A Novel Ocean Thermal Energy Driven System for Sustainable Power and Fresh Water Supply

Qingfen Ma, Yun Zheng, Hui Lu, Jingru Li, Shenghui Wang, Chengpeng Wang, Zhongye Wu, Yijun Shen, Xuejin LiuMembranes 2022 · DOI

TL;DR

This paper proposes a novel integrated system that combines Ocean Thermal Energy Conversion (OTEC) with Membrane Distillation (MD) for simultaneous power and fresh water generation. By effectively utilizing the waste heat from the OTEC process, the system significantly boosts thermal efficiency and offers a promising solution for sustainable energy and water supply in tropical regions.

What Problem Does This Paper Address?

Ocean Thermal Energy Conversion (OTEC) harnesses the temperature difference between warm surface and cold deep ocean water to generate electricity. While it's a renewable and abundant energy source, traditional OTEC systems suffer from low thermal efficiency (typically 2-4%), making them economically less competitive than conventional power plants. This low efficiency, coupled with the high initial investment, has limited OTEC's widespread adoption, especially for tropical islands that often face simultaneous shortages of both power and fresh water. The paper addresses this by proposing an integrated system that not only generates power but also produces desalinated water, thereby improving overall energy utilization and economic viability.

Methods

The core of the paper is the proposal and analysis of a novel integrated system comprising two sub-cycles: a Power Generation Sub-Cycle (PGC) and a Water Production Sub-Cycle (WPC).

  • Power Generation Sub-Cycle (PGC): This sub-cycle utilizes an organic Rankine cycle with ammonia as the working fluid. Warm surface seawater acts as the heat source, and cold deep seawater serves as the heat sink. A solar collector is included for temperature compensation to ensure stable turbine operation.
  • Water Production Sub-Cycle (WPC): This sub-cycle employs Direct Contact Membrane Distillation (DCMD) for seawater desalination. Crucially, it utilizes the warm seawater discharged from the PGC as the feed for the DCMD modules. The cold seawater from the PGC's condenser is used to cool the permeate channel.
  • Modeling and Analysis: The researchers developed detailed mass, energy, and exergy balance models for individual components, sub-cycles, and the entire integrated system. They employed thermodynamic analysis and Computational Fluid Dynamics (CFD) simulations to predict the system's performance.

Datasets

Not discussed in the paper. The study relies on thermodynamic modeling and CFD simulations, with some experimental data cited for model verification.

Key Insights and Ideas

  • Synergistic Integration: The most significant insight is the powerful synergy achieved by coupling OTEC with Membrane Distillation. The waste heat from the OTEC process, which would otherwise be lost, becomes a valuable resource for desalination.
  • Enhanced Thermal Efficiency: The integration dramatically improves the thermal efficiency of the OTEC system, transforming it from a low-efficiency process into a much more viable energy generation method.
  • Compact Desalination: Using DCMD instead of traditional low-pressure flash evaporation significantly reduces the volume of desalination equipment, making it more suitable for offshore applications and space-constrained islands.
  • Dual Output Value: The system's ability to simultaneously produce both electricity and fresh water addresses two critical needs for tropical regions, enhancing its economic attractiveness.
  • Economic Viability Boost: The additional revenue from water sales can significantly improve the overall profitability of an OTEC plant, particularly in regions with high water prices.

Key Results

  • Thermal Efficiency Improvement: The thermal efficiency of the OTEC system was boosted from a baseline of 2.19% (pure OTEC) to 25.38% when coupled with the DCMD desalination unit.
  • Water Production Capacity: For a 100 kW OTEC power generation cycle, the system achieved a water production rate of approximately 58.874 tons per day.
  • Exergy Efficiency: While thermal efficiency saw a substantial increase, the exergy efficiency of the integrated system remained relatively stable, indicating that the energy conversion quality was maintained.
  • Economic Benefits: The economic analysis showed that the extra water production can improve the profit by nearly 20% in specific regions like Hawaii and Rainbow Beach, highlighting the economic advantage of the integrated approach.
  • Component Performance: The evaporator and condenser were identified as major sources of exergy destruction in the system. The "wet steam" working fluid state generally showed better performance in terms of exergy efficiency for the PGC.

Limitations and Future Work

  • Model Assumptions: The study relies on several assumptions for simplification, including ignoring heat loss, assuming steady-state operation, and treating liquids as incompressible. Real-world performance might deviate due to these factors.
  • Experimental Validation: While the DCMD model was verified against literature data, a full-scale experimental validation of the integrated OTEC-DCMD system is not presented.
  • Economic Factors: The economic analysis focused primarily on electricity and water sales. A comprehensive economic assessment would need to include capital costs, operational expenses, maintenance, and environmental impacts.
  • Future Work: The authors suggest that further research could explore optimizing the system for specific tropical island conditions, investigating different working fluids, and conducting detailed techno-economic analyses including capital and operational costs. The potential for further integration with other renewable energy sources or applications could also be explored.

Summary updated

Abstract

The ocean thermal energy conversion (OTEC) is a potential substitute for traditional power plants in tropical islands and coastal regions. However, the OTEC power generation cycle has low thermal efficiency and the integrated utilization is imperative, in which an OTEC coupled with seawater desalination is the most attractive option. Membrane distillation (MD) has distinct advantages making itself a competitive process for seawater desalination, especially the feature that the drained warm seawater from the OTEC power plant can be recycled, improving the integrated output of the OTEC system. In this study, an innovative OTEC system coupling a power generation sub-cycle (PGC) and a water production sub-cycle (WPC) was proposed, composed of the upstream organic Rankine cycle and the downstream membrane distillation modules. The mass, energy and exergy balance of the individual equipment, the sub-cycles and the whole system were performed by constructing the corresponding balance models. The thermal dynamic parameters were calculated, and the performance of power generation and water production was predicted. The results showed that by coupling with the MD desalination, the thermal efficiency of the OTEC system can be greatly improved from 2.19% to 25.38% while the exergy efficiency changed little. For a 100 kW OTEC power generation cycle, the water production rate approached 58.874 t/d. In addition, the economic analysis based on the electricity and water sale was carried out, and the profit can be improved by extra water production, especially in the Hawaii and Rainbow Beach by nearly 20%.
BibTeX
@inproceedings{ma2022novel,
  author = {Qingfen Ma and Yun Zheng and Hui Lu and Jingru Li and Shenghui Wang and Chengpeng Wang and Zhongye Wu and Yijun Shen and Xuejin Liu},
  title = {{A Novel Ocean Thermal Energy Driven System for Sustainable Power and Fresh Water Supply}},
  booktitle = {Membranes},
  year = {2022},
  doi = {10.3390/membranes12020160},
}
Figure