A New Asynchronous RTK Method to Mitigate Base Station Observation Outages

Yuan Du, Guanwen Huang, Qin Zhang, Yang Gao, Yuting Gao2019 · DOI

TL;DR

This paper introduces a novel asynchronous Real-Time Kinematic (RTK) positioning method that significantly extends the duration of centimeter-level accuracy during base station outages. By effectively modeling and compensating for asynchronous ionospheric delays and residual errors, the method maintains positioning continuity for up to 15 minutes, a substantial improvement over existing techniques.

What Problem Does This Paper Address?

Real-Time Kinematic (RTK) positioning is a powerful technique for achieving centimeter-level accuracy in navigation and surveying. A critical component of RTK is the base station, which provides reference data to correct for spatially correlated errors affecting the rover receiver. However, base station observations can be interrupted due to communication failures or other environmental issues. These outages lead to a rapid decline in positioning accuracy for the rover. While existing methods can maintain accuracy for short periods (typically under 3 minutes), there's a clear need for solutions that can bridge longer gaps in base station data, especially in applications like landslide monitoring or construction where continuous operation is vital. This paper addresses this challenge by developing an asynchronous RTK method that can robustly handle extended base station outages.

Methods

The core of the proposed method lies in its approach to handling asynchronous errors that arise when base station data is unavailable. The authors build upon the classical RTK model by explicitly addressing and compensating for these errors.

Here's a breakdown of their approach:

  • Eliminating Satellite Clock and Orbital Errors: Instead of relying on broadcast ephemeris (as in some traditional ARTK methods), this new method utilizes precise ephemeris products (final precise ephemeris for post-processing, and ultra-rapid precise ephemeris for real-time processing) to eliminate these errors.
  • Tropospheric Error Correction: The Saastamoinen model is employed for tropospheric error correction.
  • Asynchronous Ionospheric Delay Correction: This is a key innovation. The method uses carrier phase measurements from the rover receiver to correct for asynchronous ionospheric delays. They analyze the behavior of ionospheric delay rates and demonstrate how it can be modeled.
  • Predicting Residual Asynchronous Error: A first-degree polynomial function is used to predict the remaining asynchronous residual error. This allows for a more accurate estimation of the error's trend over time.
  • Modified ARTK Strategy: The overall strategy involves running SRTK and ARTK in parallel when the base station is available. When the base station is interrupted, the ARTK component uses pre-sequence epoch values to generate asynchronous residual errors (AL and AI) which are then used to compensate for biases in the asynchronous model.

Datasets

The paper describes experiments using two types of datasets:

  • Simulated Dataset: A 2.5-hour dual-frequency BeiDou dataset was collected using UNICORECOMM-UR380 receivers. A static platform served as the base station, while a mobile platform simulated deformation. This dataset was used to validate the method under simulated 30-minute base station interruptions.
  • Real-World Dataset: Four datasets were collected from a landslide monitoring station in Gansu Province, China. These datasets involved dual-frequency BeiDou data with a 30-second sampling interval and short baselines ranging from 139m to 884m. This was used to test the method's performance with different baseline lengths and to verify significance testing of asynchronous errors.

No new benchmark datasets were introduced; rather, existing data collection setups were utilized for validation.

Key Insights and Ideas

  • The "Asynchronous Error" is the Villain: The paper clearly identifies that the core problem during base station outages isn't just missing data, but the asynchronous nature of the errors that remain when trying to process data from different times.
  • Ionospheric Delay is a Major Culprit: The authors dedicate significant effort to analyzing and correcting the ionospheric delay, recognizing its substantial impact on positioning accuracy, especially in asynchronous scenarios.
  • Polynomial Prediction is Sufficient: The finding that a simple first-degree polynomial can effectively predict the residual asynchronous error is a practical and elegant solution, avoiding overly complex modeling.
  • Centimeter-Level Accuracy is Achievable for Extended Periods: The most significant insight is that with proper modeling of asynchronous errors, centimeter-level accuracy can be maintained for much longer durations (up to 15 minutes) than previously thought possible.

Key Results

The proposed asynchronous RTK method demonstrated significant improvements in maintaining positioning accuracy during base station outages:

  • Extended Continuity: The method achieved centimeter-level accuracy for up to 15 minutes during base station interruptions, a substantial improvement over previous methods that typically lasted only 3 minutes.
  • Static Positioning: In static experiments, both post-processing (Scheme 2) and real-time (Scheme 3) scenarios maintained centimeter-level accuracy within 30 minutes of interruption. Scheme 2 (using final precise orbits) showed millimeter-level accuracy within 10 minutes.
  • Dynamic Positioning: For dynamic experiments, centimeter-level accuracy was achieved horizontally within 30 minutes and vertically within 18 minutes in post-processing. In real-time, vertical accuracy was maintained for approximately 15 minutes.
  • Baseline Lengths: Experiments with short baselines (up to 884m) confirmed that the method could maintain centimeter-level accuracy for a short period after interruption, with deviations becoming indistinguishable from actual displacement after 15 minutes.

Limitations and Future Work

The authors acknowledge the following limitations and suggest future research directions:

  • Incomplete Error Elimination: The method does not completely eliminate asynchronous errors. The remaining errors can still cause deviations in positioning results, which may gradually increase in magnitude over time.
  • Future Research: Future work will focus on improving positioning accuracy by conducting an in-depth study of the impact of asynchronous errors to overcome these remaining deviations. This suggests further refinement of the error modeling and prediction techniques.

Summary updated

BibTeX
@misc{du2019new,
  author = {Yuan Du and Guanwen Huang and Qin Zhang and Yang Gao and Yuting Gao},
  title = {{A New Asynchronous RTK Method to Mitigate Base Station Observation Outages}},
  year = {2019},
  doi = {10.3390/s19153376},
}

Loading related content...

Figure