A digital SIW-slot antenna array with FPGA implementation of beamforming

Haitao Li, Shanshan Li, Bo Hou, Xianli Zhang, Weijia Wen, Chuandeng HuScientific 2022 · DOI

TL;DR

This paper presents a novel digital Substrate Integrated Waveguide (SIW)-slot antenna array that uses PIN diodes and an FPGA for electronically steerable beamforming. This approach offers a low-cost, lightweight, and programmable alternative to traditional phased arrays for applications like satellite communication and 5G.

What Problem Does This Paper Address?

Traditional phased arrays, while capable of beam steering, are often bulky, expensive, and complex due to the need for phase shifters and T/R modules. This makes them less suitable for mass-market applications. Electronically reconfigurable reflectarrays and dynamic metasurface antennas (DMAs) have emerged as alternatives, but some still face integration challenges or suffer from low radiation efficiency. The authors aim to address the need for a cost-effective, lightweight, and electronically steerable antenna with good radiation efficiency by proposing a digital SIW-slot antenna array.

Methods

The core of the proposed antenna is the SIW-slot antenna element. This element utilizes a Substrate Integrated Waveguide (SIW) structure, which confines microwave signals within the substrate using metallic covers and through-hole sidewalls. Radiation occurs through slots opened in the metallic covers. To achieve electronic steerability, PIN diodes are integrated across the gaps of the slot antenna pads. By switching these diodes between "on" and "off" states (radiating and non-radiating), the radiation pattern of individual elements can be controlled.

To prevent RF energy leakage into the biasing circuitry, radial decoupling stubs are incorporated into the bias lines. The array itself is formed by an 8x4 arrangement of these SIW-slot elements, fed by SIW power dividers. A Field-Programmable Gate Array (FPGA) is used to digitally control the bias states of the PIN diodes, enabling programmable beamforming. The design process involved optimizing the SIW structure, the slot element dimensions, and the decoupling stubs.

Datasets

Not discussed in the paper. The paper focuses on the design, simulation, fabrication, and measurement of a specific antenna prototype.

Key Insights and Ideas

  • Digital Beamforming with PIN Diodes: The use of PIN diodes to switch SIW-slot elements between radiating and non-radiating states offers a digital approach to beamforming, bypassing the need for complex analog phase shifters.
  • SIW for Integration and Miniaturization: The SIW technology provides a low-profile and integrated waveguide solution, contributing to the antenna's compact size and lightweight nature.
  • Decoupling Stubs for Isolation: The radial decoupling stubs are crucial for maintaining the integrity of the RF signal by preventing leakage into the DC biasing circuitry, which is essential for reliable operation.
  • FPGA for Programmability: The integration of an FPGA provides a flexible and programming-friendly interface for controlling the antenna's beamforming capabilities, opening doors for smart antenna applications.
  • Trade-offs in Array Design: The paper highlights the trade-offs between array size, complexity, and performance, suggesting that larger arrays could further improve beamforming capabilities.

Key Results

  • Simulated Performance: The designed 8x4 SIW-slot antenna array achieved a simulated maximum gain of 15 dBi and a radiation efficiency of 53.5% at the operating frequency of approximately 5.8 GHz.
  • Reconfigurable Radiation Patterns: The array demonstrated the ability to synthesize various radiation patterns by applying different on/off states to the PIN diodes, effectively achieving beam scanning.
  • Fabrication and Measurement: A prototype was fabricated and measured, showing good agreement with simulated results, validating the reconfigurable characteristics of the antenna.
  • Size and Weight Advantage: The antenna boasts a compact size (145 mm x 120 mm x 1.524 mm) and is lightweight, making it suitable for space-constrained applications.

Limitations and Future Work

  • Limited Measurement States: While the paper demonstrates beam steering with several on/off sequences, the full potential of arbitrary beam synthesis was not exhaustively measured. The authors suggest that applying Discrete Dipole Approximation (DDA) methods to larger arrays could enable more complex and directive beam patterns.
  • Discrepancies in Center Frequency: Some discrepancies between simulated and measured center frequencies were observed, attributed to the complex equivalent circuit models of the diodes and uncertainties introduced during fabrication and assembly.
  • Potential for Improvement: The authors acknowledge that the antenna's performance could be further improved by optimizing the array size and design. Future work could focus on implementing larger arrays and exploring advanced beamforming algorithms for more sophisticated pattern synthesis.

Summary updated

Abstract

The future satellite platform and 5G communication systems place high demands on antennas, in which the antenna should offer low-cost, lightweight, electronically steerable features. In this paper, the design of a digital slot antenna element based on substrate integrated waveguide (SIW) is proposed. SIW guides the microwave inside the substrate confined with planar metallic covers and through-hole synthetized side-walls in conventional applications, and can also radiate the microwave towards free space in antenna applications through opening slots in its metallic covers. The slot antenna element is realized by implementing PIN diodes across the gaps on both sides of the pad in the center of the slot antenna, to provide the switching freedom of the slot antenna element between radiating and non-radiating states. Besides, radial decoupling stubs are introduced into the bias line so as to reduce the leakage of the energy in the SIW structure. Applying a series of on/off states to the diodes produces various radiation patterns, thus wide range scanning is possible supposing that enough array elements are equipped. Finally, a digital SIW-slot array composed of 8 by 4 elements with tunable field programmable gate array circuits are fabricated and measured. The measured results validate the reconfigurable characteristics for the radiation pattern of the proposed digital SIW-slot antenna array without heavy engineering of phase shifter in conventional antenna arrays. The antenna is consisted by 4 by 8 elements and its dimension, simulated gain and radiation efficiency are 145 mm [Formula: see text] 127 mm [Formula: see text] 1.524 mm, 15 dBi and 53.5%, respectively. Our designed SIW antenna has the advantage of both size and weight. Furthermore, its digitalized control of beamforming allows a programming-friendly interface for smart antenna development.
BibTeX
@inproceedings{li2022digital,
  author = {Haitao Li and Shanshan Li and Bo Hou and Xianli Zhang and Weijia Wen and Chuandeng Hu},
  title = {{A digital SIW-slot antenna array with FPGA implementation of beamforming}},
  booktitle = {Scientific},
  year = {2022},
  doi = {10.1038/s41598-022-12804-2},
}
Figure