Abstract
The signals generated by electromagnetic flow sensors used for slurry fluids are often affected by noise interference produced by interaction with the slurry itself. In this study, the power spectrum characteristics of the signal are studied, and an attempt is made to determine the relationship between the characteristics of the related noise and the velocity and concentration of the slurry fluid. Dedicated experiments are conducted and the related power spectrum curve is obtained processing the signal measured by the sensor with Matlab. Numerical simulations are also carried out in the frame of an Eulerian approach in order get additional insights into the considered problem through comparison with the experimental results. The following conclusions are drawn: (1) The intensity of noise is directly proportional to the number of solid particles colliding with the electrode of the electromagnetic flow sensor per unit time, and to the square of the average velocity of the flow layer near the pipe wall. (2) With an increase in the slurry noise intensity, the power spectrum curve shifts upward in the logarithmic coordinate system.
Introduction
Electromagnetic flow sensors (EMFs) are widely utilized in industrial settings due to their non-intrusive nature and high accuracy. However, their performance degrades significantly when measuring slurries—fluids containing solid particles such as iron ore, coal, or pulp. The resulting "slurry noise" makes the output signal erratic and difficult to interpret. This study, published in Fluid Dynamics & Materials Processing, investigates the mathematical characteristics of this noise to improve sensor design and signal processing.
The Mechanism of Slurry Noise
Slurry noise arises from the physical interaction between solid particles and the sensor's electrodes. As particles strike the electrode, they scratch the protective oxide film. The rapid destruction and subsequent reformation of this film generate sudden spikes in polarization voltage. This phenomenon transforms the stable measurement signal into a "jumpy" waveform.
Methodology
The researchers employed a dual approach combining physical experiments with numerical simulations:
- Experimental Setup: A 40mm diameter EMF was used to measure sand slurry at a 3% volume concentration across velocities of 2.0, 2.8, and 3.2 m/s. Raw signals were processed using Matlab to generate power spectral density (PSD) curves.
- Numerical Simulation: Using an Euler-Euler multiphase flow model in COMSOL Multiphysics, the team analyzed the boundary layer near the pipe wall ($r/R > 0.8$). This allowed for precise calculation of particle velocity and concentration in the critical region where collisions occur.
Key Insights
The study reveals that slurry noise is characterized as $1/f$ noise (pink noise). While the noise is random, its power spectrum is predictable:
- Kinetic Energy Correlation: Noise intensity ($P$) is directly proportional to the total kinetic energy of particles hitting the electrode. It scales with the number of collisions ($s$) and the square of the local flow velocity ($V^2$).
- Spectral Consistency: On a logarithmic scale, the PSD curve maintains a constant slope. Increasing flow velocity or particle concentration does not alter the shape of the spectrum but shifts the entire curve upward.
Results and Conclusion
The experimental data showed strong agreement with theoretical predictions. For instance, increasing the velocity from 2 m/s to 3.2 m/s resulted in a 3.98-fold increase in noise intensity, closely matching the predicted 3.65-fold increase. The vertical intercept of the PSD moved from -27 dB to -21 dB, quantifying the noise floor rise.
By characterizing slurry noise as a $1/f$ signal tied to particle kinetic energy, this research provides a foundation for developing advanced digital filters and optimized electrode geometries to enhance the accuracy of EMFs in challenging industrial environments.
Summary updated