A CMOS Optoelectronic Receiver IC with an On-Chip Avalanche Photodiode for Home-Monitoring LiDAR Sensors

Ji-Eun Joo, Myung-Jae Lee, Sung Min Park2021 · DOI

TL;DR

This paper presents a novel CMOS optoelectronic receiver IC that integrates an on-chip Avalanche Photodiode (APD) for home-monitoring LiDAR applications. By overcoming the limitations of discrete APDs and off-chip integration, this design offers a compact, low-cost, and power-efficient solution for 3D imaging in smart homes.

What Problem Does This Paper Address?

LiDAR (Light Detection and Ranging) sensors are increasingly valuable for 3D imaging in various fields, including home monitoring for elder care. However, current LiDAR systems often rely on off-chip APDs, which increases cost, packaging complexity, and can degrade signal integrity due to bondwires and the need for external ESD protection. Integrating an APD directly onto the receiver (Rx) chip is desirable to address these issues. Yet, on-chip CMOS APDs traditionally suffer from lower responsivity and limited bandwidth compared to their discrete counterparts. This paper tackles the challenge of creating a high-performance, integrated optoelectronic receiver IC using a standard CMOS process that can overcome these inherent limitations for home-monitoring LiDAR applications.

Methods

The core innovation lies in the integration of an on-chip CMOS P+/N-well APD with a custom-designed receiver IC. To compensate for the APD's limitations, the Rx IC employs several advanced circuit techniques:

  • On-Chip P+/N-well APD: This architecture is designed to achieve significant avalanche gain while minimizing signal distortion and ESD issues by integrating the APD directly into the CMOS process. The P+ contacts are strategically placed to avoid the P-substrate, reducing slow diffusion currents.
  • Feedforward Transimpedance Amplifier (TIA): This front-end amplifier is crucial for recovering weak signals from the APD. It utilizes a feedforward architecture to achieve high transimpedance gain and low noise current spectral density, essential for minimizing the Minimum Detectable Signal (MDS). Differential signaling is used for common-mode noise rejection.
  • Limiting Amplifier (LA) with Negative Impedance Compensation: A three-stage limiting amplifier boosts the signal to levels suitable for a Time-to-Digital Converter (TDC). Negative impedance compensation techniques are employed to achieve a wide bandwidth and high voltage gain, overcoming the limitations of conventional differential amplifiers in terms of voltage headroom. An offset cancellation network is also included.
  • Output Buffer (OB): A standard output buffer provides a 50-Ω impedance match for interfacing with subsequent off-chip circuitry.

Datasets

Not discussed in the paper. The performance evaluation relies on measurements from fabricated test chips.

Key Insights and Ideas

  • On-chip APD Integration is Feasible and Beneficial: The paper demonstrates that integrating a CMOS APD directly onto the receiver IC is a viable approach to reduce cost and complexity, especially for multi-channel systems.
  • Circuit Design is Key to Overcoming APD Limitations: The success of this integrated solution hinges on sophisticated circuit design, particularly the feedforward TIA and the negative impedance compensated LA, which effectively mitigate the inherent performance drawbacks of on-chip CMOS APDs.
  • Targeted Performance for Home LiDAR: The design prioritizes specifications crucial for home-monitoring LiDAR (e.g., 10m range, low power) rather than aiming for the extreme performance required in automotive or industrial applications, making it a practical and cost-effective solution.
  • Balancing Gain and Bandwidth: The paper highlights the trade-offs between high gain (needed for weak signals) and wide bandwidth (needed for high-speed operation) and how the proposed circuit techniques achieve a favorable balance.

Key Results

The fabricated optoelectronic Rx IC demonstrates impressive performance for its intended application:

  • Differential Transimpedance Gain: 93.4 dBΩ
  • Bandwidth: 790 MHz
  • On-chip APD Responsivity: 2.72 A/W at 11.05 V reverse bias
  • Input-Referred Noise Current Spectral Density: 12 pA/√Hz
  • Minimum Detectable Signal (MDS): 6.74 µApp
  • Maximum Detection Range: 10 m (estimated)
  • Power Dissipation: 56.5 mW from a 1.8-V supply
  • Chip Core Area: 522 × 171 µm²

The eye-diagram measurements confirm clean and wide eyes up to 800 Mb/s operation.

Limitations and Future Work

  • Wavelength Limitation: The paper notes that silicon CMOS APDs are restricted to the 850 nm wavelength. While suitable for many indoor applications, this limits its use in scenarios requiring different wavelengths.
  • Noise Performance: While the noise performance is adequate for the 10m range, the paper acknowledges that on-chip CMOS APDs generally have inferior noise performance compared to discrete APDs. This "noise degradation" is deemed acceptable for the target application but might be a limitation for longer-range or more sensitive LiDAR systems.
  • Future Work: The authors suggest that this work provides a low-cost, low-power solution for short-range indoor LiDAR sensors. Future work could explore extending the detection range, improving noise performance further, or adapting the design for different wavelengths or higher data rates.

Summary updated

BibTeX
@misc{joo2021cmos,
  author = {Ji-Eun Joo and Myung-Jae Lee and Sung Min Park},
  title = {{A CMOS Optoelectronic Receiver IC with an On-Chip Avalanche Photodiode for Home-Monitoring LiDAR Sensors}},
  year = {2021},
  doi = {10.3390/s21134364},
}

Loading related content...

Figure