Abstract
Aiming at the problem that traditional 3D CAD model editing often changes the topology information of models and relies on modeling feature information, this paper proposes a direct modeling method for CAD models that preserves columnar body features. This method builds columnar body features based on boundary representation (B-Rep), propagates editing operations within the columnar body features, and modifies associated geometric elements while maintaining the topology. The method mainly includes defining a columnar body feature based on B-Rep, which maps direct modeling operations for points, edges, and faces to editing the surface elements of the feature; providing a constraint propagation algorithm for columnar body features, which determines the effectiveness of editing operations through constraint solving and meets user intent. Based on the open source CAD engine Open CASCADE (OCC), an experimental verification is conducted on hexagonal frustums, circuit board models, etc., which proves the effectiveness of the method.
Introduction
In the field of 3D CAD, designers often face a trade-off between the intelligence of Feature-Based Modeling and the flexibility of Direct Modeling. While feature-based systems (like SolidWorks) maintain design intent, they are often rigid and fail when processing neutral files (e.g., STEP) that lack modeling history. Direct modeling allows for intuitive manipulation of geometry but is typically "dumb," often leading to collapsed geometry or lost structural integrity when individual vertices or edges are moved. This research introduces a method to bridge this gap by focusing on columnar features, enabling flexible direct editing while automatically preserving the model's underlying structural logic.
Methodology
Defining Columnar Features
The proposed framework identifies "Single Columnar Features" within a model's Boundary Representation (B-Rep). A columnar body is defined as a volume bounded by two base faces and a series of side faces. By establishing this semantic layer over the raw geometry, the system can understand which elements belong to a unified structural component.
Constraint Propagation and Topology Protection
When a user edits a vertex or edge, the system does not treat the movement in isolation. Instead, a constraint propagation algorithm calculates how the change should affect connected elements to maintain the "column-ness" of the feature. This is achieved through a "three-plane intersection" strategy to solve for new vertex positions.
To ensure the physical validity of the model, the system performs topology protection. It checks for "topology flipping"—where faces might cross or invert—and rejects edits that would break the model's integrity. This ensures that the resulting geometry remains valid for downstream engineering tasks.
Key Insights and Results
- Granular Control: Unlike most commercial tools that only support face-level direct modeling, this method allows for stable, intent-preserving edits at the vertex and edge levels.
- Anchor Point Strategy: The algorithm automatically identifies fixed "anchors" far from the edit site, ensuring that deformations are predictable and do not cause unintended global skewing.
- High Performance: In stress tests involving gear models with up to 120 columns, the solver completed 1,000 iterations in under 300ms, confirming its suitability for real-time, interactive design environments.
- Software Agnosticism: Because the method operates directly on B-Rep data, it can be applied to models imported from any CAD software without requiring original modeling history.
Conclusion
This direct modeling approach successfully preserves columnar features while offering the flexibility of low-level geometric manipulation. By integrating constraint propagation with B-Rep data, the method maintains design intent and topological validity. Future work will focus on extending these capabilities to non-planar surfaces and more complex intersection boundaries.
Reference: Hao, L., Xu, Y., et al. (2023). A Direct Modeling Method for 3D CAD Models Preserving Columnar Features. Journal of Computer-Aided Design & Computer Graphics, 35(12).
Summary updated