A Comparison Study of the Blood Component Quality of Whole Blood Held Overnight at 4°C or Room Temperature

Shichun Wang, Tiantian Wang, Yahan Fan, Shan Huang, Zhongmei Yi, Ruiqing Li, Shuming ZhaoJournal of Blood Transfusion 2013 · DOI

TL;DR

This study investigates the optimal storage conditions for whole blood (WB) to maximize the quality of its derived components, plasma and platelets. The findings suggest that storing WB overnight at 4°C is best for plasma production, while room temperature storage is preferable for platelet concentrates, offering practical benefits for blood banking operations.

What Problem Does This Paper Address?

Blood centers worldwide face challenges in meeting the demand for blood components, often exacerbated by the need for rapid processing of collected whole blood (WB). Current regulations often mandate processing within a few hours of collection, which can be logistically difficult, especially for mobile blood drives. This study addresses the question of whether holding WB overnight at different temperatures (4°C or room temperature) before component separation impacts the quality of the resulting plasma and platelet concentrates (PCs). Specifically, it aims to determine if these "overnight hold" strategies can maintain component quality while offering operational advantages.

Methods

The researchers collected 400 mL WB units from healthy volunteers. These units were then divided and subjected to different overnight storage conditions: 4°C or room temperature (20-24°C).

For plasma production, WB was either processed within 6 hours (as a control, Fresh Frozen Plasma - FFP) or held overnight at 4°C before processing within 24 hours. Two variations of overnight 4°C processing were tested: leukodepletion before holding (I-FP24) and leukodepletion after holding (II-FP24).

For platelet concentrate (PC) production, WB was either processed within 6 hours from fresh blood (PC1) or held overnight at room temperature before processing from the buffy coat (PC2).

The quality of the resulting plasma was assessed by measuring key coagulation factors (FV, FVII, FVIII, Fib) and biochemical parameters (pH, Na+, K+, Cl-, LDH, GLU, FHb). PC quality was evaluated by measuring platelet count, pH, pCO2, pO2, Na+, K+, Cl-, GLU, Lac, CD62P expression (a marker of platelet activation), adhesion, hypotonic shock response (HSR), and bacterial contamination. Standard laboratory techniques, including automated analyzers and flow cytometry, were employed. Statistical analysis involved t-tests and ANOVA to compare groups.

Datasets

Not discussed in the paper. The study utilized WB samples collected from normal volunteer donors.

Key Insights and Ideas

  • Temperature is Key for Component Type: The study highlights that the optimal storage temperature for overnight holding is component-specific. 4°C is beneficial for plasma, while room temperature is better for platelets.
  • Plasma Quality Trade-offs: While overnight storage at 4°C for plasma production leads to some decrease in crucial factors like FVIII, the overall quality remains acceptable for most clinical applications, offering significant logistical benefits.
  • Platelet Activation Concerns: Storing WB at room temperature overnight for PC production appears to increase platelet activation (indicated by CD62P expression) and alter biochemical parameters, but the overall platelet count and viability remain high.
  • Operational Efficiency vs. Strict Adherence: The findings suggest that adopting overnight holding protocols can streamline blood processing, reducing the pressure for immediate component separation, without compromising essential component quality for many patient needs.

Key Results

  • Plasma:
    • Compared to FFP, I-FP24 and II-FP24 showed significant decreases in FVII and FVIII levels.
  • II-FP24 also exhibited significant differences in pH, Na+, LDH, and FHb compared to FFP.
  • Plasma from WB held overnight at room temperature (P24) had higher Na+, K+, and FHb, and lower Cl-, pH, and FVIII compared to plasma processed within 6 hours (P6).
  • The study concluded that FP24 is best prepared from WB stored overnight at 4°C, followed by leukodepletion and separation within 24 hours.
  • Platelets:
    • PC2 (from overnight room temperature held WB) had a significantly higher PLT count (25.54% higher than PC1 and 74.50% higher than the acceptance level).
  • PC2 showed lower pH, pO2, and Na+ levels, and increased pCO2, K+, Lac, and CD62P expression compared to PC1.
  • The study concluded that PCs are best produced from buffy coats derived from WB held overnight at room temperature.

Limitations and Future Work

  • FVIII Loss: The study acknowledges the significant loss of FVIII in plasma processed after overnight holding, suggesting that this might necessitate the use of biological FVIII products for patients requiring it.
  • Platelet Activation Markers: While PC2 showed higher PLT counts, the increased CD62P expression indicates a higher level of platelet activation. Further research could explore strategies to mitigate this.
  • Red Blood Cell (RBC) Quality: The study primarily focused on plasma and platelets. While the abstract mentions that PCs are produced from buffy coats derived from WB, the quality of the corresponding RBCs under these different storage conditions was not detailed in the provided text. Future work could investigate the impact of these overnight holding protocols on RBC quality and viability.
  • Longer Storage: The study focused on overnight holding. Further investigations into longer storage periods for WB before component processing could offer additional operational flexibility.

Summary updated

Abstract

Background. The use of plasma frozen within 24 hrs is likely to increase. Whole blood (WB) and buffy coats (BCs) can be held for a few hrs or overnight before processing. Methods. Twenty-four bags of WB for plasma and 12 bags for platelet (PLT) concentrates were collected. The fresh frozen plasma (FFP) was prepared within 6 hrs. I-FP24 and II-FP24 samples were prepared either from leukodepleted WB that was held overnight or from WB that was held overnight before leukodepletion. The PLT concentrates (PCs) were prepared from BCs within 6 hrs (PC1) and within 18 to 24 hrs (PC2). The typical coagulation factors and some biochemical parameters were determined. Results. Compared to the FFP samples, the levels of FVII and FVIII in the I-FP24 and II-FP24 samples decreased significantly. The pH, Na(+), LDH, and FHb levels differed significantly between II-FP24 and FFP. Compared to PC1, PC2 exhibited lower pH, pO2, and Na(+) levels, a higher PLT count, and increased pCO2, K(+), Lac, and CD62P expression levels. Conclusion. FP24 is best prepared from WB that was stored overnight at 4°C and then leukodepleted and separated within 24 hrs. PCs are best produced from BCs derived from WB that was held overnight at room temperature.
BibTeX
@article{wang2013comparison,
  author = {Shichun Wang and Tiantian Wang and Yahan Fan and Shan Huang and Zhongmei Yi and Ruiqing Li and Shuming Zhao},
  title = {{A Comparison Study of the Blood Component Quality of Whole Blood Held Overnight at 4<b>°</b>C or Room Temperature}},
  journal = {Journal of Blood Transfusion},
  year = {2013},
  doi = {10.1155/2013/523539},
}

Loading related content...

Figure