Abstract
Obtaining the heat production (HP) in the lithosphere has always been a challenge for the geotherms and evolution of continents. By transforming the nonlinear stable heat conduction equation into a linear Poisson's potential one, we propose a method to infer the HP in the stable continental lithosphere. This method estimates the HP through the inversion of the corresponding heat flow (HF) observations. Either the distribution of HP within the lithosphere or geometry of HP interfaces (even the both) can be inverted. Herein we focus on the inversion of the geometry of the HP interface. An analogical Parker-Oldenburg formula, which is often used in the inversion of potential field, is deduced for this purpose. When the mean depth of the HP interface and the HP contrast between the two media are given, one to three-dimensional geometry of the HP interface can be iteratively calculated. As a case study, we construct a HP model for the lithosphere of the Ordos geological block and its adjacent area in China, in which three-dimensional geometry of the upper crustal HP interface is estimated. It is found that the geometry of this HP interface distribute uneven in a magnitude of dozens of km. With this HP model, the geotherms for the Ordos geological block and its adjacent area is calculated further, which fit the constraints from the studies on the xenolith and tectonics well.
Introduction
Understanding the temperature profile of the Earth's crust, or the geotherm, is fundamental to geological sciences. A critical yet elusive variable in these calculations is Heat Production (HP), driven by the radioactive decay of elements like Uranium, Thorium, and Potassium. While surface HP can be measured directly, data from deeper than a few kilometers is virtually non-existent. Traditional models often rely on simple linear or exponential decreases with depth, which frequently fail to align with deep borehole observations. Without an accurate 3D distribution of HP, deep-earth temperature estimates remain speculative, limiting our understanding of continental evolution and tectonic stability.
Methodology
To address this, a novel geophysical inversion method is proposed. The core innovation lies in applying a Kirchhoff transform to convert the nonlinear steady-state heat conduction equation into a linear Poisson’s potential equation. This transformation allows the problem to be treated with the same mathematical tools used for gravity and magnetic fields.
Specifically, the author adapts the Parker-Oldenburg formula—a standard iterative algorithm for calculating underground density interfaces—to map the geometry of HP interfaces. By using surface heat flow data and an assumed average depth for a layer boundary (such as the upper-to-lower crust transition), the method can "invert" surface observations to reveal the 3D topography of that boundary.
As illustrated in the figure above, the complex layered model (a) can be decomposed into simpler components (b and c) that are mathematically easier to handle during the inversion process using the superposition principle.
Case Study: The Ordos Block
The method was validated using the Ordos geological block in China, a stable tectonic region. The study utilized surface heat flow (HF) data on a $1^\circ \times 1^\circ$ grid and Moho depth data from the CRUST1.0 global model. Validation was performed using Pressure-Temperature (P-T) estimates from Cenozoic xenoliths, which provide a "ground truth" for deep geotherms.
Results and Discussion
The inversion revealed that the interface between the high-HP upper crust and low-HP lower crust is highly irregular, varying in depth by dozens of kilometers. This "hidden topography" correlates strongly with surface heat flow: regions with higher surface heat flow typically correspond to a shallower HP-rich upper crustal layer.
The model demonstrated exceptional accuracy, with modeled heat flow matching observations within a relative error of less than 1% for most areas.
Furthermore, the inversion-based model provided a superior fit to xenolith P-T data compared to standard exponential models. At 100 km depth, the model predicted temperatures around 1200°C, aligning closely with mineralogical constraints. The method also successfully captured thermal signatures of active tectonic features like the Yinchuan-Jilantai and Shanxi grabens surrounding the Ordos block.
Conclusion and Future Outlook
This research demonstrates that surface heat flow data can be effectively inverted to map the internal "radiogenic engine" of stable continental plates. While currently limited to steady-state thermal environments, future developments could involve simultaneously inverting for both interface geometry and HP concentration. This approach provides a more robust framework for estimating deep-earth temperatures and understanding the structural evolution of the continental lithosphere.
Summary updated