A Label-Free Fluorescent Amplification Strategy for High-Sensitive Detection of Pseudomonas aeruginosa based on Protective-EXPAR (p-EXPAR) and Catalytic Hairpin Assembly

Xuhui Huang, Ye Zhang, Jie Liu, D. Zhang, Li LiJournal of Microbiology and Biotechnology 2024 · DOI

This paper, published in the Journal of Microbiology and Biotechnology, describes a novel biosensing platform designed to detect Pseudomonas aeruginosa with high sensitivity and without the need for expensive fluorescent labels. By cascading two distinct DNA amplification techniques—Protective Exponential Amplification Reaction (p-EXPAR) and Catalytic Hairpin Assembly (CHA)—the researchers achieved a detection limit significantly lower than many current rapid tests.

TL;DR

Researchers developed a two-stage, label-free fluorescent biosensor for P. aeruginosa that combines competitive aptamer binding with a "protective" amplification cascade. This approach achieves a remarkable detection limit of 16 CFU/ml, offering a potential path toward rapid, high-sensitivity diagnostic tools for hospital-acquired infections.

What Problem Does This Paper Address?

Pseudomonas aeruginosa is a formidable opportunistic pathogen and a leading cause of nosocomial (hospital-acquired) infections. It is notorious for forming biofilms on medical devices and its resistance to many antibiotics.

The "gold standard" for detection remains microbial culture, which takes 3 to 7 days—far too slow for urgent clinical decisions. While PCR and ELISA are faster, they require expensive equipment, expert personnel, or costly fluorescently labeled probes. There is a critical need for a detection method that is simultaneously rapid, highly sensitive, and cost-effective. The authors specifically aimed to overcome the "background noise" (non-specific amplification) that often plagues standard isothermal amplification methods like EXPAR.

Methods

The sensing strategy relies on a sophisticated "molecular relay" consisting of four main phases:

  1. Target Recognition: Magnetic nanoparticles (MNPs) are functionalized with an aptamer (a DNA sequence that specifically binds P. aeruginosa). This aptamer is pre-hybridized with a short complementary DNA strand (labeled "2"). When the bacteria are present, they outcompete strand "2" for the aptamer, releasing strand "2" into the liquid.
  2. Protective-EXPAR (p-EXPAR): The released strand "2" acts as a trigger. It binds to a template DNA. Crucially, the authors used a "protective" strand ("3") to block the template from non-specific binding, ensuring that amplification only happens when the target is present. Through a cycle of polymerization and "nicking" (cutting one strand of DNA), a single trigger molecule leads to the exponential production of a new trigger sequence ("4").
  3. Catalytic Hairpin Assembly (CHA): Sequence "4" then enters the second amplification stage. It facilitates the assembly of two DNA hairpins (L1 and L2). This is a catalytic process; one molecule of "4" can cycle through and open many hairpins, releasing G-rich DNA segments.
  4. Signal Output: The released G-rich segments spontaneously fold into structures called G-quadruplexes. These structures bind to Thioflavin T (ThT), a "turn-on" fluorescent dye that only glows brightly when docked within the G-quadruplex.

Datasets

The study did not use large-scale computational datasets but rather experimental validation sets:

  • Standard Calibration: P. aeruginosa concentrations ranging from 50 to 10⁵ CFU/ml.
  • Specificity Panel: The sensor was tested against other common bacteria, including Staphylococcus aureus, Escherichia coli, and Staphylococcus epidermidis.
  • Clinical Simulation: The method was evaluated using spiked human serum and urine samples to test performance in complex biological environments.

Key Insights and Ideas

  • The "Protective" Advantage: Standard EXPAR is prone to "leakage," where the polymerase creates products even without the trigger. By introducing a protective strand that must be displaced by the target-released trigger, the researchers significantly suppressed background noise, enhancing the signal-to-noise ratio.
  • Dual-Stage Amplification: By chaining an exponential process (EXPAR) with a catalytic process (CHA), the system achieves a massive gain. This "double-stage" approach is what allows for the detection of very low bacterial counts (16 CFU/ml).
  • Label-Free Simplicity: Most fluorescent sensors require DNA strands to be chemically modified with fluorophores and quenchers. This system uses ThT, an environmentally sensitive dye that is added at the end, simplifying the manufacturing of the DNA probes and reducing costs.

Key Results

  • Sensitivity: The Limit of Detection (LOD) was calculated at 16 CFU/ml, which is highly competitive with PCR-based methods.
  • Linearity: The sensor showed a strong linear correlation ($R^2 = 0.988$) across a wide range of concentrations ($50$ to $10^5$ CFU/ml).
  • Selectivity: The signal for P. aeruginosa was at least five times stronger than the signal for any of the non-target bacteria tested, demonstrating high specificity.
  • Clinical Performance: In spiked serum and urine samples, the recovery rates were between 97.12% and 104.2%, suggesting the sensor is robust enough for real-world clinical samples.

Limitations and Future Work

While the method is highly sensitive, it still requires several incubation steps at specific temperatures (37°C for reaction, 80°C for enzyme deactivation, etc.), meaning it currently requires a laboratory setting.

The authors suggest that the next logical step is integrating this chemistry into portable microfluidic devices. Such a "lab-on-a-chip" would allow for true point-of-care testing at a patient's bedside. Additionally, while this paper focused on P. aeruginosa, the modular nature of the design means it could theoretically be adapted to detect any pathogen simply by swapping out the initial aptamer.

Summary updated

Abstract

This study presents a fluorescent mechanism for two-step amplification by combining two widely used techniques, exponential amplification reaction (EXPAR) and catalytic hairpin assembly (CHA). <i>Pseudomonas aeruginosa</i> (<i>P. aeruginosa</i>) engaged in competition with the complementary DNA in order to attach to the aptamer that had been fixed on the magnetic beads. The unbound complementary strand in the liquid above was utilized as a trigger sequence to initiate the protective-EXPAR (p-EXPAR) process, resulting in the generation of a substantial quantity of short single-stranded DNA (ssDNA). The amplified ssDNA can initiate the second CHA amplification process, resulting in the generation of many double-stranded DNA (dsDNA) products. The CHA reaction was initiated by the target/trigger DNA, resulting in the release of G-quadruplex sequences. These sequences have the ability to bond with the fluorescent amyloid dye thioflavin T (ThT), generating fluorescence signals. The method employed in this study demonstrated a detection limit of 16 CFU/ml and exhibited a strong linear correlation within the concentration range of 50 CFU/ml to 10<sup>5</sup> CFU/ml. This method of signal amplification has been effectively utilized to create a fluorescent sensing platform without the need for labels, enabling the detection of <i>P. aeruginosa</i> with high sensitivity.
BibTeX
@article{huang2024label,
  author = {Xuhui Huang and Ye Zhang and Jie Liu and D. Zhang and Li Li},
  title = {{A Label-Free Fluorescent Amplification Strategy for High-Sensitive Detection of <i>Pseudomonas aeruginosa</i> based on Protective-EXPAR (p-EXPAR) and Catalytic Hairpin Assembly}},
  journal = {Journal of Microbiology and Biotechnology},
  year = {2024},
  doi = {10.4014/jmb.2405.05006},
}
Figure