A Microfluidic Prototype System towards Microalgae Cell Separation, Treatment and Viability Characterization

Yanjuan Wang, Junsheng Wang, Chen Zhou, Gege Ding, Mengmeng Chen, Jiang Zou, Ge Wang, Yuejun Kang, Xinxiang Pan2019 · DOI

TL;DR

This paper presents a novel microfluidic system that integrates microalgae cell separation, chemical treatment, and viability assessment. By combining deterministic lateral displacement (DLD) for size-based separation, a concentration gradient generator for optimized chemical treatment, and single-photon counting for fluorescence-based viability analysis, this system offers a compact, automated, and rapid solution for microalgae research and applications.

What Problem Does This Paper Address?

Microalgae are incredibly diverse and valuable organisms with applications spanning food, medicine, energy, and environmental protection. However, their effective utilization hinges on efficient methods for identifying, separating, and treating them. Traditional methods are often laborious, time-consuming, and lack precision, especially when dealing with specific species or optimizing treatment protocols. Furthermore, uncontrolled microalgae blooms, like red tides, pose significant environmental threats, and managing them requires effective detection and inactivation strategies, particularly in contexts like ship ballast water. This paper addresses the need for a streamlined, automated, and precise microfluidic platform that can tackle these challenges by enabling rapid separation of microalgae by size, optimizing chemical inactivation, and accurately assessing cell viability.

Methods

The core of this research is a custom-designed microfluidic chip integrating three key modules:

  • Microalgae Separation (DLD): This module utilizes Deterministic Lateral Displacement (DLD). DLD works by flowing a mixture of particles (in this case, microalgae of different sizes) through an array of precisely arranged micro-posts. Due to fluid dynamics and particle-post interactions, particles larger than a critical size are forced to drift laterally, while smaller particles follow the main flow. This allows for label-free, size-based separation. The critical size ($D_c$) is tunable by adjusting the geometry of the micro-post array (tilt angle, spacing) and flow conditions.
  • Chemical Treatment (Concentration Gradient Generator): To optimize the chemical inactivation of microalgae, a concentration gradient generator is employed. This module uses a network of microchannels to precisely mix a diluent (deionized water) with a stock solution (e.g., NaClO) at different ratios. This generates a range of controlled reagent concentrations, allowing for rapid screening of optimal treatment conditions without manual preparation of multiple solutions. The flow dynamics within the generator are modeled using an equivalent electric circuit analogy.
  • Viability Characterization (Single-Photon Counting): The viability of treated microalgae is assessed by measuring the intensity of laser-induced chlorophyll fluorescence. Chlorophyll emits fluorescence when excited by specific wavelengths. The intensity of this fluorescence is directly proportional to the amount of chlorophyll present, and thus, to the cell's metabolic activity and viability. A single-photon counter is used for highly sensitive detection of this fluorescence, providing quantitative data.

Datasets

The study used two species of microalgae: Pyramimonas sp. (larger, 10–15 µm diameter) and Chlorella (smaller, 3–5 µm diameter). These were obtained from the Liaoning Ocean and Fisheries Science Research Institute. The microalgae were cultured and prepared for analysis. No specific benchmark datasets were introduced; rather, the system was evaluated using these prepared microalgae samples.

Key Insights and Ideas

  • Integrated Workflow: The most significant contribution is the successful integration of separation, treatment, and analysis onto a single microfluidic platform. This streamlines the entire process, reducing manual handling and potential errors.
  • Tunable Separation: DLD's ability to separate particles based on size is crucial for microalgae, where size often correlates with species. The tunability of the DLD chip design allows for optimization for different microalgae species.
  • Automated Treatment Optimization: The concentration gradient generator is a powerful tool for quickly determining the optimal concentration of inactivating agents (like NaClO) and treatment time, avoiding laborious trial-and-error.
  • Sensitive Viability Assessment: Using fluorescence intensity measured by a single-photon counter offers a more accurate and reliable method for assessing microalgae viability compared to traditional microscopic observation, which is prone to subjective errors.
  • Ballast Water Management Potential: The system's ability to rapidly detect and potentially inactivate microalgae holds promise for applications like ship ballast water treatment, helping to prevent the spread of invasive species.

Key Results

  • Separation Efficiency: The system achieved separation efficiencies of over 80% for Pyramimonas sp. and over 85% for Chlorella when separating a mixed sample.
  • Throughput: The system demonstrated a maximum throughput of 200 µL/min.
  • Optimal Flow Rate Ratio: An optimal sheath flow rate to sample flow rate ratio of approximately 1/3 was identified for efficient separation of the tested species.
  • NaClO Inactivation: The study determined that Pyramimonas sp. required approximately 280 ppm NaClO for complete inactivation within 20 minutes, while Chlorella required a higher concentration of 500 ppm.
  • Fluorescence vs. Microscopy: The fluorescence-based viability assay showed significantly lower error ranges and better reliability compared to traditional microscopic analysis.

Limitations and Future Work

  • Species Specificity: While the system was tested with two species, further validation with a wider range of microalgae species is needed.
  • Inactivation Agent: The study focused on NaClO. Future work could explore the optimization of other inactivation agents or physical methods.
  • Real-World Ballast Water: Testing the system with actual ship ballast water samples, which contain complex mixtures of organisms and particulates, would be a crucial next step.
  • Integration with Other Detection Methods: While fluorescence is effective, integrating other detection modalities could provide more comprehensive analysis.
  • Scalability: While microfluidic systems are inherently miniaturized, scaling up the throughput for industrial applications might require further engineering.

Summary updated

BibTeX
@misc{wang2019microfluidic,
  author = {Yanjuan Wang and Junsheng Wang and Chen Zhou and Gege Ding and Mengmeng Chen and Jiang Zou and Ge Wang and Yuejun Kang and Xinxiang Pan},
  title = {{A Microfluidic Prototype System towards Microalgae Cell Separation, Treatment and Viability Characterization}},
  year = {2019},
  doi = {10.3390/s19224940},
}

Loading related content...

Figure