A Generalized Gaussian Model for Wireless Communications

Khac–Hoang Ngo, Sheng Yang2021 · DOI

TL;DR

This paper introduces the Generalized Gaussian Model (GGM) to better represent complex wireless channels that exhibit nonlinearities and self-interference, going beyond traditional linear models. They propose methods for identifying these GGM channels from data, designing receivers for them, and analyzing their theoretical capacity limits, demonstrating its effectiveness on a phase-noise channel.

What Problem Does This Paper Address?

Modern wireless communication systems are increasingly complex, incorporating features like higher carrier frequencies, massive MIMO arrays, and imperfect hardware. These factors introduce nonlinearities and self-interference into the communication channel, which are not adequately captured by the standard linear Gaussian channel model ($y = Hx + z$). This traditional model, while mathematically tractable, leads to suboptimal performance when applied to these more realistic, complex channels. The paper aims to bridge this gap by proposing a more flexible model, the Generalized Gaussian Model (GGM), that can account for these phenomena while retaining some analytical tractability.

Methods

The authors tackle three core problems related to their proposed GGM:

  • Model Identification (Channel Estimation): They propose a data-driven approach to estimate the GGM parameters. This involves using a training sequence of known inputs and their corresponding outputs to fit the GGM. The method uses a maximum likelihood (ML) criterion, starting with a least-squares initialization and then employing gradient-based optimization.
  • Receiver Design: For an identified GGM, they investigate receiver design. This includes proposing several decoding metrics, such as the Maximum Likelihood (ML) detector, a non-linear Zero-Forcing (NLZF) approach, and a Self-Interference Whitening (SIW) algorithm. These methods aim to effectively decode the transmitted signal given the complex channel characteristics.
  • Capacity Analysis: The paper explores the theoretical limits of GGM channels. Since exact capacity is often hard to compute, they propose methods for deriving both lower bounds (using mismatched capacity) and upper bounds (using a duality approach).

Datasets

The paper uses simulated data for its experiments, specifically focusing on a 4x4 MIMO phase-noise channel. For model identification and receiver performance evaluation, they generate training sequences and test data based on this simulated channel. The input constellations used are M-QAM (specifically 256-QAM and 16-QAM). No new benchmark datasets are introduced; rather, the authors evaluate their methods on a simulated scenario representative of a challenging real-world channel.

Key Insights and Ideas

  • GGM's Flexibility: The core insight is that by allowing the mean and covariance of the output to depend on the input, the GGM can capture a much wider range of channel behaviors, including nonlinearities and self-interference, which are crucial for modern wireless systems.
  • Data-Driven Identification: The proposed ML-based model identification is a significant step towards practical deployment, as it allows the system to adapt to unknown or time-varying channel characteristics without relying on pre-defined, simplified models.
  • SIW Performance: The Self-Interference Whitening (SIW) detector shows promising results, performing close to optimal even under the identified GGM, suggesting that effective decoding is achievable for these complex channels.
  • Capacity Bounds as Achievable Rates: The work highlights how mismatched capacity and other bounds can serve as practical achievable rates for GGM channels, providing valuable performance benchmarks.

Key Results

The paper demonstrates the effectiveness of their proposed GGM and associated algorithms through numerical results on a simulated 4x4 MIMO phase-noise channel:

  • Model Identification: The identified GGM model accurately captures the statistical characteristics of the simulated phase-noise channel.
  • Receiver Performance: The SIW detector, when used with the identified GGM, achieves performance (in terms of vector error rate and achievable data rate) that is only slightly degraded compared to using a more accurate, but less practical, approximate model. It significantly outperforms traditional mismatched detectors (like mismatched ML and ZF) that ignore the phase noise.
  • Capacity Bounds: The proposed capacity bounds provide useful theoretical insights into the performance limits of these complex channels.

Limitations and Future Work

  • Model Complexity: While GGM is more flexible than linear models, it can still be an approximation. The paper mentions that fitting complex channels might require further extensions or refinements of the GGM.
  • Optimization Challenges: The model identification and receiver design problems can be non-convex, meaning the proposed algorithms aim for local optima rather than guaranteed global ones.
  • Computational Complexity: While efforts are made to provide efficient algorithms, complex channel identification and decoding can still be computationally intensive.
  • Future Work: The authors suggest exploring the GGM for other challenging channels, such as those with nonlinear power amplifiers or quantization noise. Further work is also planned for refining and evaluating the capacity upper bounds.

Summary updated

Abstract

We propose a class of parametric channel models that we call generalized Gaussian model (GGM). In particular, given the input, the output is Gaussian with both mean and covariance depending on the input. More general than the conventionallinear model, the GGM can capture nonlinearities and self-interference present in more and more wireless communication systems. We focus on three key problems. First, we propose a data-driven model identification algorithm that uses training data to fit the underlying channel with a GGM. This is a generalization of the conventional channel estimation procedure. Second, for an identified GGM, we investigate the receiver design problem and propose several detection metrics. Third, we are interested in the capacity bounds of the GGM. Both the mismatched lower bound and duality upper bound are proposed. Finally, we apply the GGM to fit the multiple-input multiple-output phase-noise channel. Numerical results show the near optimality of the model identification and detection algorithms.
BibTeX
@misc{ngo2021generalized,
  author = {Khac–Hoang Ngo and Sheng Yang},
  title = {{A Generalized Gaussian Model for Wireless Communications}},
  year = {2021},
  doi = {10.1109/isit45174.2021.9517759},
}
Figure