Abstract
The availability of materials data for impact-mitigating materials has lagged behind applications-based data. For example, data describing on-field helmeted impacts are available, whereas material behaviors for the constituent impact-mitigating materials used in helmet designs lack open datasets. Here, we describe a new FAIR (findable, accessible, interoperable, reusable) data framework with structural and mechanical response data for one example elastic impact protection foam. The continuum-scale behavior of foams emerges from the interplay of polymer properties, internal gas, and geometric structure. This behavior is rate and temperature sensitive, therefore, describing structure-property characteristics requires data collected across several types of instruments. Data included are from structure imaging via micro-computed tomography, finite deformation mechanical measurements from universal test systems with full-field displacement and strain, and visco-thermo-elastic properties from dynamic mechanical analysis. These data facilitate modeling and design efforts in foam mechanics, e.g., homogenization, direct numerical simulation, or phenomenological fitting. The data framework is implemented using data services and software from the Materials Data Facility of the Center for Hierarchical Materials Design.
Introduction: The Data Gap in Impact Mitigation
While significant data exists regarding the performance of helmets during athletic impacts or accidents, there is a notable scarcity of open-access data concerning the constituent materials—specifically the elastomeric foams—that facilitate impact mitigation. Polymer foams are complex to model due to their multi-modal response, which is governed by the interaction between the polymer matrix, trapped gas, and intricate geometric structures.
These materials exhibit high sensitivity to both temperature and strain rate. Current data is often proprietary or restricted to standardized "single-point" tests that are insufficient for high-fidelity computational simulations. This research addresses this gap by introducing a standardized, FAIR (Findable, Accessible, Interoperable, Reusable) framework for sharing multi-modal foam data.
Experimental Methodology
The researchers developed a prototype framework using the Materials Data Facility (MDF) to characterize a vinyl-nitrile foam (VN01). The characterization relied on three experimental pillars:
- Micro-computed Tomography ((\mu)CT): Captured the 3D internal meso-structure. This included static high-resolution imaging and in-situ compression series to observe cell deformation under load.
- Universal Test System (UTS) with 2D Digital Image Correlation (DIC): Measured mechanical response across strain rates from (10^{-4}) s⁻¹ to (10^1) s⁻¹. DIC allowed for full-field displacement and strain mapping by tracking surface speckle patterns.
- Dynamic Mechanical Analysis (DMA): Evaluated viscoelastic properties from -35 °C to 60 °C. Time-Temperature Superposition (TTS) was employed to generate master curves predicting behavior across a wide frequency spectrum.
The VN01 Benchmark Dataset
The resulting dataset for VN01 (Impax VN600) provides a comprehensive resource for material modeling:
- Structural Data: Includes raw and binarized 3D (\mu)CT volumes and surface meshes (.stl/.vtk) suitable for finite element analysis.
- Mechanical Data: Provides stress-strain curves and full-field DIC displacement maps.
- Viscoelastic Data: Contains storage/loss moduli and Williams-Landel-Ferry (WLF) fit constants.
The data is hosted on the NIST Public Data Repository (PDR) and the MDF, accompanied by Jupyter notebooks to facilitate data extraction and analysis.
Key Insights and Results
The framework enables researchers to perform Direct Numerical Simulations (DNS) or micromechanical homogenization without replicating specialized experiments. A critical finding was the importance of the "low" threshold in hysteresis thresholding during image segmentation for accurate relative density calculations.
Key results include:
- Broad Rate Coverage: Data spans five orders of magnitude in strain rate.
- High Resolution: (\mu)CT scans achieved resolutions of 0.66 (\mu)m/voxel, capturing thin cell walls.
- Quantified Uncertainty: Validated DIC noise floors and established standard uncertainty values for stress (e.g., ±0.18 kPa for quasi-static loading).
- WLF Constants: Established constants ((C_1 \approx 42.9, C_2 \approx 257.7)) for modeling temperature dependence.
Limitations and Future Directions
While this framework currently focuses on a single vinyl-nitrile foam under uniaxial compression, it establishes a foundation for broader community contributions. Future work should expand to include other materials (e.g., EPP, EVA, or architected lattices) and diverse loading states such as shear, tension, and multiaxial loading. Additionally, integrating 3D DIC or Digital Volume Correlation (DVC) and accounting for internal gas dynamics during high-speed impacts will further enhance the fidelity of the data framework.
Summary updated