A Magnetostrictive Tactile Sensing Unit and the Integration of Sensor Array for Intelligent Manipulator

Bing Zhang, Bowen Wang, Ling Weng, Huaping LiuIEEE Access 2020 · DOI

Abstract

Researchers have developed a bio-inspired tactile sensing unit and integrated sensor array based on the inverse magnetostrictive effect. By mimicking the sensing process of human skin, the unit utilizes Galfenol wires and Hall sensors to detect mechanical stress. Theoretical modeling using electromagnetism and cantilever beam theory established the relationship between applied force and output voltage. Experimental results demonstrate a sensitivity of 127 mV/N, a resolution of 0.07 N, and a response time of 24 ms. With high reliability over 5,000 cycles and successful integration into a 2×2 array for force mapping, this technology shows significant potential for intelligent robotic manipulators.

The Challenge of Robotic Touch

For robots to interact safely and intelligently with their environment, they require a sophisticated sense of touch. While various tactile sensors—capacitive, piezoresistive, piezoelectric, and optical—currently exist, they often face trade-offs such as electromagnetic noise sensitivity, slow response times, or excessive bulk. This research aims to bridge this gap by creating a durable, fast, and sensitive sensing unit capable of high-resolution force mapping without magnetic interference between adjacent units.

Bio-inspired Design and Magnetostrictive Sensing

The sensing unit operates on the inverse magnetostrictive effect (Villari effect), where mechanical stress alters a material's magnetic properties. The team selected Galfenol (an iron-gallium alloy) for its high tensile strength and significant magnetostrictive properties.

Design and prototype of the magnetostrictive tactile sensing unit, showing the 3D model (a), physical prototype (b), and cross-sectional schematic (c).

The design mimics human skin's intermediate ridges using a contact pin and cantilever beam structure. When force is applied, the Galfenol wires bend, changing their magnetization. A Hall sensor detects this flux change, converting it into a voltage signal. The researchers combined electromagnetism theory with Euler-Bernoulli cantilever beam theory to precisely model the force-to-voltage relationship.

Experimental Validation

To evaluate performance, the authors developed a custom testing platform. This setup included a linear motor for cyclic force application and a high-precision quartz force sensor to provide ground-truth measurements.

The experimental platform used for performance testing, including the signal generator, power amplifier, and data acquisition system.

Data was collected over 5,000 loading/unloading cycles to ensure long-term mechanical and magnetic stability.

Performance and Optimization

  • Rapid Response: The sensor’s 24 ms response time outperforms the 30–50 ms typical of human skin, enabling rapid feedback loops for real-time manipulation.
  • Array Optimization: Using COMSOL Multiphysics simulations, the team determined that sensing units must be spaced at least 9 mm laterally and 17.5 mm vertically to prevent magnetic crosstalk.
  • Linearity: The theoretical model closely matched experimental results, confirming a predictable output across a 0 to 3 Newton range.

Experimental Outcomes

  • Sensitivity & Resolution: The unit achieved a sensitivity of 127 mV/N—notably higher than many piezoelectric alternatives—and a resolution of 0.07 N for detecting light touches.
  • Durability: No significant signal decay was observed after 5,000 cycles.
  • Practical Application: A 2×2 array integrated into a COHAND201 manipulator successfully mapped force distribution while gripping an apple, identifying peak pressures of up to 1.29 N on specific units.

Future Outlook

While promising, future work will focus on increasing array density and further miniaturizing the 9.5 x 6 x 6 mm units for integration into smaller robotic joints. Additionally, future "electronic skins" will need to incorporate temperature and texture sensing alongside force mapping for true environmental awareness.

Summary updated

BibTeX
@article{zhang2020magnetostrictive,
  author = {Bing Zhang and Bowen Wang and Ling Weng and Huaping Liu},
  title = {{A Magnetostrictive Tactile Sensing Unit and the Integration of Sensor Array for Intelligent Manipulator}},
  journal = {IEEE Access},
  year = {2020},
  doi = {10.1109/access.2020.3030659},
}
Figure