A Novel Method for Detecting the Two-Degrees-of-Freedom Angular Displacement of a Spherical Pair, Based on a Capacitive Sensor

Shengqi Yang, Yulei Xu, Yongsen Xu, Tianxiang Ma, Hao Wang, Jinghua Hou, Dachuan Liu, Honghai Shen2022 · DOI

TL;DR

This paper introduces a novel, integrated capacitive sensor designed to precisely measure the two-degrees-of-freedom (2-DOF) angular displacement of spherical pairs. This advancement is crucial for improving the performance and miniaturization of aviation optoelectronic pods by enabling more compact and stable inner frame structures.

What Problem Does This Paper Address?

Aviation optoelectronic pods rely on precise target tracking, often achieved through multi-axis rotation mechanisms. The "inner frame" of these systems requires stable, small-angle stabilization (around ±4°). Traditional orthogonal frame structures are bulky and limit the space available for optical imaging systems. Spherical pairs offer a more compact and agile alternative, but accurately measuring their 2-DOF angular displacement has been a significant challenge, hindering their widespread adoption. Existing methods, such as optical or magnetic sensors, suffer from complex setups, limited resolution, or difficulties in detecting subtle signal changes. This paper aims to bridge this gap by developing an integrated sensor solution that directly measures the spherical pair's angular motion.

Methods

The core of this research is a novel capacitive sensor design featuring a spherical differential four-quadrant setup. This design integrates electrodes directly into the spherical pair's ball head and socket.

  • Capacitive Sensor Design: The sensor comprises a spherical driving electrode divided into four quadrants and a concentric spherical sensing electrode. When the spherical pair rotates, the area overlap between the driving electrode quadrants and the sensing electrode changes, altering the capacitance. This differential capacitance change is used to infer angular displacement.
  • Mathematical Modeling: A mathematical model was developed to relate the differential output capacitances (AC13 and AC24) to the 2-DOF angular displacement components (α₁ and α₂). The model accounts for geometric parameters and the dielectric constant.
  • Signal Decoupling: A key challenge is that the angular displacement components (α₁ and α₂) are coupled in the capacitance signals. To address this, a signal processing circuit was designed. This circuit uses a multi-frequency excitation signal and a transconductance amplifier to convert the coupled capacitance signals into two distinct voltage signals, each corresponding to one DOF, allowing for independent measurement.
  • Simulation and Experimentation: The sensor's performance was validated through finite element simulations using Ansoft Maxwell software. An experimental setup, including a five-axis stage and a custom signal processing circuit, was built to test the prototype sensor.

Datasets

Not discussed in the paper. The study relies on simulation data generated from the designed model and experimental data collected from the prototype.

Key Insights and Ideas

  • Integrated Design: The most significant insight is the development of an integrated capacitive sensor that can be built directly into the spherical pair. This eliminates the need for external mounting and reduces errors associated with assembly and alignment.
  • Four-Quadrant Differential Measurement: The use of a four-quadrant differential setup is crucial for accurately measuring small angular displacements and potentially mitigating common-mode noise and edge effects.
  • Decoupling Strategy: The clever use of multi-frequency excitation signals in the signal processing circuit is essential for separating the coupled 2-DOF angular displacement signals, a critical step for accurate measurement.
  • Linearity and Sensitivity: The research demonstrates that the sensor exhibits an approximately linear output within the tested angular range, which is desirable for practical applications.

Key Results

  • Theoretical and Simulation Agreement: Simulation results closely matched the theoretical model, validating the mathematical framework.
  • Experimental Validation: Experimental measurements showed that the sensor's output capacitance was up to 89.7% of the theoretical value, indicating good performance.
  • Accuracy: The maximum measurement error for the angular displacement components was reduced to 0.17-0.28 pF after compensation, demonstrating the effectiveness of the decoupling and compensation techniques.
  • Noise Reduction: Compensation techniques were shown to effectively reduce the influence of common-mode noise on the measurement results.

Limitations and Future Work

  • Limited Angular Range: The study focuses on a small angular displacement range (±4°). While suitable for the inner frame of optoelectronic pods, extending this range might be necessary for other applications.
  • Environmental Factors: The paper does not extensively discuss the sensor's performance under varying environmental conditions (temperature, humidity, vibration), which are critical for aerospace applications.
  • Future Work: The authors suggest that the integrated structure is important for promoting the application of spherical pairs in aviation optoelectronic pods. Further work could focus on optimizing the sensor for specific environmental conditions and exploring its integration into larger systems. The successful demonstration of the mathematical model and experimental validation provides a strong foundation for future development and manufacturing of the hardware circuit.

Summary updated

BibTeX
@misc{yang2022novel,
  author = {Shengqi Yang and Yulei Xu and Yongsen Xu and Tianxiang Ma and Hao Wang and Jinghua Hou and Dachuan Liu and Honghai Shen},
  title = {{A Novel Method for Detecting the Two-Degrees-of-Freedom Angular Displacement of a Spherical Pair, Based on a Capacitive Sensor}},
  year = {2022},
  doi = {10.3390/s22093437},
}

Loading related content...

Figure