A Continuum Multi-Disconnection-Mode model for grain boundary migration

Chaozhen Wei, Spencer L. Thomas, Jian Han, David J. Srolovitz, Yang XiangJournal of the Mechanics and Physics of Solids 2019 · DOI · arXiv

Introduction

The mechanical and thermal properties of polycrystalline materials are largely governed by the behavior of grain boundaries (GBs). These interfaces are not static; they migrate and evolve, influencing strength, stability, and conductivity. Traditional models often treat GB migration as a simple curvature-driven process. However, experimental evidence suggests that GB motion is frequently "shear-coupled," where migration is intrinsically linked to the sideways sliding of adjacent grains. Existing continuum models often fail to explain why this coupling varies with temperature or why boundaries in constrained environments often stagnate. This paper introduces a new continuum model that incorporates multiple "disconnection modes" to address these complexities.

Methods: The Multi-Disconnection-Mode Model

The authors propose a Continuum Multi-Disconnection-Mode Model that treats the GB not as a smooth surface, but as a collection of line defects known as disconnections. Each disconnection mode $i$ is defined by a Burgers vector $b_i$ (representing shear) and a step height $H_i$ (representing migration).

Schematic of the continuum grain boundary model showing disconnection line defects with step height H and velocity $v_d$.

The model tracks the GB height $h(x,t)$ and the density of each disconnection mode $\rho_i$ through a set of kinetic partial differential equations. The density of these defects is determined by thermally-activated nucleation, following an Arrhenius relationship based on formation energy and temperature $T$. To account for physical constraints, such as those found in real polycrystals, the model integrates elasticity using Airy stress functions to calculate image stresses.

Key Insights and Results

The central finding is that the competition between different disconnection modes determines the macroscopic behavior of the grain boundary.

Temperature-Dependent Mode Activation

At low temperatures, only the lowest-energy disconnection mode is active. In constrained systems, the shear associated with this single mode generates a "back-stress" that leads to stagnation. As temperature increases, secondary disconnection modes with higher formation energies become active. These modes can effectively "unshear" the stress produced by the primary mode, allowing for continued migration even under tight constraints.

Energy levels and relative concentrations of different disconnection modes for $\Sigma 13$ and $\Sigma 37$ grain boundaries across various temperatures.

Unified View of Migration and Sliding

This multi-mode approach provides a unified framework where "pure migration" and "pure sliding" are seen as special cases where multiple modes cancel out each other's shear or step components, respectively. The model successfully predicts that the shear-coupling factor $\beta$ is not a fixed property but evolves with time and temperature.

Conclusion

The Continuum Multi-Disconnection-Mode Model offers a robust framework for understanding the complex dynamics of grain boundary migration. By accounting for multiple defect modes and their thermal activation, it explains phenomena like temperature-induced transitions from stagnation to steady-state motion. Future work will aim to refine the nucleation models and incorporate the dynamics of triple junctions to better simulate real-world polycrystalline evolution.

Summary updated

BibTeX
@article{wei2019continuum,
  author = {Chaozhen Wei and Spencer L. Thomas and Jian Han and David J. Srolovitz and Yang Xiang},
  title = {{A Continuum Multi-Disconnection-Mode model for grain boundary migration}},
  journal = {Journal of the Mechanics and Physics of Solids},
  year = {2019},
  doi = {10.1016/j.jmps.2019.103731},
}
Figure