TL;DR
This paper presents a manta ray-inspired biosyncretic robot that uses cultured muscle tissue for propulsion. The key innovation is a dynamic electric stimulation system that precisely controls the electric field to align with the muscle tissue's actuation axis, enabling stable and controllable swimming. This work advances the field of biosyncretic robotics by offering a robust control strategy for bio-actuated soft robots.
What Problem Does This Paper Address?
The field of robotics is increasingly looking to nature for inspiration, leading to both bionic robots (mimicking form and function) and biosyncretic robots (incorporating biological materials). Biosyncretic robots, in particular, hold promise for miniaturization and enhanced performance due to the efficiency and capabilities of biological actuators. However, a significant challenge in developing these robots is achieving stable and precise control over their movement. Traditional methods of stimulating biological actuators, like muscle tissue, often struggle with issues like cell damage from high electric fields or instability caused by misaligned electric fields and muscle tissue axes during robot movement. This paper addresses the need for a more robust and controllable actuation and control method for biosyncretic robots, specifically focusing on a swimming application.
Methods
The researchers developed a manta ray-inspired biosyncretic swimmer. The core components include:
- Bionic Design: A manta ray-inspired skeleton structure made of polydimethylsiloxane (PDMS) and polyimide (PI) fins for propulsion.
- Biological Actuator: Cultured C2C12 muscle cells were differentiated into contractile myotubes within a 3D gel matrix. This tissue was engineered using a novel rotary electric stimulation method during culture to promote uniform myoblast differentiation and enhance contractility.
- Dynamic Electric Stimulation (CDME): A key innovation is the use of circularly distributed multiple electrodes (CDME) around the swimmer. This system allows for real-time control of the electric field's direction. By dynamically adjusting the potentials of these electrodes, the electric field can be precisely aligned parallel to the muscle tissue's actuation axis, regardless of the robot's movement. This eliminates instability caused by misaligned fields.
- Fabrication and Culture: Standard PDMS casting techniques were used for the robot skeleton. The muscle tissue fabrication involved injecting a cell-hydrogel mixture into a PDMS mold and culturing it under specific growth and differentiation media. Rotary electric stimulation was applied to induce myotube formation.
- Characterization: Atomic Force Microscopy (AFM) was used to measure the mechanical properties (Young's modulus) of the PDMS structure. The contractility of the muscle tissue was measured by observing the deformation of a PDMS measurement structure under electrical stimulation.
- Simulation: COMSOL Multiphysics software was used for simulating electric field distribution and fluid-solid coupling to predict robot swimming performance.
- Control Strategy: The CDME system was used to deliver electric pulses with adjustable amplitude and frequency. The direction of the electric field was dynamically controlled to remain parallel to the muscle tissue axis, enabling stable swimming.
Datasets
Not discussed in the paper. The study relies on experimental measurements and simulations rather than pre-existing datasets for training.
Key Insights and Ideas
- Precise Electric Field Control is Crucial: The most significant insight is that aligning the electric field with the muscle tissue's actuation axis is paramount for stable and controllable movement. The CDME system effectively achieves this, overcoming limitations of fixed electrode configurations.
- Rotary Electric Stimulation for Tissue Engineering: Using rotary electric stimulation during muscle tissue culture is a novel approach that promotes uniform myoblast differentiation, leading to more robust and effective biological actuators.
- Manta Ray Inspiration for Single-Actuator Propulsion: The manta ray's undulating fin motion provides an effective model for generating propulsion with a single muscle tissue actuator, simplifying the robot's design.
- Recruitment Phenomenon in Muscle Actuation: The observed saturation in muscle tissue contractility and robot swimming speed at higher stimulation amplitudes is attributed to the "recruitment phenomenon," where all available muscle fibers are activated.
Key Results
- Stable and Controllable Swimming: The biosyncretic swimmer demonstrated stable and controllable swimming by adjusting stimulation pulse direction, amplitude, and frequency.
- Muscle Tissue Contractility: The fabricated muscle tissue generated a maximal contractile force of 152.32 µN.
- PDMS Structure Properties: The Young's modulus of the PDMS structure was measured at 6.27 ± 0.82 MPa.
- Simulation vs. Experiment: While there were some discrepancies between simulation and experimental results, the overall trends in swimming speed with varying stimulation parameters were consistent.
- Turning Control: An asymmetric swimmer demonstrated controlled turning by manipulating the electric field direction, showcasing the system's versatility.
Limitations and Future Work
- Scale: The current swimmer is centimeter-level, which is too large for in vivo applications like drug delivery. Future work should focus on miniaturization using techniques like 3D printing.
- Autonomy: The current robot relies on external artificial stimulation. Future research should explore incorporating sensing and control mechanisms based on living cells to achieve autonomous motion in response to environmental cues.
- Error Factors: The authors acknowledge that manufacturing errors, measurement inaccuracies, and dynamic liquid disturbances contributed to discrepancies between simulation and experimental results. These factors need to be considered for further improvements.
- Tissue Engineering Advancements: Further exploration of tissue engineering techniques, particularly for creating more complex muscle structures with tendon-like elements, could enhance performance.
Summary updated