A Fully Electronic Time Reversal Mirror System Based on Temporal Imaging

Xiaoxiang Zhao, Shaoqiu Xiao, Ying SunIEEE Access 2019 · DOI

Abstract

A fully electronic time reversal mirror (TRM) system, which can make signal time reversal transformation, is proposed in this paper. The high-order asymmetric all-pass equalizer (APE) is proposed to provide a prescribed group delay for the TRM system. Finally, two APEs are designed to be used in a demonstrated TRM, which has a time duration of 10 ns and a bandwidth of 1 GHz.

Introduction

Time reversal (TR) is a sophisticated signal processing technique where an electromagnetic signal is recorded and retransmitted in reverse chronological order. This process exploits the time-reversal symmetry of wave equations, allowing waves to retrace their paths and focus precisely in both space and time. Such capabilities are invaluable for high-resolution medical imaging, subsurface sensing, and mitigating multi-path interference in wireless communications.

Historically, implementing TR at microwave frequencies has faced a significant trade-off. Digital systems rely on high-speed analog-to-digital and digital-to-analog converters, which are often costly and introduce latency that hinders real-time performance. Conversely, optical temporal imaging systems offer high speed but are bulky and difficult to integrate into compact electronic hardware. This research presents a "middle path": a fully electronic, analog TRM system capable of real-time operation using standard microwave components.

System Architecture and Temporal Imaging

The proposed system is based on the concept of Temporal Imaging (TI), which leverages the duality between the diffraction of light in space and the dispersion of pulses in time. Just as a conventional lens manipulates the phase of light to form a spatial image, a "time-lens" can manipulate the phase of a temporal signal.

Figure 1: Block diagram of the proposed electronic Time Reversal Mirror (TRM) system showing the arrangement of dispersion delay structures and the mixer.

As shown in the system diagram, the TRM consists of three primary stages:

  1. Former Dispersion Delay Structure (DDS): Provides initial dispersion to the input signal.
  2. Time-Lens (Mixer): The signal is mixed with a linear chirp pulse (LCP), $S(t)$, which imparts a quadratic phase shift.
  3. Latter Dispersion Delay Structure (DDS): Provides the final dispersion required to complete the temporal transformation.

By carefully matching the group delay slopes (GDS) of the DDS components with the chirp rate of the time-lens, the system can effectively "flip" the signal in time.

Innovation: Asymmetric All-Pass Equalizers (APE)

The critical challenge in this analog approach is achieving a perfectly linear group delay (LGD) over a wide bandwidth. Traditional symmetric equalizers often suffer from narrow operational windows. To overcome this, the authors developed a High-Order Asymmetric All-Pass Equalizer (APE).

Figure 2: (a) Circuit model of the reflection-type APE using circulators and resonators. (b) Group delay response showing how individual resonator peaks combine to form a linear slope.

The APE utilizes a series of resonators coupled via circulators. By employing an asymmetric design and optimizing the parameters using a Genetic Algorithm, the researchers achieved a highly linear group delay slope. This mathematical model was then realized physically using an H-plane-iris-coupled waveguide structure, ensuring low insertion loss and high power handling.

Experimental Results and Performance

The prototype TRM system was evaluated through both numerical simulations and physical measurements of the fabricated waveguide components. Key performance metrics include:

  • Bandwidth: 1 GHz.
  • Time Duration: 10 ns.
  • Fidelity: The system achieved a correlation coefficient of 0.912 between the ideal time-reversed signal and the actual output, indicating high transformation accuracy.
  • Group Delay Slope: The fabricated APEs provided a GDS of approximately 4.4 ns/GHz, aligning with the theoretical requirements for the TI equations.

Conclusion

This work demonstrates the feasibility of a fully electronic, analog Time Reversal Mirror. By replacing bulky optical fibers or slow digital processors with optimized waveguide-based asymmetric equalizers, the system achieves real-time signal reversal with high fidelity. Future developments may focus on miniaturizing these components for integration into standard PCBs and exploring tunable elements to allow for adjustable time-reversal windows.

Summary updated

Abstract

A fully electronic time reversal mirror (TRM) system, which can make signal time reversal transformation, is proposed in this paper. The high-order asymmetric all-pass equalizer (APE) is proposed to provide a prescribed group delay for the TRM system. Finally, two APEs are designed to be used in a demonstrated TRM, which has a time duration of 10 ns and a bandwidth of 1 GHz.
BibTeX
@inproceedings{zhao2019fully,
  author = {Xiaoxiang Zhao and Shaoqiu Xiao and Ying Sun},
  title = {{A Fully Electronic Time Reversal Mirror System Based on Temporal Imaging}},
  booktitle = {IEEE Access},
  year = {2019},
  doi = {10.1109/access.2019.2894763},
}

Loading related content...

Figure