A CMOS Pressure Sensor Tag Chip for Passive Wireless Applications

Fangming Deng, Yigang He, Bing Li, Lei Zuo, Xiang Wu, Zhihui FuSensors 2015 · DOI

TL;DR

This paper presents a novel, monolithic CMOS pressure sensor tag for passive wireless applications, integrating a capacitive pressure sensor, a three-stage rectifier for power conversion, and a fully-digital sensor interface. The design achieves excellent linearity and low power consumption, making it suitable for the growing Internet of Things and smart sensing applications.

What Problem Does This Paper Address?

Traditional pressure sensors, while effective, often require separate signal processing circuits, leading to increased parasitic capacitance and reduced performance. Integrating sensing and processing onto a single chip is desirable for miniaturization and cost reduction. Furthermore, passive RFID tags, which harvest energy from readers, are ideal for battery-less applications but are highly sensitive to power consumption. This paper addresses the challenge of creating a low-power, integrated pressure sensor tag that can operate wirelessly and passively, extending the capabilities of RFID technology into sensing applications.

Methods

The core of the system is a monolithic CMOS pressure sensor fabricated using a standard 0.18 µm CMOS process with post-MEMS processing for releasing the sensing membrane. This capacitive sensor utilizes a moving membrane to alter the gap between electrodes, changing capacitance.

For power, a three-stage rectifier based on the Dickson architecture is employed. This design incorporates auxiliary floating rectifier cells to boost the gate voltage of switching transistors, significantly improving Power Conversion Efficiency (PCE) at low input power levels, crucial for passive tags.

The sensor interface is a fully-digital design based on phase-locked loop (PLL) theory. It comprises a Sensor-Controlled Oscillator (SCO), a Digital-Controlled Oscillator (DCO), and a Phase Detector (PD). The sensor's capacitance directly influences the SCO's frequency, and the PD compares this to the DCO's frequency, generating a digital output signal that represents the capacitance. This approach avoids the need for a voltage regulator, further reducing power consumption and enhancing immunity to supply voltage variations.

Datasets

Not discussed in the paper. The paper focuses on the design and characterization of a novel integrated circuit.

Key Insights and Ideas

  • Integrated Sensing and Wireless Communication: The paper demonstrates the feasibility of integrating a MEMS-based pressure sensor directly onto an RFID tag chip, enabling wireless pressure sensing without external power.
  • High PCE Rectifier for Low Power: The novel three-stage rectifier design with auxiliary floating rectifier cells is a key innovation, achieving a significant PCE of 53% at a low input power of -20 dBm. This is critical for maximizing the reading distance of passive tags.
  • Fully-Digital Sensor Interface: The use of a PLL-based, fully-digital sensor interface simplifies the design, reduces power consumption, and provides inherent immunity to supply voltage fluctuations, making it robust for passive applications.
  • CMOS MEMS Integration: The successful integration of MEMS fabrication processes with standard CMOS technology for the pressure sensor element is a significant achievement, paving the way for cost-effective, mass-producible smart sensors.

Key Results

  • Pressure Sensor: Achieves excellent linearity with a sensitivity of 1.2 fF/kPa over a range of 0 to 600 kPa. The capacitance variation is from 0.8 pF to 1.52 pF.
  • Rectifier: Achieves a Power Conversion Efficiency (PCE) of 53% at an input power of -20 dBm, and provides 0.6 V output voltage at this low input power.
  • Sensor Interface: Operates at an ultra-low supply voltage of 0.8 V with a power dissipation of 0.8 µW. It achieves a 7.4 bits resolution.
  • Total Power Dissipation: The entire passive wireless pressure sensor tag consumes a total of 3.2 µW.
  • Hysteresis: The sensor interface shows minimal hysteresis, with a small error between increasing and decreasing pressure measurements.

Limitations and Future Work

  • No Digital Components/Addressing: The current design does not include digital processing blocks for data interpretation or an addressing function, which limits its direct use in complex RFID systems. The authors identify this as a topic for future work.
  • Moderate ENOB: While the sensor interface is energy-efficient, its Effective Number Of Bits (ENOB) is moderate compared to some other designs.
  • Fabrication Process Variations: The paper notes that deviations in capacitance measurements between sample chips are attributed to fabricating process variations, suggesting that further process control or calibration mechanisms might be beneficial.

Future work will likely focus on incorporating digital components for data processing and implementing an addressing function to create a fully functional smart RFID tag. Further optimization of the sensor and interface for even lower power consumption and higher resolution will also be important directions.

Summary updated

BibTeX
@article{deng2015cmos,
  author = {Fangming Deng and Yigang He and Bing Li and Lei Zuo and Xiang Wu and Zhihui Fu},
  title = {{A CMOS Pressure Sensor Tag Chip for Passive Wireless Applications}},
  journal = {Sensors},
  year = {2015},
  doi = {10.3390/s150306872},
}
Figure