Abstract: Dendrochronology is an essential tool to determine the date and provenance of wood from historical art objects. As standard methods to access the tree rings are invasive, X-ray computed tomography (CT) has been proposed for non-invasive dendrochronological investigation. While traditional CT can provide clear images of the inner structure of wooden objects, it requires their full rotation, imposing strong limitations on the size of the object. In this paper, we use such a line-trajectory (LT) X-ray tomography technique to retrieve tree-ring patterns from large wooden objects. We demonstrate that by moving a wooden artifact sideways between the static X-ray source and the detector during acquisition, sharp reconstruction images of the tree rings can be produced. We validate this technique using computer simulations and two wooden test planks, and demonstrate it on a large iconic chest from the Rijksmuseum collection (Amsterdam, The Netherlands). The LT scanning method can be easily implemented in standard X-ray imaging units available at museum research facilities, representing a major step towards the standard implementation of non-invasive dendrochronology on large wooden cultural heritage objects.
Introduction
Dendrochronology, or tree-ring dating, is the gold standard for determining the age and provenance of wooden artifacts. However, traditional methods often require invasive sampling or abrasive surface cleaning to reveal tree rings. While X-ray Computed Tomography (CT) offers a non-invasive alternative, it typically requires the object to rotate 360 degrees. This poses a significant challenge for large cultural heritage items like massive chests, cabinets, or altarpieces, which cannot fit into standard scanners. This paper introduces a "Line Trajectory" (LT) X-ray tomography method that overcomes these size limitations by using linear movement instead of rotation.
Methodology: Line Trajectory Tomography
The core innovation of this research is the use of Line Trajectory (LT) X-ray tomography. Instead of rotating the artifact, the object is moved sideways on a linear path between a static X-ray source and a detector.
Exploiting Wood Anisotropy
Tree rings are curved surfaces that extend along the longitudinal axis of a tree. The researchers discovered that while a linear scan causes "smearing" in the 3D reconstruction along the source-detector axis, the slices perpendicular to this axis (the transverse sections) remain remarkably sharp. By aligning the wood's longitudinal axis roughly with the scanning direction, the method preserves the critical ring-width data.
Optimization and Reconstruction
To handle the large datasets generated by bulky objects, the team employed the Simultaneous Iterative Reconstruction Technique (SIRT). They further optimized the process by using "cuboid voxels"—voxels that are elongated in the direction of the wood grain. This reduces the total voxel count without compromising the resolution in the transverse plane where measurements are taken.
Experimental Validation and Results
The LT method was validated using computer simulations, small and large conifer test planks, and a significant historical artifact: the 17th-century "Hugo de Groot" book chest from the Rijksmuseum.
Key Findings
- High Accuracy: In controlled tests, the LT method achieved a "Gleichläufigkeit" (parallel variation) of over 80% and a Student’s t-value (TBP) exceeding 12. In dendrochronology, a TBP > 6 indicates a very strong match.
- Resolution: The system successfully resolved rings as narrow as 0.34 mm, making it suitable for slow-grown wood often found in high-quality art.
- Real-World Application: For the Hugo de Groot chest, the LT scan revealed 92 rings, surpassing the 88 rings visible through surface photography. This increased ring count is often crucial for definitive dating.
- Robustness: Simulations confirmed that the method is forgiving of slight misalignments (tilt) of the wood, provided the tilt is within the X-ray beam's cone angle (approx. 9°).
Discussion and Future Outlook
The LT scanning technique represents a major advancement for museum-based research. It can be implemented using existing X-ray hardware, such as C-arms, by adding a simple linear translation stage.
However, some limitations remain. The method struggles with high curvature near the "pith" (the tree's center), which can cause blurring. Additionally, very thick or dense objects (over 20-30 cm) may require higher energy X-ray sources. Future work will focus on automating the selection of the "best" reconstruction slices and the ring-counting process to streamline the workflow for dendrochronologists.
Conclusion
By moving from rotational to linear scanning, this research provides a practical, non-invasive solution for dating large wooden cultural heritage objects. The LT method balances high-resolution imaging with the logistical realities of handling bulky, fragile artifacts, paving the way for its standard implementation in museum research facilities.
Summary updated