coefficient C p) for different modified turbines based on computational fluid dynamics (CFD) method. Then, a global response surface model and a more precise local response surface model were created according to Kriging Method. These models defined the relationship between optimization objective Cp and design parameters. Particle swarm optimization (PSO) algorithm was applied to find the optimal design based on these response surface models. Finally, the optimal Savonius blade shaped like a “hook” was obtained. Cm (torque coefficient), Cp and flow structure were compared for the optimal design and the classical design. The results demonstrate that the optimal Savonius turbine has excellent comprehensive performance. The power coefficient Cp is significantly increased from 0.247 to 0.262 (6% higher). The weight of the optimal blade is reduced by 17.9%.
BibTeX
@inproceedings{zhang2017novel,
  author = {Baoshou Zhang and Baowei Song and Zhaoyong Mao and Wenlong Tian and Boyang Li and Bo Li},
  title = {{A Novel Parametric Modeling Method and Optimal Design for Savonius Wind Turbines}},
  booktitle = {Energies},
  year = {2017},
  doi = {10.3390/en10030301},
}
Figure