A New Channel Model for OAM Wireless Communication at 5.8 and 28 GHz

Runyu Lyu, Wenchi Cheng, Muyao Wang, Qin Fan, Tony Q. S. QuekarXiv 2024 · DOI · arXiv

TL;DR

Researchers have developed a novel quasi-deterministic 3D channel model for Orbital Angular Momentum (OAM) wireless communications, supported by a custom-built 8-channel synchronized hardware system for the 28 GHz band. This work bridges the gap between theoretical OAM potential and practical 6G implementation by providing accurate, measurement-backed models for both sub-6 GHz and millimeter-wave frequencies.

What Problem Does This Paper Address?

As we look toward 6G, we need ways to squeeze more data into the same frequency bands. Orbital Angular Momentum (OAM) is a promising candidate. Unlike standard radio waves that use polarization (Spin Angular Momentum), OAM waves have a "twisted" spatial field distribution. Different "twists" (modes) are orthogonal, meaning they can theoretically carry independent data streams simultaneously without needing extra power or bandwidth.

However, OAM faces two major hurdles:

  1. Divergence and Crosstalk: OAM beams naturally spread out as they travel, and environmental reflections (multipath) can destroy their orthogonality, leading to massive interference between modes.
  2. Modeling Gaps: Most existing channel models are either too simple (statistical) or too computationally heavy (deterministic). Furthermore, measuring OAM at high frequencies like 28 GHz is notoriously difficult because you must keep multiple RF channels perfectly synchronized to maintain the "twist" of the beam.

Methods

The authors tackled these challenges through a combination of hardware innovation and mathematical modeling:

  • Hardware Development: They built a custom 8-channel OAM transmitting and receiving system operating at 28 GHz. The key innovation is the multi-channel synchronization, which ensures phase coherence across the antenna array—a prerequisite for generating "pure" OAM modes at millimeter-wave frequencies.
  • Measurement Scenarios: The team conducted extensive field measurements at 5.8 GHz and 28 GHz across three scenarios: Indoor Line-of-Sight (LOS), Through-wall Non-Line-of-Sight (NLOS), and Outdoor LOS.
  • The 3D-GBSM Model: They proposed a modified 3D Geometric-Based Stochastic Model (GBSM). This "quasi-deterministic" approach uses geometry to track main propagation paths while using stochastic (probabilistic) variables to account for random fading and shadowing. Crucially, they integrated Bessel functions into the model to accurately characterize OAM-specific beam gains and divergence.
  • SAGE Algorithm: They used the Space-Alternating Generalized Expectation-maximization (SAGE) algorithm to extract high-resolution multipath component (MPC) parameters from their raw measurement data.

Datasets

The paper does not use public datasets; instead, it introduces a new set of measurement data:

  • 5.8 GHz Data: Collected using a Vector Network Analyzer (VNA) and a four-mode OAM antenna array.
  • 28 GHz Data: Collected using their custom-built 8-channel synchronized sounder system.
  • Scenarios: Data includes path loss, delay spread, and angular spread for indoor corridors (up to 12m), through-wall penetrations (30cm concrete), and outdoor environments.

Key Insights and Ideas

  • The Synchronization Necessity: At 28 GHz, standard cables cause so much phase drift that OAM purity collapses. The authors' hybrid digital/analog compensation approach is essential for high-frequency OAM.
  • OAM vs. MIMO: While OAM excels in LOS by providing multiple orthogonal channels, it is highly sensitive to the environment. The study confirms that multipath effects are significantly more severe at 28 GHz than at 5.8 GHz, leading to more dispersed power and higher crosstalk.
  • Crosstalk is Ubiquitous: Even in "clean" LOS scenarios, significant crosstalk exists between OAM modes. This suggests that future OAM systems will require sophisticated signal processing (like MIMO-style precoding) rather than relying on pure physics alone.
  • Frequency Sensitivity: Walls attenuate 28 GHz OAM signals much more aggressively than 5.8 GHz signals, which was expected, but the model quantifies exactly how this impacts the "purity" of the OAM modes.

Key Results

  • Model Accuracy: The proposed 3D-GBSM closely matches the measured Cumulative Distribution Functions (CDFs) for delay spread and angular spread, proving its reliability for system simulations.
  • Spectral Efficiency: The study found that while 28 GHz offers more bandwidth, the normalized spectral efficiency (bps/Hz) is actually lower than at 5.8 GHz in similar scenarios due to higher attenuation and scattering.
  • Path Loss Formulas: The paper provides specific fitted path loss equations for OAM modes in different environments (see Table II in the paper), which are vital for link budget calculations in 6G planning.

Limitations and Future Work

  • Range Constraints: The measurements were conducted at relatively short ranges (up to 12 meters). Scaling OAM to long-distance outdoor macro-cells remains a challenge due to beam divergence.
  • Dynamic Environments: The current model is "quasi-deterministic" for static scenarios. Future work is needed to incorporate high-mobility users (e.g., vehicles or drones) where Doppler shifts might interact with OAM mode modulation.
  • Crosstalk Mitigation: The authors acknowledge that while they've modeled the crosstalk, solving it will require new research into OAM-specific precoding and channel equalization algorithms.

Summary updated

Abstract

Orbital angular momentum (OAM) in electromagnetic (EM) waves can significantly enhance spectrum efficiency in wireless communications without requiring additional power, time, or frequency resources. Different OAM modes in EM waves create orthogonal channels, thereby improving spectrum efficiency. Additionally, OAM waves can more easily maintain orthogonality in line-of-sight (LOS) transmissions, offering an advantage over multiple-input and multiple-output (MIMO) technology in LOS scenarios. However, challenges such as divergence and crosstalk hinder OAM's efficiency. Additionally, channel modeling for OAM transmissions is still limited. A reliable channel model with balanced accuracy and complexity is essential for further system analysis. In this paper, we present a quasi-deterministic channel model for OAM channels in the 5.8 GHz and 28 GHz bands based on measurement data. Accurate measurement, especially at high frequencies like millimeter bands, requires synchronized RF channels to maintain phase coherence and purity, which is a major challenge for OAM channel measurement. To address this, we developed an 8-channel OAM generation device at 28 GHz to ensure beam integrity. By measuring and modeling OAM channels at 5.8 GHz and 28 GHz with a modified 3D geometric-based stochastic model (GBSM), this study provides insights into OAM channel characteristics, aiding simulation-based analysis and system optimization.
BibTeX
@misc{lyu2024new,
  author = {Runyu Lyu and Wenchi Cheng and Muyao Wang and Qin Fan and Tony Q. S. Quek},
  title = {{A New Channel Model for OAM Wireless Communication at 5.8 and 28 GHz}},
  year = {2024},
  eprint = {2409.04113},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2409.04113},
}
Figure