A Material–Structure Integrated Approach for Soft Rock Roadway Support: From Microscopic Modification to Macroscopic Stability

Sen Yang, Yi Xu, Feng Guo, Zhe Xiang, Hui ZhaoProcesses 2026 · DOI

TL;DR

This paper introduces a novel "material-structure" integrated approach to stabilize soft rock roadways, a persistent challenge in coal mining. By combining a high-performance grout with a tiered anchoring system, the method effectively seals micro-fractures and enhances the rock mass's structural integrity, leading to significantly reduced deformation and improved roadway stability.

What Problem Does This Paper Address?

Coal mining relies heavily on stable underground roadways. However, "soft rock" formations, common in regions like China's Longdong Mining Area, pose a significant challenge. These rocks are characterized by a high content of expansive clay minerals and numerous micro-fractures. When exposed to moisture, these clays swell, and the micro-fractures allow water ingress, leading to softening, strength degradation, and ultimately, large-scale deformation and roadway collapse. Conventional support methods often struggle to counteract these intrinsic material weaknesses and the resulting macroscopic instability, necessitating more advanced solutions.

Methods

The authors employed a multi-faceted approach:

  • Micro-mesoscopic Characterization: Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD) were used to analyze the microstructure and mineral composition of soft rock samples. This revealed the presence of micron-scale fractures and a high proportion of expansive clay minerals (kaolinite and illite).
  • Immersion-Disintegration Testing: Samples were subjected to water immersion to simulate humid underground conditions and observe their disintegration behavior, confirming the impact of water on rock strength.
  • Material Development: A high-performance grouting material was developed, incorporating redispersible latex powder (RPP) into a composite cement binder. RPP is crucial for enhancing interfacial bonding and creating a dense, self-stressing cementation within fractures.
  • Structural Design: A "tiered thick anchoring system" was designed. This system extends beyond the excavation-damaged zone (EDZ) to create a robust, deep load-bearing arch, providing continuous confinement to the shallow, grout-reinforced rock mass.
  • Theoretical Analysis: The synergistic mechanism between the material modification (grouting) and structural optimization (anchoring) was analyzed.
  • Field Testing and Monitoring: The integrated system was implemented in a 50m section of the 3205 Material Gateway. Comprehensive monitoring included roadway surface displacement, axial force in anchor cables, and borehole televiewer logging to assess fracture sealing and rock mass integrity.

Datasets

Not discussed in the paper. The study relies on samples collected from the 3205 Material Gateway in Xin'an Coal Mine for laboratory analysis and field testing.

Key Insights and Ideas

  • Water is the primary culprit: The study strongly emphasizes that water infiltration, exacerbated by expansive clay minerals and micro-fractures, is the fundamental driver of soft rock instability.
  • Micro-scale matters: Understanding the micron-scale fractures and mineralogy is critical for designing effective macroscopic support. Simply applying more robust anchors isn't enough if the rock itself is degrading.
  • Synergy is key: The "material-structure" integration is not just about using good materials and good structures independently, but about how they work together. The grout strengthens the rock at a micro-level, providing a better base for the macro-level anchoring system.
  • Active vs. Passive Support: The proposed system shifts from traditional "passive" support (resisting deformation) to "active" reinforcement (improving the rock's intrinsic properties and actively managing stress).
  • Self-stressing cementation: The RPP-modified grout creates a self-stressing effect, actively filling and sealing fractures while enhancing bond strength.

Key Results

  • Instability Mechanism: Identified micron-scale fractures (0.89–20.41 µm) and a high clay mineral content (kaolinite + illite = 58.1%) as the root cause of instability.
  • Grouting Effectiveness: Grouting effectively sealed fractures to depths of 1.71–3.92 m.
  • Reduced Deformation: In the experimental section, roof subsidence was reduced to ~10 mm, and rib convergence to ~52 mm. This represents a significant improvement (e.g., ~55% reduction in roof subsidence compared to conventionally supported sections).
  • Improved Axial Force Response: Anchor cables in the new system showed ideal load response, with rapid early engagement and sustained growth, indicating continuous load transfer.
  • Enhanced Rock Mass Integrity: Borehole televiewer logs confirmed effective grout penetration and cementation, with intact rock mass observed below ~2 m depth in the supported zones.

