A Facile Route To Modify Ferrous Phosphate and Its Use as an Iron-Containing Resource for LiFePO4 via a Polyol Process

Shaomin Li, Xichuan Liu, Rui Mi, Hao Liu, Yinchuan Li, Woon-min Lau, Jun MeiACS 2014 · DOI

Abstract

This study introduces an economical and environmentally friendly way of synthesizing LiFePO4/C to be used as cathode material in lithium ion batteries via two processes: (1) the synthesis of LiFePO4/C cathode material using a low cost divalent precursor ferrous phosphate, Fe3 (PO4)2·8H2O, as iron source in a polyol process and (2) the modification of the morphology of this precursor by varying the reaction time in a coprecipitation process. The study examines the effects of different structures and morphologies of the precursor on the structure and electrochemical performance of the as-synthesized LiFePO4/C. The LiFePO4/C shows an excellent rate capability and cycle performance, with initial discharge capacities of 153, 128, and 106 mA h g(-1) at 1 C, 5 C, and 10 C. The capacity retention is respectively 98.7%, 98.2%, and 98.7%, after 10 cycles at the corresponding rates. The capacity retention remains at 97% even after 300 cycles at the rate of 10 C. The outstanding electrochemical performance can be attributed to the improved rate of Li(+) diffusion and the excellent crystallinity of synthesized LiFePO4/C powders through the modified precursor. Therefore, this is an economical and environmentally friendly way of synthesizing LiFePO4/C to be used as cathode material in lithium ion batteries.
BibTeX
@inproceedings{li2014facile,
  author = {Shaomin Li and Xichuan Liu and Rui Mi and Hao Liu and Yinchuan Li and Woon-min Lau and Jun Mei},
  title = {{A Facile Route To Modify Ferrous Phosphate and Its Use as an Iron-Containing Resource for LiFePO<sub>4</sub> via a Polyol Process}},
  booktitle = {ACS},
  year = {2014},
  doi = {10.1021/am501762x},
}

Loading related content...

Figure