Limitations and Future Work

  • Localized Application: The study focused on a specific section of the 3205 Material Gateway. While the results are promising, further validation across different geological conditions and roadway geometries would be beneficial.
  • Construction Details: The paper notes that Stations #1 and #3 within the experimental section showed greater deformation, potentially due to local geological variations or construction implementation issues. This highlights the critical importance of precise installation quality.
  • Long-term Performance: While the material's chemical stability is discussed, long-term performance data under sustained stress and varying environmental conditions would further strengthen the findings.
  • Future Work: The authors suggest that this integrated approach provides a systematic and replicable solution, implying its potential for broader application in similar challenging soft rock environments. Further research could explore optimizing the grout composition and anchoring system parameters for even greater efficiency and cost-effectiveness.

Summary updated

Abstract

As a cornerstone of China’s energy infrastructure, the coal mining industry relies heavily on the stability of its underground roadways, where the support of soft rock formations presents a critical and persistent technological challenge. This challenge arises primarily from the high content of expansive clay minerals and well-developed micro-fractures within soft rock, which collectively undermine the effectiveness of conventional support methods. To address the soft rock control problem in China’s Longdong Mining Area, an integrated material–structure control approach is developed and validated in this study. Based on the engineering context of the 3205 material gateway in Xin’an Coal Mine, the research employs a combined methodology of micro-mesoscopic characterization (SEM, XRD), theoretical analysis, and field testing. The results identify the intrinsic instability mechanism, which stems from micron-scale fractures (0.89–20.41 μm) and a high clay mineral content (kaolinite and illite totaling 58.1%) that promote water infiltration, swelling, and strength degradation. In response, a novel synergistic technology was developed, featuring a high-performance grouting material modified with redispersible latex powder and a tiered thick anchoring system. This technology achieves microscale fracture sealing and self-stress cementation while constructing a continuous macroscopic load-bearing structure. Field verification confirms its superior performance: roof subsidence and rib convergence in the test section were reduced to approximately 10 mm and 52 mm, respectively, with grouting effectively sealing fractures to depths of 1.71–3.92 m, as validated by multi-parameter monitoring. By integrating microscale material modification with macroscale structural optimization, this study provides a systematic and replicable solution for enhancing the stability of soft rock roadways under demanding geo-environmental conditions. Soft rock roadways, due to their characteristics of being rich in expansive clay minerals and having well-developed microfractures, make traditional support difficult to ensure roadway stability, so there is an urgent need to develop new active control technologies. This paper takes the 3205 Material Drift in Xin’an Coal Mine as the engineering background and adopts an integrated method combining micro-mesoscopic experiments, theoretical analysis, and field tests. The soft rock instability mechanism is revealed through micro-mesoscopic experiments; a high-performance grouting material added with redispersible latex powder is developed, and a “material–structure” synergistic tiered thick anchoring reinforced load-bearing technology is proposed; the technical effectiveness is verified through roadway surface displacement monitoring, anchor cable axial force monitoring, and borehole televiewer. The study found that micron-scale fractures of 0.89–20.41 μm develop inside the soft rock, and the total content of kaolinite and illite reaches 58.1%, which is the intrinsic root cause of macroscopic instability. In the test area of the new support scheme, the roof subsidence is about 10 mm and the rib convergence is about 52 mm, which are significantly reduced compared with traditional support; grouting effectively seals rock mass fractures in the range of 1.71–3.92 m. This synergistic control technology achieves systematic control from micro-mesoscopic improvement to macroscopic stability by actively modifying the surrounding rock and optimizing the support structure, significantly improving the stability of soft rock roadways.
BibTeX
@inproceedings{yang2026materialstructure,
  author = {Sen Yang and Yi Xu and Feng Guo and Zhe Xiang and Hui Zhao},
  title = {{A Material–Structure Integrated Approach for Soft Rock Roadway Support: From Microscopic Modification to Macroscopic Stability}},
  booktitle = {Processes},
  year = {2026},
  doi = {10.3390/pr14030414},
}
Figure